Inertial electrostatic confinement


Inertial electrostatic confinement, or IEC, is a class of fusion power devices that use electric fields to confine the plasma rather than the more common approach using magnetic fields found in magnetic fusion energy designs. Most IEC devices directly accelerate their fuel to fusion conditions, thereby avoiding energy losses seen during the longer heating stages of MFE devices. In theory, this makes them more suitable for using alternative aneutronic fusion fuels, which offer a number of major practical benefits and makes IEC devices one of the more widely studied approaches to fusion.
As the negatively charged electrons and positively charged ions in the plasma move in different directions in an electric field, the field has to be arranged in some fashion so that the two particles remain close together. Most IEC designs achieve this by pulling the electrons or ions across a potential well, beyond which the potential drops and the particles continue to move due to their inertia. Fusion occurs in this lower-potential area when ions moving in different directions collide. As it is the motion provided by the field that creates the energy levels needed for fusion, not random collisions with the rest of the fuel, the bulk of the plasma does not have to be hot and the systems as a whole work at much lower temperatures and energy levels than MFE devices.
One of the simpler IEC devices is the fusor, which consists of two concentric metal wire spherical grids. When the grids are charged to a high voltage, the fuel gas ionizes. The field between the two then accelerates the fuel inward, and when it passes the inner grid the field drops and the ions continue inward towards the center. If they impact with another ion they may undergo fusion. If they do not, they travel out of the reaction area into the charged area again, where they are re-accelerated inward. Overall the physical process is similar to the colliding beam fusion, although beam devices are linear instead of spherical. Other IEC designs, like the polywell, differ largely in the arrangement of the fields used to create the potential well.
A number of detailed theoretical studies have pointed out that the IEC approach is subject to a number of energy loss mechanisms that are not present if the fuel is evenly heated, or "Maxwellian". These loss mechanisms appear to be greater than the rate of fusion in such devices, meaning they can never reach fusion breakeven and thus be used for power production. These mechanisms are more powerful when the atomic mass of the fuel increases, which suggests IEC also does not have any advantage with aneutronic fuels. Whether these critiques apply to specific IEC devices remains highly contentious.

Mechanism

For every volt that an ion is accelerated across, its kinetic energy gain correspond to increase of temperature of 11,604 kelvins. For example, a typical magnetic confinement fusion plasma is 15 keV, which corresponds to 170 megakelvin. An ion with a charge of one can reach this temperature by being accelerated across a 15,000 V drop. This sort of voltage is easily achieved in common electrical devices, a typical cathode ray tube operates at perhaps this range.
In fusors, the voltage drop is made with a wire cage. However high conduction losses occur in fusors because most ions fall into the cage before fusion can occur. This prevents current fusors from ever producing net power.

History

1930s

adapts Cockcroft and Walton's particle accelerator at the Cavendish Laboratory to create Tritium and Helium-3 by nuclear fusion.

1950s

Three researchers at LANL including Jim Tuck first explored the idea, theoretically, in a 1959 paper. The idea had been proposed by a colleague. The concept was to capture electrons inside a positive cage. The electrons would accelerate the ions to fusion conditions.
Other concepts were being developed which would later merge into the IEC field. These include the publication of the Lawson criterion by John D. Lawson in 1957 in England. This puts on minimum criteria on power plant designs which do fusion using hot Maxwellian plasma clouds. Also, work exploring how electrons behave inside the Biconic cusp, done by Harold Grad group at the Courant Institute in 1957. A biconic cusp is a device with two alike magnetic poles facing one another. Electrons and ions can be trapped between these.

1960s

In his work with vacuum tubes, Philo Farnsworth observed that electric charge would accumulate in regions of the tube. Today, this effect is known as the Multipactor effect. Farnsworth reasoned that if ions were concentrated high enough they could collide and fuse. In 1962, he filed a patent on a design using a positive inner cage to concentrate plasma, in order to achieve nuclear fusion. During this time, Robert L. Hirsch joined the Farnsworth Television labs and began work on what became the fusor. Hirsch patented the design in 1966 and published the design in 1967. The Hirsch machine was a 17.8 cm diameter machine with 150 kV voltage drop across it and used ion beams to help inject material.
Simultaneously, a key plasma physics text was published by Lyman Spitzer at Princeton in 1963. Spitzer took the ideal gas laws and adapted them to an ionized plasma, developing many of the fundamental equations used to model a plasma. Meanwhile, Magnetic mirror theory and direct energy conversion were developed by Richard F. Post's group at LLNL. A magnetic mirror or magnetic bottle, is similar to a biconic cusp except that the poles are reversed.

1980s

In 1980 Robert W. Bussard developed a cross between a fusor and magnetic mirror, the polywell. The idea was to confine a non-neutral plasma using magnetic fields. This would, in turn, attract ions. This idea had been published previously, notably by Oleg Lavrentiev in Russia. Bussard patented the design and received funding from Defense Threat Reduction Agency, DARPA and the US Navy to develop the idea.

