Japanese sword


A Japanese sword is one of several types of traditionally made swords from Japan. Swords have been made from as early as the Kofun period, though most people generally refer to the curved blades made after the Heian period when speaking of "Japanese swords". There are many types of Japanese swords that differ by size, shape, field of application and method of manufacture. Some of the more commonly known types of Japanese swords are the katana, tsurugi, wakizashi, odachi, and tachi.

Types

The type classifications for Japanese swords indicate the combination of a blade and its mounts as this, then, determines the style of use of the blade. An unsigned and shortened blade that was once made and intended for use as a tachi may be alternately mounted in tachi koshirae and katana koshirae. It is properly distinguished, then, by the style of mount it currently inhabits. A long tanto may be classified as a wakizashi due to its length being over 30 cm, however it may have originally been mounted and used as a tanto making the length distinction somewhat arbitrary but necessary when referring to unmounted short blades. When the mounts are taken out of the equation, a tanto and wakizashi will be determined by length under or over 30 cm unless their intended use can be absolutely determined or the speaker is rendering an opinion on the intended use of the blade. In this way, a blade formally attributed as a wakizashi due to length may be informally discussed between individuals as a tanto because the blade was made during an age where tanto were popular and the wakizashi as a companion sword to katana did not yet exist.
The following are types of Japanese swords:
There are bladed weapons made in the same traditional manner as Japanese swords, which are not swords, but which are still nihontō :
Other edged weapons or tools that are made using the same methods as Japanese swords:
The production of swords in Japan is divided into time periods:
In modern times the most commonly known type of Japanese sword is the Shinogi-Zukuri katana, which is a single-edged and usually curved longsword traditionally worn by samurai from the 15th century onwards. Other types of Japanese swords include: tsurugi or, which is a double-edged sword; ōdachi, tachi, which are older styles of a very long single-edged sword; wakizashi, a medium-sized sword and tantō which is an even smaller knife-sized sword. Naginata and yari despite being polearms are still considered to be swords.
Japanese swords are still commonly seen today, antique and modern forged swords can easily be found and purchased. Modern, authentic nihontō are made by a few hundred swordsmiths. Many examples can be seen at an annual competition hosted by the All Japan Swordsmith Association, under the auspices of the Nihontō Bunka Shinkō Kyōkai.
Western historians have said that Japanese katana were among the finest cutting weapons in world military history, for their intended use.

Etymology

The word katana was used in ancient Japan and is still used today, whereas the old usage of the word nihontō is found in the poem, the Song of Nihontō, by the Song dynasty poet Ouyang Xiu. The word nihontō became more common in Japan in the late Tokugawa shogunate. Due to importation of Western swords, the word nihontō was adopted in order to distinguish it from the Western sword.
Meibutsu is a special designation given to sword masterpieces which are listed in a compilation from the 18th century called the "Kyoho Meibutsucho". The swords listed are Koto blades from several different provinces, 100 of the 166 swords listed are known to exist today with Soshu blades being very well represented. The "Kyoho Meibutsucho" also listed the nicknames, prices, history and length of the Meibutsu with swords by Yoshimitsu, Masamune, Yoshihiro, and Sadamune being very highly priced.

Anatomy

Blade

Each blade has a unique profile, mostly dependent on the swordsmith and the construction method. The most prominent part is the middle ridge, or shinogi. In the earlier picture, the examples were flat to the shinogi, then tapering to the blade edge. However, swords could narrow down to the shinogi, then narrow further to the blade edge, or even expand outward towards the shinogi then shrink to the blade edge. A flat or narrowing shinogi is called shinogi-hikushi, whereas a flat blade is called a shinogi-takushi.
The shinogi can be placed near the back of the blade for a longer, sharper, more fragile tip or a more moderate shinogi near the center of the blade.
The sword also has an exact tip shape, which is considered an extremely important characteristic: the tip can be long, medium, short, or even hooked backwards. In addition, whether the front edge of the tip is more curved or straight is also important.
The ' is not usually a "chisel-like" point, and the Western knife interpretation of a "tantō point" is rarely found on true Japanese swords; a straight, linearly sloped point has the advantage of being easy to grind, but less stabbing/piercing capabilities compared to traditional Japanese kissaki Fukura types. Kissaki usually have a curved profile, and smooth three-dimensional curvature across their surface towards the edge—though they are bounded by a straight line called the yokote and have crisp definition at all their edges. While the straight tip on the "American tanto" is identical to traditional Japanese fukura, two characteristics set itself apart from Japanese sword makes; The absolute lack of curve only possible with modern tools, and the use of the word "tanto" in the nomenclature of the western tribute is merely a nod to the Japanese word for knife or short sword, rather than a tip style.
Although it is not commonly known, the "chisel point" kissaki originated in Japan. Examples of such are shown in the book "The Japanese Sword" by Kanzan Sato. Because American bladesmiths use this design extensively it is a common misconception that the design originated in America.
A hole is punched through the tang ', called a '. It is used to anchor the blade using a ', a small bamboo pin that is inserted into another cavity in the handle ' and through the mekugi-ana, thus restricting the blade from slipping out. To remove the handle one removes the mekugi. The swordsmith's signature ' is carved on the tang.

