Hemicellulose


A hemicellulose is one of a number of heteropolymer, such as arabinoxylans, present along with cellulose in almost all terrestrial plant cell walls. While cellulose is crystalline, strong, and resistant to hydrolysis, hemicelluloses have random, amorphous structure with little strength. They are easily hydrolyzed by dilute acid or base as well as a myriad of hemicellulase enzymes.

Composition

Diverse kinds of hemicelluloses are known. Important examples include xylan, glucuronoxylan, arabinoxylan, glucomannan, and xyloglucan.
Hemicelluloses are polysaccharides often associated with cellulose, but cellulose and hemicellulose have distinct compositions and structures. Diverse sugars comprise hemicellulose, whereas cellulose is derived exclusively from glucose. For instance, besides glucose, sugar monomers in hemicelluloses can include the five-carbon sugars xylose and arabinose, the six-carbon sugars mannose and galactose, and the six-carbon deoxy sugar rhamnose. Hemicelluloses contain most of the D-pentose sugars, and occasionally small amounts of L-sugars as well. Xylose is in most cases the sugar monomer present in the largest amount, although in softwoods mannose can be the most abundant sugar. Not only regular sugars can be found in hemicellulose, but also their acidified form, for instance glucuronic acid and galacturonic acid can be present.

Structural comparison to cellulose

Unlike cellulose, hemicelluloses consist of shorter chains – 500–3,000 sugar units. In contrast, 7,000–15,000 glucose molecules comprise each polymer of cellulose. In addition, hemicellulose may be branched polymers, while cellulose is unbranched. Hemicelluloses are embedded in the cell walls of plants, sometimes in chains that form a 'ground' – they bind with pectin to cellulose to form a network of cross-linked fibres.
Based on the structural difference, like backbone linkages and side groups, as well as other factors, like abundance and distributions in plants, hemicellulose could be characterized into four groups as following: 1) Xylans, 2) Mannans; 3) Mixed linkage β-glucans; 4) Xyloglucans
Xylans
Xylans usually consist of backbone of β--linked xylose residues. And it could be further divided into homoxylans and heteroxylans. Homoxylans has a backbone of D-xylopyranose residues linked by β or mixed,β-glycosidic linkages. Homoxylans mainly carry structural functions. Heteroxylans such as glucuronoxylans, glucuronoarabinoxylans, and complex heteroxylans, have a backbone of D-xylopyranose and short carbohydrate branches. For examples, glucuronoxylan has substitution with α--linked glucuronosyl and 4-O-methyl glucuronosyl residues. And arabinoxylans and glucuronoarabinoxylans contain arabinose residues attached to the backbone

Mannans
The mannan-type hemicellulose can be classified into two types based on their main chain difference, galactomannans and glucomannans. Galactomannans have only β- linked D-mannopyranose residues in linear chains. Glucomannans consist of both β- linked D-mannopyranose and β- linked D-glucopyranose residues in the main chains. As for the side chains, D-galactopyranose residues tend to be 6-linked to both types as the single side chains with various amount.
Mixed linkage β-glucans
The conformation of the mixed linkage glucan chains usually contains blocks of β- D-Glucopyranose separated by single β- D-Glucopyranose. The population of β- and β- are about 70% and 30%. These glucans primarily consist of cellotriosly and cellotraosyl segments in random order. There are some study show the molar ratio of cellotriosly/cellotraosyl for oat, barley, and wheat.
Xyloglucans
Xyloglucans have a backbone similar to cellulose with α-D-Xylopyranose residues at position 6. To better describe different side chains, a single letter code notation is used for each side chain type. G -- unbranched Glc residue; X -- α-d-Xyl--Glc. L -- β-Gal, S -- α-l-Araf, F-- α-l-Fuc. These are the most common side chains.
The two most common types of xyloglucans in plant cell walls are identified as XXXG and XXGG.