1990s

Bussard and Nicholas Krall published theory and experimental results in the early nineties. In response, Todd Rider at MIT, under Lawrence Lidsky developed general models of the device. Rider argued that the device was fundamentally limited. That same year, 1995, William Nevins at LLNL published a criticism of the polywell. Nevins argued that the particles would build up angular momentum, causing the dense core to degrade.
In the mid-nineties, Bussard publications prompted the development of fusors at the University of Wisconsin–Madison and at the University of Illinois at Urbana–Champaign. Madison's machine was first built in 1995. George H. Miley's team at Illinois built a 25 cm fusor which has produced 107 neutrons using deuterium gas and discovered the "star mode" of fusor operation in 1994. The following year, the first "US-Japan Workshop on IEC Fusion", was conducted. This is now the premier conference for IEC researchers. At this time in Europe, an IEC device was developed as a commercial neutron source by Daimler-Chrysler Aerospace under the name FusionStar. In the late nineties, hobbyist Richard Hull began building amateur fusors in his home. In March 1999, he achieved a neutron rate of 105 neutrons per second. Hull and Paul Schatzkin, started fusor.net in 1998. Through this open forum, a community of amateur fusioneers have done nuclear fusion using homemade fusors.

2000s

Despite demonstration in 2000 of 7200 hours of operation without degradation at high input power as a sealed reaction chamber with automated control the FusionStar project was cancelled and the company NSD Ltd was founded. The spherical FusionStar technology was then further developed as a linear geometry system with improved efficiency and higher neutron output by NSD Ltd. which became GmbH in 2005.
In early 2000, Alex Klein, developed a cross between a polywell and ion beams. Using Gabor lensing Dr. Klein attempted to focus plasma into non-neutral clouds for fusion. He founded FP generation, which in April 2009, raised $3 million in financing from two venture funds. The company developed the MIX and Marble machine, but ran into technical challenges and closed.
In response to Riders' criticisms, researchers at LANL reasoned that a plasma oscillating could be at local thermodynamic equilibrium, this prompted the POPS and Penning trap machines. At this time, MIT researchers became interested in fusors for space propulsion and powering space vehicles. Specifically, researchers developed fusors with multiple inner cages. In 2005, Greg Piefer founded Phoenix Nuclear Labs to develop the fusor into a neutron source for the mass production of medical isotopes.
Robert Bussard began speaking openly about the Polywell in 2006. He attempted to generate interest in the research, before passing away from multiple myeloma in 2007. His company was able to raise over ten million in funding from the US Navy in 2008 and 2009.

2010s

Bussard's publications prompted the University of Sydney to start research into electron trapping in polywells in 2010. The group has explored theory, modeled devices, built devices, measured trapping and simulated trapping. These machines were all low power and cost and all had a small beta ratio. In 2010, Carl Greninger founded the north west nuclear consortium, an organization which teaches nuclear engineering principles to high school students, using a 60 kvolt fusor. In 2012, Mark Suppes received attention, in Brooklyn for a fusor. Suppes also measured electron trapping inside a polywell. In 2013, the first IEC textbook was published by George H. Miley.

Designs with cage

Fusor

The best known IEC device is the fusor. This device typically consists of two wire cages inside a vacuum chamber. These cages are referred to as grids. The inner cage is held at a negative voltage against the outer cage. A small amount of fusion fuel is introduced. The voltage between the grids causes the fuel to ionize. The positive ions fall down the voltage drop towards the negative inner cage. As they accelerate, the electric field does work on the ions, heating them to fusion conditions. If these ions collide, they can fuse. Fusors can also use ion guns rather than electric grids. Fusors are popular with amateurs, because they can be easy to construct, can regularly produce fusion and are a practical way to study nuclear physics. Fusors have also been used as a commercial neutron generator for industrial applications.
No fusor has come close to producing a significant amount of fusion power. They can be dangerous if proper care is not taken because they require high voltages and can produce harmful radiation. Often, ions collide with the cages or wall. This conducts energy away from the device limiting its performance. In addition, collisions heat the grids, which limits high power devices. Collisions also spray high-mass ions into the reaction chamber, pollute the plasma and cool the fuel.

POPS

In examining non-thermal plasma, workers at LANL realized that scattering was more likely than fusion. This was due to the coulomb scattering cross section being larger than the fusion cross section. In response they built POPS, a machine with a wire cage, where ions are moving at steady-state, or oscillating around. Such plasma can be at local thermodynamic equilibrium. The ion oscillation is predicted to maintain the equilibrium distribution of the ions at all times, which would eliminate any power loss due to Coulomb scattering, resulting in a net energy gain. Working off this design, researchers in Russia simulated the POPS design using Particle-in-cell code in 2009. This reactor concept becomes increasingly efficient as the size of the device shrinks. However, very high transparencies are required for successful operation of the POPS concept. To this end S. Krupakar Murali et al., suggested that carbon nanotubes can be used to construct the cathode grids. This is also the first application of carbon nanotubes directly in any fusion reactor.

Designs with fields

Several schemes attempt to combine Magnetic Confinement and electrostatic fields with IEC. The goal is to eliminate the inner wire cage of the fusor, and the resulting problems.