Mountings

In Japanese, the scabbard is referred to as a ', and the handguard piece, often intricately designed as an individual work of art—especially in later years of the Edo period—was called the tsuba. Other aspects of the mountings, such as the ', ', ' and ', ', ', ' lacquer, and , received similar levels of artistry.

Signature and date

The mei is the signature inscribed on to the tang of the Japanese sword. Fake signatures are common not only due to centuries of forgeries but potentially misleading ones that acknowledge prominent smiths and guilds, and those commissioned to a separate signer.
Sword scholars collect and study oshigata, or paper tang-rubbings, taken from a blade:
to identify the mei, the hilt is removed and the sword is held point side up. The mei is chiseled onto the tang on the side which traditionally faces away from the wearer's body while being worn; since the katana and wakizashi are always worn with the cutting-edge up, the edge should be held to the viewer's left. The inscription will be viewed as kanji on the surface of the tang: the first two kanji represent the province; the next pair is the smith; and the last, when present, is sometimes a variation of 'made by', or, 'respecfully'. The date will be inscribed near the mei, either with the reign name; the Zodiacal Method; or those calculated from the reign of the legendary Emperor Jimmu, dependent upon the period.

Classification

Length

What generally differentiates the different swords is their length. Japanese swords are measured in units of shaku. Since 1891, the modern Japanese shaku is approximately equal to a foot, calibrated with the meter to equal exactly 10 meters per 33 shaku.
However the historical shaku was slightly longer. Thus, there may sometimes be confusion about the blade lengths, depending on which shaku value is being assumed when converting to metric or U.S. customary measurements.
The three main divisions of Japanese blade length are:
A blade shorter than one shaku is considered a tantō. A blade longer than one shaku but less than two is considered a shōtō. The wakizashi and kodachi are in this category. The length is measured in a straight line across the back of the blade from tip to munemachi. Most blades that fall into the "shōtō" size range are wakizashi. However, some daitō were designed with blades slightly shorter than 2 shaku. These were called kodachi and are somewhere in between a true daitō and a wakizashi. A shōtō and a daitō together are called a daishō. The daishō was the symbolic armament of the Edo period samurai.
A blade longer than two shaku is considered a daitō, or long sword. To qualify as a daitō the sword must have a blade longer than 2 shaku in a straight line. While there is a well defined lower-limit to the length of a daitō, the upper limit is not well enforced; a number of modern historians, swordsmiths, etc. say that swords that are over 3 shaku in blade length are "longer than normal daitō" and are usually referred to or called ōdachi. The word "daitō" is often used when explaining the related terms shōtō and daishō. Miyamoto Musashi refers to the long sword in The Book of Five Rings. He is referring to the katana in this, and refers to the nodachi and the odachi as "extra-long swords".
Before about 1500 most swords were usually worn suspended from cords on a belt, edge-down. This style is called jindachi-zukuri, and daitō worn in this fashion are called tachi. From 1600 to 1867, more swords were worn through an obi, paired with a smaller blade; both worn edge-up. This style is called buke-zukuri, and all daitō worn in this fashion are katana, averaging 70–74 cm in blade length. However, nihontō of longer lengths also existed, including lengths up to 78 cm.
It was not simply that the swords were worn by cords on a belt, as a 'style' of sorts. Such a statement trivializes an important function of such a manner of bearing the sword. It was a very direct example of 'form following function.' At this point in Japanese history, much of the warfare was fought on horseback. Being so, if the sword or blade were in a more vertical position, it would be cumbersome, and awkward to draw. Suspending the sword by 'cords,' allowed the sheath to be more horizontal, and far less likely to bind while drawing it in that position.
Abnormally long blades, usually carried across the back, are called ōdachi or nodachi. The word ōdachi is also sometimes used as a synonym for nihontō. Odachi means "great sword", and Nodachi translates to "field sword". These greatswords were used during war as the longer sword gave a foot soldier a reach advantage. These swords are now illegal in Japan. Citizens are not allowed to possess an odachi unless it is for ceremonial purposes.
Here is a list of lengths for different types of blades:
Blades whose length is next to a different classification type are described with a prefix 'O-' or 'Ko-', e.g. a Wakizashi with a length of 59 cm is called an O-wakizashi whereas a Katana with 61 cm is called a Ko-Katana.
Since 1867, restrictions and/or the deconstruction of the samurai class meant that most blades have been worn jindachi-zukuri style, like Western navy officers. Since 1953, there has been a resurgence in the buke-zukuri style, permitted only for demonstration purposes.

