Jaguar Mark X


The Jaguar Mark X, later renamed the Jaguar 420G, was British manufacturer Jaguar's top-of-the-range saloon car for a decade, from 1961 to 1970. The large, luxurious Mark X succeeded the Mark IX as the company's top saloon model, and was primarily aimed at the United States market. The company hoped to appeal to heads of state, diplomats and film stars.
Introduced in the same year as Jaguar's iconic E-Type, the Mark X impressed with its technical specification and innovations. Contrary to its predecessors, the car featured integrated, unitary bodywork – the largest in the UK at the time, as well as independent rear suspension, unheard for early 1960s British luxury cars. Combined with the 3.8-litre, triple carburettor engine as fitted to the E-type, it gave Jaguar's flagship a top speed of and capable handling at less than half the price of the contemporary Rolls-Royce Silver Cloud.
Despite press acclaim from both sides of the Atlantic, the Mark X never achieved its sales targets. When Jaguar decided to replace its entire saloon range with a single new model, the resulting XJ6 of 1968 used the Mark X as a template – albeit with a reduced size. Jaguar didn't build another car as large as the Mark X / 420G for the rest of the century, until the LWB version of the 2003–2009 Jaguar XJ.

Body

In 1961 the Mark X introduced a new upright, and slightly forward-leaning nose design for Jaguar saloons, with four headlamps set into rounded front fenders, and a vaned grill. This front-end style reappeared on many of the manufacturer's successive saloons, up to and including the X‑Type and third generation Jaguar XJ, both through 2009 — thereby forging Jaguar saloons' look for almost half a century.
Instead of relying on body-on-frame construction, like its predecessors and most of its competitors, the Mark X received a unitary body-shell, codenamed "Zenith" during its development. Its floorpan remained in production in elongated form, long after Mark X production ended, forming the basis of the Daimler DS420 Limousine until 1992. But at the same time, the interior was Jaguar's last to feature abundant standard woodwork, including the dashboard, escutcheons, window trim, a pair of large bookmatched fold out rear picnic tables, and a front seat pull-out picnic table stowed beneath the instrument cluster.
Later, air conditioning and a sound-proof glass division between the front and rear seats were added as options. The substantial doors required helical torsion springs inside the door pillars to enable them to be opened from the inside with an acceptably low level of effort.
From its introduction in mid-October 1961 until the arrival in 1992 of the low-slung XJ220, the Mark X stood as one of the widest production Jaguars ever built. Asked in 1972 if he thought the Mark X had grown rather too large, Jaguar chairman William Lyons, agreed that it "definitely" had: he opined that the then recently introduced and notably more compact Jaguar XJ6 was, by contrast an "ideal size".

Mechanical

The Mark X was the first Jaguar saloon to feature independent rear suspension designed by William Heynes Jaguar Technical Director and Chief Engineer. It differed from earlier large Jaguar saloons in having 14" wheels instead of the more common 15". It used a wider-track version of Jaguar's IRS unit first seen on the E Type, which was subsequently used on Jaguar vehicles until XJ-S production ended in 1996. The front suspension used double wishbones with coil springs and telescopic dampers.
Power initially came from the E-type's version of Jaguar's 3781 cc XK in-line six-cylinder engine designed by W Heynes, developing either or, depending on compression ratio. A 9:1 compression ratio was standard, but an alternative 8:1 compression ratio was available as an option. For the London Motor Show in October 1964 the enlarged 4,235 cc unit took over, although the 3.8-litre unit could still be specified until October 1965. Triple SU carburettors were fitted, fed from an AC Delco air filter mounted ahead of the right hand front wheel.
Transmission options were manual, manual with overdrive, or automatic. The arrival of the 4.2-litre power unit coincided with the introduction of a newly developed all-synchromesh four-speed gear box, replacing the venerable box inherited by the 3.8-litre Mark X from the Mark IX, which had featured synchromesh only on the top three ratios. Many domestic market cars and almost all cars destined for the important North American markets left the factory with a Borg Warner automatic gear-box. The 4.2-litre engine's introduction was also marked by a transmission upgrade for buyers of the automatic cars, who saw the Borg Warner transmission system switched from a DG to a Type 8 unit. The power train was completed by a Thornton Powr-Lok limited-slip differential.
Stopping power for this heavy car came from power-assisted four-wheel disc brakes, the rear units being mounted inboard alongside the differential.
Power-assisted steering was standard, the later 4.2 cars receiving Marles Varamatic Bendix variable ratio steering boxes, designed by an Australian, Arthur Bishop.

420G

For the London Motor Show in October 1966 the Mark X was renamed the Jaguar 420G. The 420G was distinct from the Mark X only with the addition of a vertical central bar splitting the grille in two, side indicator repeaters on the front wings, and a chrome strip along the wing and door panels.
Interior changes included perforations in the central sections of the leather seats, padded dashboard sections for safety, moving the clock to a central position, and the introduction of air conditioning as an option.
A limousine variant was available on the standard wheelbase; a fixed, one-piece seat back topped with a sliding glass partition replaced the separate chairs of standard cars.
Despite running for the same length of time as the Mark X the 420G sold in less than a third of the numbers. This lack of popularity and the increasing production of the smaller XJ6 resulted in the 420G being run out of production in 1970.

Eight seater

In 1968 British Leyland ended production of the Daimler limousine DR450 and the Vanden Plas Princess and chose to replace them by offering a extra-long wheelbase 420G with an eight-seater Hooper "Empress Line"-inspired body made by Vanden Plas. Aside from the shape of the rear part of the coachwork there was no link with Daimler cars made before Daimler became a subsidiary.
British Leyland's "Daimler DS420" was announced in June 1968. Taller than the 420G the new car was nearly nineteen feet long and six feet six inches wide with "majestic proportions". The rear compartment carried six people in comfort on the rear seats and three fold-away occasional seats. Sir William Lyons pointed out it was less than half the price of any of its competitors.
The 420G wheelbase was extended by 21", with the mechanical underpinnings of the car being subtly reconfigured. This eight-seater car was built until 1992 and used by many countries in official capacities. It was frequently used by funeral homes for carrying mourners or in modified form as a hearse.

In popular culture

A year after the Mark Ten's launch, popular toy car maker Corgi Toys released their #238 scale model of it, to great popularity. From 1962 to 1967, over 1.1 million were sold, and hardly any other Corgi model was released in as many colours.