High-speed rail in Poland


High-speed rail service commenced in Poland on 14 December 2014, with the introduction of 20 non-tilting Pendolino trainsets operating on 4 designated lines radiating out from Warsaw. Polish State Railways started passenger service trains PKP Pendolino operating a speed 200 km/h on 80 km line Olszamowice-Zawiercie. From December 2017 there are two 200 km/h sections, 136 km long in total. Polish state railways PKP launched the high-speed service under the Express Intercity Premium brand name.
PKP Intercity was initially using only nine sets a day to operate 23 EIP services from Warsaw to Gdynia, Kraków, Katowice, and Wrocław. Today most of the 20 units operate on the core Kraków – Warsaw – Gdańsk – Gdynia route, running hourly at peak times and every 2 h off-peak. The route from Warsaw to Gdańsk and Gdynia on the Baltic Sea. In 2011-2015 the Warsaw-Gdańsk-Gdynia route is undergoing a major upgrading costing $3 billion, partly funded by the European Investment Bank, including track replacement, realignment of curves and relocation of sections of track to allow speeds up to, modernization of stations, and installation of European Train Control System Level 2, which is to be completed in June 2015. When Pendolino services started on 14 December 2014 the previous Warsaw-Gdańsk rail travel time of 4½ to 6 hours was reduced to 2 hours 58 minutes by Pendolino, and will be reduced further to 2 hours 40 minutes when upgrading is completed.

Previous proposals

Historically, there have been many proposals and plans put in place by several Polish governments and/or interest groups seeking to introduce high-speed rail to Poland. As of December 2009, Poland had 700–800 km of railways suited for rail transport reaching 160 km/h. An additional 1,500 km are expected by 2015, including some sections allowing 200 km/h. While previously the Polish government had invested primarily in Poland's road network, from 2012 onwards it will shift its focus toward development of rail transport. The government hopes to link Poland's twelve largest cities by high-speed rail by 2020.
Several sections of the Central Trunk Line currently permit speeds of 200 km/h however only 160 km/h was used in commercial service. Polish Railways planned to buy Pendolino trains in 1998 but the contract was cancelled in the following year by the Supreme Control Chamber due to financial losses by Polish Railways.

Warsaw to Poznań and Wrocław via Łódź

There are plans for a "Y" line that would have connected Warsaw–Łódź–Kalisz. The line would then have split into two branches to Wrocław and Poznań. The geometric layout of the line was planned to permit speeds of 360 km/h. Construction had been planned to begin around 2014 and finish in 2019. In April 2010, the tender for a feasibility study was awarded to a consortium led by Spanish company Ingenieria IDOM. The feasibility study was granted €80 million in subsidy from the European Union. The total cost of the line including construction and train sets was estimated at €6.9 billion and was planned to be partially financed by EU subsidies.
In the center of the city of Łódź the "Y" line would have traveled through a tunnel which would have linked two existing railway stations. One of them: Łódź Fabryczna would have been reconstructed as an underground station. However, the "Y" line project was cancelled in 2011 due to insufficient funding.
As for February 2017 the project is still a subject of public debate only. However the central hub of "Y" line is completed.

Upgraded lines

The Central Rail Line Warsaw - Kraków/Katowice was originally built to geometry appropriate for speeds up to 250 km/h, and only requires suitable signalling equipment to be fitted and some amount of modernisation works. ETCS Level 1 allowed trains to reach 200 km/h in 2014 on part of the line and a further upgrade for 230 km/h is planned.
Reconstruction work has started on the Warsaw–Gdańsk line to allow speeds up to 200 km/h for tilting trains. This initially allows trains to run to ETCS Level 1 standards with a commitment but no timetable for further upgrades to ETCS Level 2 standards.

Rolling stock

The seven-car Class ED250 trainsets have been supplied by Alstom Transport. Each set has seats for 57 first class and 345 second class passengers, with a buffet/bar and three four-seat business or family compartments.
Polish state railways PKP originally ordered 14 Pendolinos in 1998, but the order was cancelled in 2000 due to a shortage of funds.
In 2010 Alstom won a PKP Intercity tender for high-speed trains with an offer of 20 New Pendolino trains. Similarly to the CRH5, these are non-tilting. Like the ČD class 680 the trains will be equipped to work on, and 3 kV DC, and thus able to operate in Poland, Germany, Austria and the Czech Republic.
On 30 May 2011 the Polish state railways PKP signed an agreement with Alstom for 20 Pendolinos ETR 610 for delivery in 2014. The first Pendolino was delivered on August 12, 2013. The Pendolinos were to operate on the high-speed CMK Central Rail Line from Kraków/Katowice to Warsaw, and on the routes from Gdynia to Warsaw and from Wrocław to Warsaw.
High-speed tests using the new Pendolino ED250 on the CMK Central Rail Line began in November 2013. On the first day of tests, November 16, the Pendolino reached. On 17 November 2013 a new speed record for Polish railways was set at km 184.000 of Polish Line No. 4 when Pendolino ED250 reached a speed of, breaking the 19-year record of. On 24 November 2013 the final day of tests on the CMK Central Rail Line the Pendolino reached.

Dispute between Alstom and Polish Railways PKP

The contract between the Polish operator PKP Intercity and Alstom called for the first eight Pendolino ED250 trainsets to be delivered on 6 May 2014, tested for operation at using European Train Control System Level 2 signalling. The tests had not been performed by May, and PKP announced that Alstom had failed to meet the contract terms and would be charged penalties as of May 6. Alstom responded that homologation in Poland at 250 km/h using ETCS Level 2 was impossible, since ETCS Level 2 was not operational anywhere in Poland, and the Central Rail Line where the first ED250 Pendolino had reached 293 km/h in testing was equipped with ETCS Level 1, not Level 2. On 26 June 2014 a compromise was reached between PKP and Alstom under which the Pendolinos would be delivered under a two-stage homologation, first homologated for operation using ETCS Level 1 and eventually to be homologated for ETCS Level 2. Pendolinos were put in service on 14 December 2014.

Operational status

Other loco-hauled services branded EIC will be switched to EIP operation over the coming months, with the eventual plan envisaging 17 Pendolinos in traffic, one spare and two for maintenance. All 20 trains have now been completed, with the final set being delivered to Poland at the beginning of December. However, the first unit which was used for testing and commissioning has been returned to Savigliano for retrofitting before entering revenue service.
As well as 3 kV DC for operation in Poland, the Pendolinos are equipped with 15 kV 16⅔ Hz and 25 kV 50 Hz and the train control systems needed to run in Germany, Austria and the Czech Republic. However, certification for international operation is not seen as a priority, as the trains are restricted to domestic services for an initial 10 years under the terms of a grant from the EU Cohesion Fund which covered 22% of the project cost.
Alstom expects to employ around 130 people at the Grochów maintenance depot, which has three covered tracks for servicing and two for maintenance. The company is using its TrainTracer health monitoring and diagnostics systems to manage the fleet, ensuring that sufficient trainsets are available for the operator. Some sets are stabled overnight at the outer termini, and cycled through the depot as required. The fleet management and pit-stop maintenance regime has been developed using experience in maintaining the Virgin West Coast Pendolino fleet in the UK, with many staff being trained in Manchester.