IAME Justicialista


The Institec Justicialista was a line of cars produced by the government of Argentina through its IAME from 1954 to 1955 as an early attempt to form an Argentine automotive industry. It used a front engine front wheel drive layout with a two-stroke two-cylinder engine derived from a German DKW design, and a conventional metal body. Due to the insistence of General Peron to have a sports car version made, a fiberglass two seat version was available as a coupe or roadster and featured a 1.5 liter air-cooled Porsche flat-four and a Porsche four-speed gearbox driving the front wheels. When General Peron was overthrown in 1955, the project was abandoned leading to the gradual disappearance of the Justicialista. It was later briefly revived as the short lived Wartburg powered Graciela. Overall, the line was sparingly produced and had few sales but was considered important because of its symbolic value to Argentina.

Pre-production

Through a decree dated 30 November 1949 and signed by the President of the Argentine Nation, Juan Domingo Perón, took charge of the factory processing of IAME Navy aircraft.
In 1953, Brigadier Juan Ignacio San Martin, head of the Aviation Industry and State Mechanical IAME, proposed to President Juan Domingo Perón automobile manufacturing. This metalworking facilities to take advantage of IAME.
In order to shorten development times, a rural DKW was imported and its technology was adapted. The original DKW two-cylinder engine had low power and was insufficient for the sedan. Then Magellan Raúl proposed a two-stroke engine but with a "V" type engine, the solution used in their Austrian factory Puch engines of 125 and 250 cc displacement.
Magellan's engine was completely original but with four cylinders, two combustion chambers and a displacement of 800 cc, it was called the M-800.
The bodywork was inspired by the 51 Chevrolet and the IAME aeronautical designers gave their particular image.
For sports cars, a brand-new technology was applied. Reinforced plastic fiber glass, to lower the weight. After several prototypes were developed, a hardtop version 2+2 was released, of which 167 units were manufactured before ending production.
Like other domestically produced cars, the Justicialista was made available to the middle and working class. Its production took place in the IAME's complex in the city of Cordoba. The assembly lines were manned by workers who had military in addition to technical training. The managers, themselves, employed military management approach, which rendered the factories as extensions of the barracks.

Models

Sport is also a closed constructed prototype of the series, and during the military coup was on display at the Paris Motor Show and never returned to the country.

End of Production

In the nearly two years of manufacture, 2300 cars were produced between the Chatito, the vans, and the sedans. It is difficult to identify the breakdown of this figure. However, there are sources that were able to determine the number of manufactured vehicles for some models. For example, it was found that the 1954 IAME Justicialista had a production run of 200 cars and they were built in 1954 until 1955.
The new leadership imposed by the de facto national government gave the assembly plant to the national car distributor Porsche and was renamed Teramo. The Justicialista was changed: the engine was put in the back, changing the tube to resemble the Porsche, and was named Puntero.

Technical

Engine