School

Most old Japanese swords can be traced back to one of five provinces, each of which had its own school, traditions, and "trademarks". These schools are known as Gokaden. These traditions and provinces are as follows:
In the Kotō era there were several other schools that did not fit within the Five Traditions or were known to mix elements of each Gokaden, and they were called wakimono. There were 19 commonly referenced wakimono.

History

The production of swords in Japan is divided into specific time periods: jokoto, koto, shinto, shinshinto, gendaito, and shinsakuto.

Early history

Early examples of swords were straight chokutō or jōkotō and others with unusual shapes, some of styles and techniques probably are derived from Chinese dao, and some of them are directly imported through trade.
Swords forged between 987 and 1597 are called kotō ; these are considered the pinnacle of Japanese swordcraft. Early models had uneven curves with the deepest part of the curve at the hilt. As eras changed the center of the curve tended to move up the blade.
The predecessor of the Japanese sword has been called "Warabite sword", It had been manufactured by Emishi persons in Tōhoku region. In the middle of the Heian period, samurai improved on the Warabite to develop Kenukigatatati -early Japanese sword-.
The Japanese sword known today with its deep, graceful curve has its origin in shinogi-zukuri tachi which were developed sometime around the middle of the Heian period to service the need of the growing military class. Its shape reflects the changing form of warfare in Japan. Cavalry were now the predominant fighting unit and the older straight chokutō were particularly unsuitable for fighting from horseback. The curved sword is a far more efficient weapon when wielded by a warrior on horseback where the curve of the blade adds considerably to the downward force of a cutting action.
The tachi is a sword which is generally larger than a katana, and is worn suspended with the cutting edge down. This was the standard form of carrying the sword for centuries, and would eventually be displaced by the katana style where the blade was worn thrust through the belt, edge up. The tachi was worn slung across the left hip. The signature on the tang of the blade was inscribed in such a way that it would always be on the outside of the sword when worn. This characteristic is important in recognizing the development, function, and different styles of wearing swords from this time onwards.
When worn with full armour, the tachi would be accompanied by a shorter blade in the form known as koshigatana ; a type of short sword with no handguard, and where the hilt and scabbard meet to form the style of mounting called an aikuchi. Daggers, were also carried for close combat fighting as well as carried generally for personal protection.
The Mongol invasions of Japan in the 13th century spurred further evolution of the Japanese sword. It turned out that the tachi that samurai had used until then had a thick and heavy blade, which was inconvenient to fight against a large number of enemies in close combat. Also, because Tachi until then had been made with emphasis on hardness and lacked flexibility, it was easy to break or chip the blade, and it turned out to be difficult to regrind when the blade was chipped. In response to this, a new method of manufacturing Japanese swords was developed, and an innovative sword of the Sōshū school was born. The swordsmiths at the Sōshū school combined hard and soft steel to make blades, and by optimizing the temperature and timing of heating and cooling the blades, they realized stronger blades. The sword of the Sōshū school is thin and light, but flexible and sturdy, and it has a gentle curve and a sharp point, so it has an increased penetrating ability. The most famous swordsmith in the Sōshū school is Masamune.
In the Nanboku-chō period in the 14 century, huge Japanese swords such as ōdachi became popular. The reason for this is thought to be that the conditions for making a practical large-sized sword were established due to the nationwide spread of strong and sharp swords of the Sōshū school. In the case of ōdachi whose blade was 150 cm long, it was impossible to draw a sword from the scabbard on the waist, so people carried it on their back or had their servants carry it. Large naginata and kanabō were also popular in this period.
By the 15th century, the Sengoku Jidai civil war erupted, and the vast need for swords together with the ferocity of the fighting caused the highly artistic techniques of the Kamakura period to be abandoned in favor of more utilitarian and disposable weapons. The export of nihontō reached its height during the Muromachi period when at least 200,000 swords were shipped to Ming Dynasty China in official trade in an attempt to soak up the production of Japanese weapons and make it harder for pirates in the area to arm.
In the 15th and 16th centuries, samurai who increasingly found a need for a sword for use in closer quarters along with increasing use of foot-soldiers armed with spears led to the creation of the uchigatana, in both one-handed and two-handed forms. As the Sengoku civil wars progressed, the uchigatana evolved into the modern katana, and replaced the tachi as the primary weapon of the samurai, especially when not wearing armor. Many longer tachi were shortened in the 15th–17th centuries to meet the demand for katana.
The craft decayed as time progressed and firearms were introduced as a decisive force on the battlefield. At the end of the Muromachi period, the Tokugawa shōguns issued regulations controlling who could own and carry swords, and effectively standardized the description of a nihontō.

