J-class yacht


A J-Class yacht is a single-masted racing yacht built to the specifications of Nathanael Herreshoff's Universal Rule. The J-Class are considered the peak racers of the era when the Universal Rule determined eligibility in the America's Cup.

Universal Rule

The J-Class is one of several classes deriving from the Universal Rule for racing boats. The rule was established in 1903 and rates double-masted racers and single-masted racers. From 1914 to 1937, the rule was used to determine eligibility for the Americas Cup. In the late 1920s, the trend was towards smaller boats and so agreement among American yacht clubs led to rule changes such that after 1937 the International Rule would be used for 12-metre class boats.

Universal Rule formula

The Universal Rule formula is:
Where:
The numerator contains a yacht's speed-giving elements, length and sail area, while the retarding quantity of displacement is in the denominator. Also the result will be dimensionally correct; R will be a linear unit of length. J-Class boats will have a rating of between 65 and 76 feet. This is not the overall length of the boat but a limiting factor for the variables in the equation. Designers are free to change any of the variables such as length or displacement but must reduce the other variables to compensate.

J Class examples

A table of well-known J-Class yachts demonstrating that application of the Universal Rule could result in a rating between 65 and 76 feet.
.
LaunchNameBuilderLOALWLBeamDraughtDisplacementSail area
1930Shamrock V Camper and Nicholsons119 ft 1 in81 ft 1 in20 ft14 ft 9 in134 tons7,540 sq ft
1930Weetamoe Herreshoff Manufacturing Company125 ft 9 in83 ft20 ft14 ft 6 in7,550 sq ft
1930Yankee George Lawley & Son126 ft83 ft22 ft 6 in14 ft 6 in148 tons7,288 sq ft
1930Whirlwind George Lawley & Son139 ft86 ft21 ft 9 in15 ft 6 in158 tons7,335 sq ft
1930Enterprise Herreshoff Manufacturing Company120 ft 9 in80 ft23 ft14 ft 6 in128 tons7,583 sq ft
1933Velsheda Camper and Nicholsons127 ft 6 in83 ft21 ft 6 in15 ft
1934Endeavour Camper and Nicholsons129 ft 6 in83 ft 6 in22 ft14 ft 9 in143 tons7,651 sq ft
1934Rainbow Herreshoff Manufacturing Company127 ft 6 in82 ft21 ft15 ft141 tons7,535 sq ft
1936Endeavour II Camper and Nicholsons135 ft 6 in87 ft21 ft 6 in15 ft162 tons7,543 sq ft
1937Ranger Bath Iron Works135 ft87 ft21 ft15 ft166 tons7,546 sq ft

History and Evolution of the J Class

Prior to the adoption of the Universal Rule, the Seawanhaka Rule was used to govern the design of boats for inter club racing. As the Seawanhaka Rule used only two variables: Load Waterline Length and Sail Area, racing boats at the time were becoming more and more extreme. Larger and larger sails atop shorter and wider boats leading either to unwieldy, and ultimately unsafe, boats or craft that simply were not competitive. In order to account, in some ways, for the beam and the relationship of the length overall to the load waterline length the universal rule was proposed, taking into account displacement and length, which itself was a result of a formula taking into account such things as "quarter beam length". As different boats were designed and built, the notion of classes was derived to maintain groupings of competitive class.
Following Sir Thomas Lipton's near success in the 1920 America's Cup, he challenged again for the last time at age 79, in 1929. The challenge drew all the novelties developed in the previous decade on small boats to be ported onto large boats, and pitted British and American yacht design in a technological race. Between 1930 and 1937, the improvements brought to the design of sailboats were numerous and significant:
All these improvements may not have been possible without the context of the America's Cup and the stability offered by the Universal Rule. The competition was a bit unfair because the British challengers had to be constructed in the country of the Challenging Yacht Club, and had to sail on their own hull to the venue of the America's Cup : The design for such an undertaking required the challenging boat to be more seaworthy than the American boats, whose design was purely for speed in closed waters regattas. The yachts that remain in existence are all British, and probably log more nautical miles today than they ever did. This would not have been possible if Charles Ernest Nicholson did not obtain unlimited budgets to achieve the quality of build for these yachts.
Yacht designer Clinton Hoadley Crane noted in his memoirs that "America's Cup racing has never led to good sportsmanship. The attitude of the New York Yacht Club has been more that of a man in the forward position at war who has been ordered to hold his position at all costs –." In 1930, Thomas Lipton spent $1,000,000 for his Shamrock V challenge when America was facing a stock market crash, but the NYYC still built four cup defenders. The rivalry led both countries to put on a display of true technological innovations using the maximum load waterline length authorized by the rule for Endeavour II and Ranger in 1937.
Most J-Class yachts were scrapped prior to or during World War II because steel and lead had become precious to the war effort. In the post-war era, J-Class racing was deemed far too expensive, so no challenge for the America's Cup was placed until 1958 with the smaller third International Rule 12mR class.

Rigging problems

The original yachts carried masts, but they dismasted frequently. As a consequence, British yachtsman Sir Richard Fairey suggested an America's Cup challenge in the smaller K-Class. The New York Yacht Club refused the drop in size.
The J-Class rule was amended in 1937 to force rigs to weigh a minimum of 6,400 lb. The larger scantling would prevent the frequent dismastings that had been previously observed in the British Big Class season of 1935.

Revival

By the 1980s only three J-Class yachts were still in existence: Shamrock V, Endeavour and Velsheda, all designed by Charles Ernest Nicholson. Velsheda never served for an America's Cup challenge.
A revival of the J-Class was triggered by Elizabeth Meyer, who oversaw the refits of Endeavour and Shamrock V. For several decades Velsheda lay derelict in the mud of the Hamble river - she was refitted in 1984, too, and then more completely in 1997.
In August 2001, as part of the celebration of the 150th Jubilee of America's Cup celebration, the three existing J Class racers were brought to the Isle of Wight for a round the island race.
The creation of the J-Class Association in 2000 and the launch of a new replica of Ranger in 2004 accelerated the revival of the class. Several replicas and original designs were subsequently built and the association now organizes races for the J-Class in Newport, Falmouth and Cowes.
The current J Class fleet comprises nine boats: Endeavour, Hanuman, Lionheart, Rainbow, Ranger, Shamrock V, Velsheda, Topaz, and, launched in January 2017, Svea.
On March 12 2020, Svea and Topaz collided while maneuvering at the start line of the Superyacht Challenge Antigua. Both boats retired from racing with damage; two sailors were injured.

List of J-Class yachts

Ten yachts were built to the J-Class rule between 1930 and 1937, six in America and four in Great Britain.
Other boats raced in J-Class regattas: The yachts Katoura, Resolute and Vanitie served as trial horses and most International Rule 23mR yachts were converted to the J-Class, of which three remain in existence: Astra, Cambria and Candida.