Lebesgue's universal covering problem


Lebesgue's universal covering problem is an unsolved problem in geometry that asks for the convex shape of smallest area that can cover any planar set of diameter one. The diameter of a set by definition is the least upper bound of the distances between all pairs of points in the set. A shape covers a set if it contains a congruent subset. In other words the set may be rotated, translated or reflected to fit inside the shape.
The problem was posed by Henri Lebesgue in a letter to Gyula Pál in 1914. It was published in a paper by Pál in 1920 along with Pál's analysis. He showed that a cover for all curves of constant width one is also a cover for all sets of diameter one and that a cover can be constructed by taking a regular hexagon with an inscribed circle of diameter one and removing two corners from the hexagon to give a cover of area.

Known bounds

In 1936 Roland Sprague showed that a part of Pál's cover could be removed near one of the other corners while still retaining its property as a cover. This reduced the upper bound on the area to. In 1992 Hansen showed that two more very small regions of Sprague's solution could be removed bringing the upper bound down to. Hansen's construction was the first to make use of the freedom to use reflections. In 2015 John Baez, Karine Bagdasaryan and Philip Gibbs showed that if the corners removed in Pál's cover are cut off at a different angle then it is possible to reduce the area further giving an upper bound of.
In October 2018 Philip Gibbs published a paper on arXiv using high-school geometry and claiming a further reduction to 0.8440935944.
The best known lower bound for the area was provided by Peter Brass and Mehrbod Sharifi using a combination of three shapes in optimal alignment giving.