New swords

In times of peace, swordsmiths returned to the making of refined and artistic blades, and the beginning of the Momoyama period saw the return of high quality creations. As the techniques of the ancient smiths had been lost during the previous period of war, these swords were called shintō, literally "new swords". Generally they are considered inferior to most kotō, and coincide with a decline in manufacturing skills. As the Edo period progressed, blade quality declined, though ornamentation was refined. Originally, simple and tasteful engravings known as horimono were added for religious reasons. Later, in the more complex work found on many shintō, form no longer strictly followed function.
Under the Tokugawa shogunate, swordmaking and the use of firearms declined. The master swordsmith Suishinshi Masahide published opinions that the arts and techniques of the shintō swords were inferior to the kotō blades, and that research should be made by all swordsmiths to rediscover the lost techniques. Masahide traveled the land teaching what he knew to all who would listen, and swordsmiths rallied to his cause and ushered in a second renaissance in Japanese sword smithing. With the discarding of the shintō style, and the re-introduction of old and rediscovered techniques, swords made in the kotō style between 1761 and 1876 are shinshintō, "new revival swords" or literally "new-new swords." These are considered superior to most shintō, but inferior to true kotō.
The arrival of Matthew Perry in 1853 and the subsequent Convention of Kanagawa forcibly reintroduced Japan to the outside world; the rapid modernization of the Meiji Restoration soon followed. The Haitōrei Edict in 1876 all but banned carrying swords and guns on streets. Overnight, the market for swords died, many swordsmiths were left without a trade to pursue, and valuable skills were lost. The nihontō remained in use in some occupations such as the police force. At the same time, kendo was incorporated into police training so that police officers would have at least the training necessary to properly use one.
In time, it was rediscovered that soldiers needed to be armed with swords, and over the decades at the beginning of the 20th century swordsmiths again found work. These swords, derisively called guntō, were often oil-tempered, or simply stamped out of steel and given a serial number rather than a chiseled signature. The mass-produced ones often look like Western cavalry sabers rather than nihontō, with blades slightly shorter than blades of the shintō and shinshintō periods.
Military swords hand made in the traditional way are often termed as gendaitō. The craft of making swords was kept alive through the efforts of a few individuals, notably Gassan Sadakazu and Gassan Sadakatsu, who were employed as Imperial artisans. These smiths produced fine works that stand with the best of the older blades for the Emperor and other high-ranking officials. The students of Sadakatsu went on to be designated Intangible Cultural Assets, "Living National Treasures," as they embodied knowledge that was considered to be fundamentally important to the Japanese identity. In 1934 the Japanese government issued a military specification for the shin guntō, the first version of which was the Type 94 Katana, and many machine- and hand-crafted swords used in World War II conformed to this and later shin guntō specifications.

