Lamm equation
The Lamm equation describes the sedimentation and diffusion of a solute under ultracentrifugation in traditional sector-shaped cells. It was named after Ole Lamm, later professor of physical chemistry at the Royal Institute of Technology, who derived it during his Ph.D. studies under Svedberg at Uppsala University.
The Lamm equation can be written:
where c is the solute concentration, t and r are the time and radius, and the parameters D, s, and ω represent the solute diffusion constant, sedimentation coefficient and the rotor angular velocity, respectively. The first and second terms on the right-hand side of the Lamm equation are proportional to D and sω2, respectively, and describe the competing processes of diffusion and sedimentation. Whereas sedimentation seeks to concentrate the solute near the outer radius of the cell, diffusion seeks to equalize the solute concentration throughout the cell. The diffusion constant D can be estimated from the hydrodynamic radius and shape of the solute, whereas the buoyant mass mb can be determined from the ratio of s and D
where kBT is the thermal energy, i.e.,
Boltzmann's constant kB multiplied by
the temperature T in kelvins.
Solute molecules cannot pass through the inner and outer walls of the
cell, resulting in the boundary conditions on the Lamm equation
at the inner and outer radii, ra and rb, respectively. By spinning samples at constant angular velocity ω and observing the variation in the concentration c, one may estimate the parameters s and D and, thence, the buoyant mass of the solute.Derivation of the Lamm equation
Faxén solution (no boundaries, no diffusion)