Biosynthesis

Hemicelluloses are synthesised from sugar nucleotides in the cell's Golgi apparatus. Two models explain their synthesis: 1) a '2 component model' where modification occurs at two transmembrane proteins, and 2) a '1 component model' where modification occurs only at one transmembrane protein. After synthesis, hemicelluloses are transported to the plasma membrane via Golgi vesicles.
Each kind of hemicellulose is biosynthesized by specialized enzymes.
Mannan chain backbones are synthesized by cellulose synthase-like protein family A and possibly enzymes in cellulose synthase-like protein family D. Mannan synthase, a particular enzyme in CSLA, is responsible for the addition of mannose units to the backbone. The galactose side-chains of some mannans are added by galactomannan galactosyltransferase. Acetylation of mannans is mediated by a mannan O-acetyltransferase, however, this enzyme has not been definitively identified.
Xyloglucan backbone synthesis is mediated by cellulose synthase-like protein family C, particularly glucan synthase, which adds glucose units to the chain. Backbone synthesis of xyloglucan is also mediated in some way by xylosyltransferase, but this mechanism is separate to its transferase function and remains unclear. Xylosyltransferase in its transferase function is, however, utilized for the addition of xylose to the side-chain. Other enzymes utilized for side-chain synthesis of xyloglucan include galactosyltransferase, fucosyltransferase, and acetyltransferase.
Xylan backbone synthesis, unlike that of the other hemicelluloses, is not mediated by any cellulose synthase-like proteins. Instead, xylan synthase is responsible for backbone synthesis, facilitating the addition of xylose. Several genes for xylan synthases have been identified. Several other enzymes are utilized for the addition and modification of the side-chain units of xylan, including glucuronosyltransferase, xylosyltransferase, arabinosyltransferase, methyltransferase, and acetyltransferase.Given that mixed-linkage glucan is a non-branched homopolymer of glucose, there is no side-chain synthesis, only the addition of glucose to the backbone in two linkages, β1-3 and β1-4. Backbone synthesis is mediated by enzymes in cellulose synthase-like protein families F and H, specifically glucan synthase. Several forms of glucan synthase from CSLF and CSLH have been identified. All of them are responsible for addition of glucose to the backbone and all are capable of producing both β1-3 and β1-4 linkages, however, it is unknown how much each specific enzyme contributes to the distribution of β1-3 and β1-4 linkages.

Applications

In the sulphite pulp process the hemicellulose is largely hydrolysed by the acid pulping liquor ending up in the brown liquor where the fermentable hexose sugars can be used for producing ethanol. This process was primarily applied to calcium sulfite brown liquors.
Arabinogalactans can be used as emulsifiers, stabilizers and binders according to . Arabinogalactans can also be used as bonding agent for a bunch of things like sweeteners.
The films based on xylan show low oxygen permeability and thus are of potential interest as packaging for oxygen-sensitive products.
Agar is used in making jellies and puddings. It is also growth medium with other nutrients for microorganisms.
l colonies on an agar-based growth medium
Curdlan can be used in fat replacement to produce diet food while having a taste and a mouth feel of real fat containing products.
b-glucans have an important role in food supplement while b-glucans are also promising in health-related issues, especially in immune reactions and the treatment of cancer.
Xanthan, with other polysaccharides can form gels that have high solution viscosity which can be used in the oil industry to thicken drilling mud. In the food industry, xanthan is used in products such as dressings and sauces.
Alginate is an important role in the development of antimicrobial textiles due to its characteristics of environmental friendliness, and high industrialization level as a sustainable biopolymer.

Natural Functions

Hemicellulose in Plant Cells
There are many ways to obtain hemicellulose; all of these rely on extraction methods through hardwood or softwood trees milled into smaller samples. In hardwoods the main hemicellulose extract is glucuronoxlyan, while galactoglucomannan is found in softwoods. Prior to extraction the wood typically must be milled into wood chips of various sizes depending on the reactor used. Following this, a hot water extraction process, also known as autohydrolysis or hydrothermal treatment, is utilized with the addition of acids and bases to vastly change the yield size and properties. The main advantage to hot water extraction is that it offers a method where the only chemical that is needed is water, making this environmentally friendly and cheap.
The hot water treatment goal is achieve as much removal of hemilleculose from the wood as possible. This is done through the hydrolysis of the hemicellulose to achieve smaller oligomers and monosacccharie xylose. Xylose when dehydrated becomes furfural. When xylose and fufural are the goal, acid catalysts, such as formic acid, are added to increase the transition of polysaccharide to monosaccharide. This catalyst also has been show to also utilize a solvent effect to be aid the reaction.
One method of pretreatment is to soak the wood with diluted acids. This converts the hydroloze hemicellulose into monosaccharaides. When pretreatment is done with bases this destroys the structure of the inherent lignin. This changes the structure from crystalline to amorphous. Another pretreatment method is to pretreat hydrothermally. This offers advantages such as no toxic or corrosive solvents are needed, nor are special reactors, and no extra costs to dispose of hazardous chemicals.
The hot water extraction process is done in batch reactors, semi-continuous reactors, or slurry continuous reactors. For batch and semi-continuous reactors wood samples can be used in conditions such as chips or pellets while a slurry reactor must have particles as small as 200 to 300 micrometers. While the particle size decreases the yield production decreases as well. This is due to the increase of cellulose.
The hot water process is operated at a temperature range of 160 to 240 degrees Celsius in order to maintain the liquid phrase. This is done above the normal boiling point of water to increase the solubilization of the hemicellulose and the depolymerization of polysaccharides. This process can take several minutes to several hours depending on the temperature and pH of the system. Higher temperatures paired with higher extraction times lead to higher yields. A maximum yield is obtained at a pH of 3.5. If below, the extraction yield exponentially decreases. In order to control pH sodium bicarbonates are generally added. The sodium biocarbonates inhibits the autodyolysis of acetyl groups as well as inhibiting glycosic bonds. Depending on the temperature and time the hemicellulose can be further converted into oligomers, monomers, and lignin.