Cultural and social significance

The events of Japanese society have shaped the craft of sword making, as has the sword itself influenced the course of cultural and social development within the nation.
The Museum of Fine Arts states that when an artisan plunged the newly crafted sword into the cold water, a portion of his spirit was transferred into the sword. His spirit, morals and state of mind at the time became crucial to the defining of the swords moral and physical characteristics
During the Jōmon Period swords resembled iron knife blades and were used for hunting, fishing and farming. There is the idea that swords were more than a tool during the Jōmon period, no swords have been recovered to back this hypothesis.
The Yayoi Period saw the establishment of villages and the cultivation of rice farming within Japan. Rice farming came as a result of Chinese and Korean influence, they were the first group of people to introduce swords into the Japanese Isles. Subsequently, bronze swords were used for religious ceremonies. The Yayoi period saw swords be used primarily for religious and ceremonial purposes.
During the Kofun Period Animism was introduced into Japanese society. Animism is the belief that everything in life contains or is connected to a divine spirits. This connection to the spirit world premediates the introduction of Buddhism into Japan. During this time, China was craving steel blades on the Korean Peninsula. Japan saw this as a threat to national security and felt the need to develop their military technology. As a result, clan leaders took power as military elites, fighting one another for power and territory. As dominant figures took power, loyalty and servitude became an important part of Japanese life – this became the catalyst for the honour culture that is often affiliated with Japanese people.
In the Edo period, swords gained prominence in everyday life as the “most important” part of a warrior's amour. The Edo era saw swords became a mechanism for bonding between Daimyo and Samurai. Daimyo would gift samurai's with swords as a token of their appreciation for their services. In turn, samurai would gift Daimyo swords as a sign of respect, most Daimyo would keep these swords as family heirlooms. In this period, it was believed that swords were multifunctional; in spirit they represent proof of military accomplishment, in practice they are coveted weapons of war and diplomatic gifts.
The peace of the Edo period saw the demand for swords fall. To retaliate, in 1719 the eighth Tokugawa shogun, Yoshimune, compiled a list of “most famous swords”. Masamune, Awatacuchi Yoshimitsu, and Go no Yoshihiro were dubbed the “Three Famous Smiths”, their swords became sought after by the Daimyo. The prestige and demand for these status symbols spiked the price for these fine pieces.
During the Late-Edo period, Suishinshi Masahide wrote that swords should be less extravagant. Swords began to be simplified and altered to be durable, sturdy and made to cut well. In 1543 guns arrived in Japan, changing military dynamic and practicality of swords and samurai's. This period also saw introduction of martial arts as a means to connecting to the spirit world and allowed common people to participate in samurai culture.
The Meiji Period saw the dissolution of the samurai class, after foreign powers demanded Japan open their borders to international trade - 300-hundred years of Japanese isolation came to an end. In 1869 and 1873, two petition were submitted to government to abolish the custom of sword wearing because people feared the outside world would view swords as a “tool for bloodshed” and would consequentially associate Japanese people as violent. Haitōrei outlawed and prohibited wearing swords in public, with the exception for those in the military and government official; swords lost their meaning within society. Emperor Meiji was determined to westernize Japan with the influence of American technological and scientific advances; however, he himself appreciated the art of sword making. The Meiji era marked the final moments of samurai culture, as samurai's were no match for conscript soldiers who were trained to use westerns firearms. Some samurai found it difficult to assimilate to the new culture as they were forced to give up their privileges, while others preferred this less-hierarchical way of life. Even with the ban, the Sino-Japanese War saw Japanese troops wear swords into battle, not for practical use but for symbolic reasons.
The Meiji era also saw the integration of Buddhism into Shinto Japanese beliefs. Swords were no longer necessary, in war or lifestyle, and those who practiced martial arts became the “modern samurai” – young children were still groomed to serve the emperor and put loyalty and honour above all else, as this new era of rapid development required loyal, hard working men. The practice of sword making was prohibited, thus swords during the Meiji period were obsolete and a mere symbol of status. Swords were left to rust, sold or melted into more ‘practical’ objects for everyday life.
Prior to and during WWII, even with the modernization of the army, the demand for swords exceeded the number of swordsmiths still capable of making them. As a result, swords of this era are of poor quality. In 1933, during the Shōwa era, a sword making factory designed to re-establish the “spirit of Japan” through the art of sword making was built to preserve the legacy and art of swordsmiths and sword making. The government at the time feared that the warrior spirit was disappearing within Japan, along with the integrity and quality of swords.
Heisei era, for a portion of the US occupation of Japan, sword making, swordsmiths and wielding of swords was prohibited. As a means to preserve their warrior culture, martial arts became was put into school curriculum. In 1953, America finally lifted the ban on swords after realizing that sword making is an important cultural asset to preserving Japanese history and legacy.

