A hive frame or honey frame is a structural element in a beehive that holds the honeycomb or brood comb within the hive enclosure or box. The hive frame is a key part of the modern movable-comb hive. It can be removed in order to inspect the bees for disease or to extract the excess honey.
History
In 1814 Petro Prokopovych invented the world's first beehive which used hive frames. Early prototypes had a large distance between frames, and the frame lay on supporting strips of wood. As a result, the frames were cross-attached by burr comb and propolized to the supporting strips and were difficult to remove. In Prokopovych's design, the frames were placed only in the honey chamber. In the brood chamber, the bees built the combs in free style. Johann Dzierzon described the correct distance between combs in the brood chamber as 1½ inches from the center of one bar to the center of the next. In 1848, Dzierzon introduced grooves into the hive's side walls replacing the strips of wood to hang top bars. The grooves were 8 mm wide and met the distance requirements for a bee space. In May 1852, August von Berlepsch in Germany designed a movable frame. On October 5, 1852 in the United States, L. L. Langstroth patented a new hive with movable frames under US patent # US9300A. Today, the Langstroth hive is the most common design in many parts of the world. In the UKthe national hive is more commonly used. A smaller hive, the Smith hive is often used in Scotland, especially when bees are taken to the Heather moors. Historically the larger Dadant hive was used in most of Europe. All of these hives use movable frames of various numbers and sizes.
Specifications
A Langstroth hive is designed to hold eight or ten frames spaced center to center. The frames are made of wood or plastic. The top bar length is. The depth of the frame varies on the depth of the box:
Deep:
Medium:
Shallow:
The frame is made of:
1 top bar: It has two ears from which the frame hangs in the hive box. These are the only contact points with the box. These can have a groove on the bottom in which the wax foundation or strips fits or an edge on which the bees attach the wax.
2 side bars: It usually have three or four small holes used to attached the wax foundation.
1 bottom bar: It usually has a groove in which the wax foundation sits.
Frames can be outfitted with wax foundation, starter strips or left empty for bees to build the entire comb from scratch.
Other frames
Plastic frames: They are injected-moulded out of plastic and come in various colors. They usually come with built in plastic foundation molded as one piece with cells stamped to a specific size. The colors usually are used to distinguish types of frames within a manufacture's product line.
Queen rearing frames: Specialty frames such as cell bar frames are used to raise new queens. The queen cups are attached vertically to bars to encourage bees to build queen cells. Once these cells are capped, the beekeeper moves them each to a queenless colony for adoption.
Drone Trap frames: Some beekeepers have designed frames specifically to encourage bees to built drone brood in order cut it out as part of an Integrated Pest Management plan in the fight against Varroa destructor.