Polywell

The polywell uses a magnetic field to trap electrons. When electrons or ions move into a dense field, they can be reflected by the magnetic mirror effect. A polywell is designed to trap electrons in the center, with a dense magnetic field surrounding them. This is typically done using six electromagnets in a box. Each magnet is positioned so their poles face inward, creating a null point in the center. The electrons trapped in the center form a "virtual electrode" Ideally, this electron cloud accelerates ions to fusion conditions.

Penning trap

A Penning trap uses both an electric and a magnetic field to trap particles, a magnetic field to confine particles radially and a quadrupole electric field to confine the particles axially.
In a Penning trap fusion reactor, first the magnetic and electric fields are turned on. Then, electrons are emitted into the trap, caught and measured. The electrons form a virtual electrode similar to that in a polywell, described above. These electrons are intended to then attract ions, accelerating them to fusion conditions.
In the 1990s, researchers at LANL built a Penning trap to do fusion experiments. Their device was a small and low power machine.

Marble

MARBLE was a device which moved electrons and ions back and forth in a line. Particle beams were reflected using electrostatic optics. These optics made static voltage surfaces in free space. Such surfaces reflect only particles with a specific kinetic energy, while higher-energy particles can traverse these surfaces unimpeded, although not unaffected. Electron trapping and plasma behavior was measured by Langmuir probe. Marble kept ions on orbits that do not intersect grid wires—the latter also improves the space charge limitations by multiple nesting of ion beams at several energies. Researchers encountered problems with ion losses at the reflection points. Ions slowed down when turning, spending lots of time there, leading to high conduction losses.

MIX

The multipole ion-beam experiment accelerated ions and electrons into a negatively charged electromagnet. Ions were focused using Gabor lensing. Researcher had problems with a very thin ion turning region very close to a solid surface where ions could be conducted away.

Magnetically Insulated

Devices have been proposed where the negative cage is magnetically insulated from the incoming plasmas.

General criticism

In 1995, Todd Rider critiqued all fusion power schemes using plasma systems not at thermodynamic equilibrium. Rider assumed that plasma clouds at equilibrium had the following properties:
Rider argued that if such system was sufficiently heated, it could not be expected to produce net power, due to high x-ray losses.
Other fusion researchers such as Nicholas Krall, Robert W. Bussard, Norman Rostoker and Monkhorst disagreed with this assessment. They argue that the plasma conditions inside IEC machines are not quasineutral and have non-thermal energy distributions. Because the electron has a mass and diameter much smaller than the ion, the electron temperature can be several orders of magnitude different than the ions. This may allow the plasma to be optimized, whereby cold electrons would reduce radiation losses and hot ions would raise fusion rates.

Thermalization

The primary problem that Rider has raised is the thermalization of ions. Rider argued that, in a quasineutral plasma where all the positives and negatives are distributed equally, the ions will interact. As they do, they exchange energy, causing their energy to spread out heading to a bell curve of energy. Rider focused his arguments within the ion population and did not address electron-to-ion energy exchange or non-thermal plasmas.
This spreading of energy causes several problems. One problem is making more and more cold ions, which are too cold to fuse. This would lower output power. Another problem is higher energy ions which have so much energy that they can escape the machine. This lowers fusion rates while raising conduction losses, because as the ions leave, energy is carried away with them.

Radiation

Rider estimated that once the plasma is thermalized the radiation losses would outpace any amount of fusion energy generated. He focused on a specific type of radiation: x-ray radiation. A particle in a plasma will radiate light anytime it speeds up or slows down. This can be estimated using the Larmor formula. Rider estimated this for D-T, D-D, and D-He3, and that breakeven operation with any fuel except D-T is difficult.

Core focus

In 1995, Nevins argued that such machines would need to expend a great deal of energy maintaining ion focus in the center. The ions need to be focused so that they can find one another, collide and fuse. Over time the positive ions and negative electrons would naturally intermix because of Electrostatic attraction. This causes the focus to be lost. This is core degradation. Nevins argued mathematically, that the fusion gain is limited to 0.1 assuming that the device is fueled with a mixture of deuterium and tritium.
The core focus problem was also identified in fusors by Tim Thorson at the University of Wisconsin–Madison during his 1996 doctoral work. Charged ions would have some motion before they started accelerating in the center. This motion could be a twisting motion, where the ion had Angular momentum, or simply a tangential velocity. This initial motion causes the cloud in the center of the fusor to be unfocused.

Brillouin limit

In 1945, Columbia University professor Léon Brillouin, suggested that there was a limit to how many electrons one could pack into a given volume. This limit is commonly referred to as the Brillouin limit or Brillouin density, this is shown below.
Where B is the magnetic field, the permeability of free space, m the mass of confined particles, and c the speed of light. This may limit the charge density inside IEC devices.

Commercial applications

Since fusion reactions generates neutrons, the fusor has been developed into a family of compact sealed reaction chamber neutron generators for a wide range of applications that need moderate neutron output rates at a moderate price. Very high output neutron sources may be used to make products such as Molybdenum-99 and Nitrogen-13, medical isotopes used for PET scans.

Devices

Government and commercial