Religion, honour and mythology

The origins of Japanese swords and their effects and influence on society differs depending on the story that is followed.
"The blade represents the juncture where the wisdom of leaders and gods intersects with the commoner. The sword represents the implement by which societies are managed. The effectiveness of the sword as a tool and the societal beliefs surrounding it both lift the sword to the pinnacle of warrior symbolism."
There is a rich relationship between swords, Japanese culture, and societal development. The different interpretations of the origins of swords and their connection to the spirit world, each hold their own merit within Japanese society, past and present. Which one and how modern-day samurai interpret the history of swords, help influence the kind of samurai and warrior they choose to be.

Post samurai military swords

Recent history and modern use

Under the United States occupation at the end of World War II all armed forces in occupied Japan were disbanded and production of nihontō with edges was banned except under police or government permit. The ban was overturned through a personal appeal by Dr. Junji Honma. During a meeting with General Douglas MacArthur, Honma produced blades from the various periods of Japanese history and MacArthur was able to identify very quickly what blades held artistic merit and which could be considered purely weapons. As a result of this meeting, the ban was amended so that guntō weapons would be destroyed while swords of artistic merit could be owned and preserved. Even so, many nihontō were sold to American soldiers at a bargain price; in 1958 there were more Japanese swords in America than in Japan. The vast majority of these one million or more swords were guntō, but there were still a sizable number of older swords.
After the Edo period, swordsmiths turned increasingly to the production of civilian goods. The Occupation and its regulations almost put an end to the production of nihonto. A few smiths continued their trade, and Honma went on to be a founder of the Society for the Preservation of the Japanese Sword, who made it their mission to preserve the old techniques and blades. Thanks to the efforts of other like-minded individuals, the nihontō did not disappear, many swordsmiths continued the work begun by Masahide, and the old swordmaking techniques were rediscovered.
Modern swords manufactured according to traditional methods are usually known as shinsakutō, meaning "newly made swords". Alternatively, they can be termed shinken when they are designed for combat as opposed to iaitō training swords.
Due to their popularity in modern media, display-only "nihontō" have become widespread in the sword marketplace. Ranging from small letter openers to scale replica "wallhangers", these items are commonly made from stainless steel or poor at holding an edge ) and have either a blunt or very crude edge. There are accounts of good quality stainless steel nihontō, however, these are rare at best. Some replica nihontō have been used in modern-day armed robberies. As a part of marketing, modern ahistoric blade styles and material properties are often stated as traditional and genuine, promulgating disinformation.
In Japan, genuine edged hand-made Japanese swords, whether antique or modern, are classified as art objects and must have accompanying certification in order to be legally owned. Some companies and independent smiths outside Japan produce katana as well, with varying levels of quality.
Prior to WWII Japan had 1.5million swords in the country - 200,000 of which had been manufactured in factories during the Meiji Restoration. As of 2008, only 100,000 swords remain in Japan. It is estimated that 250,000-350,000 sword have been brought to other nations as souvenirs, art pieces or for Museum purposes. 70% of daito, formerly owned by Japanese officers, have been exported or brought to the United States.

Manufacturing

Japanese swords were often forged with different profiles, different blade thicknesses, and varying amounts of grind. Wakizashi, for instance, were not simply scaled-down versions of katana; they were often forged in hira-zukuri or other such forms which were very rare on other swords.
The daishō was not always forged together. If a samurai was able to afford a daishō, it was often composed of whichever two swords could be conveniently acquired, sometimes by different smiths and in different styles. Even when a daishō contained a pair of blades by the same smith, they were not always forged as a pair or mounted as one. Daishō made as a pair, mounted as a pair, and owned/worn as a pair, are therefore uncommon and considered highly valuable, especially if they still retain their original mountings.
The forging of a Japanese blade typically took weeks or even months and was considered a sacred art. As with many complex endeavors, rather than a single craftsman, several artists were involved. There was a smith to forge the rough shape, often a second smith to fold the metal, a specialist polisher as well as the various artisans that made the koshirae including the tsuka, fuchi, kashira, and tsuba ). It is said that the sharpening and polishing process takes just as long as the forging of the blade itself.
The legitimate Japanese sword is made from Japanese steel "Tamahagane". The most common lamination method the Japanese sword blade is formed from is a combination of two different steels: a harder outer jacket of steel wrapped around a softer inner core of steel. This creates a blade which has a hard, razor sharp cutting edge with the ability to absorb shock in a way which reduces the possibility of the blade breaking when used in combat. The hadagane, for the outer skin of the blade, is produced by heating a block of raw steel, which is then hammered out into a bar, and the flexible back portion. This is then cooled and broken up into smaller blocks which are checked for further impurities and then reassembled and reforged. During this process the billet of steel is heated and hammered, split and folded back upon itself many times and re-welded to create a complex structure of many thousands of layers. Each different steel is folded differently, in order to provide the necessary strength and flexibility to the different steels. The precise way in which the steel is folded, hammered and re-welded determines the distinctive grain pattern of the blade, the jihada, a feature which is indicative of the period, place of manufacture and actual maker of the blade. The practice of folding also ensures a somewhat more homogeneous product, with the carbon in the steel being evenly distributed and the steel having no voids that could lead to fractures and failure of the blade in combat.
The shingane is of a relatively softer steel with a lower carbon content than the hadagane. For this, the block is again hammered, folded and welded in a similar fashion to the hadagane, but with fewer folds. At this point, the hadagane block is once again heated, hammered out and folded into a ‘U’ shape, into which the shingane is inserted to a point just short of the tip. The new composite steel billet is then heated and hammered out ensuring that no air or dirt is trapped between the two layers of steel. The bar increases in length during this process until it approximates the final size and shape of the finished sword blade. A triangular section is cut off from the tip of the bar and shaped to create what will be the kissaki. At this point in the process, the blank for the blade is of rectangular section. This rough shape is referred to as a sunobe.
The sunobe is again heated, section by section and hammered to create a shape which has many of the recognisable characteristics of the finished blade. These are a thick back, a thinner edge, a curved tip, notches on the edge and back which separate the blade from the tang. Details such as the ridge line another distinctive characteristic of the Japanese sword, are added at this stage of the process. The smith's skill at this point comes into play as the hammering process causes the blade to naturally curve in an erratic way, the thicker back tending to curve towards the thinner edge, and he must skillfully control the shape to give it the required upward curvature. The sunobe is finished by a process of filing and scraping which leaves all the physical characteristics and shapes of the blade recognisable. The surface of the blade is left in a relatively rough state, ready for the hardening processes. The sunobe is then covered all over with a clay mixture which is applied more thickly along the back and sides of the blade than along the edge. The blade is left to dry while the smith prepares the forge for the final heat treatment of the blade, the yaki-ire, the hardening of the cutting edge.
This process takes place in a darkened smithy, traditionally at night, in order that the smith can judge by eye the colour and therefore the temperature of the sword as it is repeatedly passed through the glowing charcoal. When the time is deemed right, the blade is plunged edge down and point forward into a tank of water. The precise time taken to heat the sword, the temperature of the blade and of the water into which it is plunged are all individual to each smith and they have generally been closely guarded secrets. Legend tells of a particular smith who cut off his apprentice's hand for testing the temperature of the water he used for the hardening process. In the different schools of swordmakers there are many subtle variations in the materials used in the various processes and techniques outlined above, specifically in the form of clay applied to the blade prior to the yaki-ire, but all follow the same general procedures.
The application of the clay in different thicknesses to the blade allows the steel to cool more quickly along the thinner coated edge when plunged into the tank of water and thereby develop into the harder form of steel called martensite, which can be ground to razor-like sharpness. The thickly coated back cools more slowly retaining the pearlite steel characteristics of relative softness and flexibility. The precise way in which the clay is applied, and partially scraped off at the edge, is a determining factor in the formation of the shape and features of the crystalline structure known as the hamon. This distinctive tempering line found near the edge is one of the main characteristics to be assessed when examining a blade.
The martensitic steel which forms from the edge of the blade to the hamon is in effect the transition line between these two different forms of steel, and is where most of the shapes, colours and beauty in the steel of the Japanese sword are to be found. The variations in the form and structure of the hamon are all indicative of the period, smith, school or place of manufacture of the sword. As well as the aesthetic qualities of the hamon, there are, perhaps not unsurprisingly, real practical functions. The hardened edge is where most of any potential damage to the blade will occur in battle. This hardened edge is capable of being reground and sharpened many times, although the process will alter the shape of the blade. Altering the shape will allow more resistance when fighting in hand-to-hand combat.
Almost all blades are decorated, although not all blades are decorated on the visible part of the blade. Once the blade is cool, and the mud is scraped off, grooves and markings may be cut into it. One of the most important markings on the sword is performed here: the file markings. These are cut into the tang or the hilt-section of the blade, where they will be covered by the hilt later. The tang is never supposed to be cleaned; doing this can reduce the value of the sword by half or more. The purpose is to show how well the steel ages.
Some other marks on the blade are aesthetic: dedications written in Kanji characters as well as engravings called horimono depicting gods, dragons, or other acceptable beings. Some are more practical. The presence of a groove reduces the weight of the sword yet keeps its structural integrity and strength.

Use

The tachi became the primary weapon on the battlefield during the Kamakura period, used by cavalry. The sword was mostly considered as a secondary weapon until then, used in the battlefield only after the bow and polearm were no longer feasible. During the Edo period samurai went about on foot unarmored, and with much less combat being fought on horseback in open battlefields the need for an effective close quarter weapon resulted in samurai being armed with daishō.
Testing of swords, called tameshigiri, was practiced on a variety of materials to test the sword's sharpness and practice cutting technique.
Kenjutsu is the Japanese martial art of using the nihontō in combat. The nihontō was primarily a cutting weapon, or more specifically, a slicing one. Its moderate curve, however, allowed for effective thrusting as well. The hilt was held with two hands, though a fair amount of one-handed techniques exist. The placement of the right hand was dictated by both the length of the handle and the length of the wielder's arm. Two other martial arts were developed specifically for training to draw the sword and attack in one motion. They are battōjutsu and iaijutsu, which are superficially similar, but do generally differ in training theory and methods.
For cutting, there was a specific technique called "ten-uchi." Ten-uchi refers to an organized motion made by arms and wrist, during a descending strike. As the sword is swung downwards, the elbow joint drastically extends at the last instant, popping the sword into place. This motion causes the swordsman's grip to twist slightly and if done correctly, is said to feel like wringing a towel. This motion itself caused the sword's blade to impact its target with sharp force, and is used to break initial resistance. From there, fluidly continuing along the motion wrought by ten-uchi, the arms would follow through with the stroke, dragging the sword through its target. Because the nihontō slices rather than chops, it is this "dragging" which allows it to do maximum damage, and is thus incorporated into the cutting technique. At full speed, the swing will appear to be full stroke, the sword passing through the targeted object. The segments of the swing are hardly visible, if at all. Assuming that the target is, for example, a human torso, ten-uchi will break the initial resistance supplied by shoulder muscles and the clavicle. The follow through would continue the slicing motion, through whatever else it would encounter, until the blade inherently exited the body, due to a combination of the motion and its curved shape.
Nearly all styles of kenjutsu share the same five basic guard postures. They are as follows; chūdan-no-kamae, jōdan-no-kamae, gedan-no-kamae, hassō-no-kamae, and waki-gamae.
The nihontō's razor-edge was so hard that upon hitting an equally hard or harder object, such as another sword's edge, chipping became a definite risk. As such, blocking an oncoming blow blade-to-blade was generally avoided. In fact, evasive body maneuvers were preferred over blade contact by most, but, if such was not possible, the flat or the back of the blade was used for defense in many styles, rather than the precious edge. A popular method for defeating descending slashes was to simply beat the sword aside. In some instances, an "umbrella block", positioning the blade overhead, diagonally, would create an effective shield against a descending strike. If the angle of the block was drastic enough, the curve of the nihontō's blade would cause the attacker's blade to slide along its counter and off to the side.

Carrying

Japanese swords were carried in several different ways, varying throughout Japanese history. The style most commonly seen in "samurai" movies is called buke-zukuri, with the katana carried edge up, with the sheath thrust through the obi.
The sword would be carried in a sheath and tucked into the samurai's belt. Originally, they would carry the sword with the blade turned down. This was a more comfortable way for the armored samurai to carry his very long sword or to draw while mounted. The bulk of the samurai armor made it difficult to draw the sword from any other place on his body. When unarmored, samurai would carry their sword with the blade facing up. This made it possible to draw the sword and strike in one quick motion. In one such method of drawing the sword, the samurai would turn the sheath downward ninety degrees and pull it out of his sash just a bit with his left hand, then gripping the hilt with his right hand he would slide it out while sliding the sheath back to its original position.

Gallery