Handley Page Type S


The Handley Page Type S, or HPS-1 was a prototype British carrier-based fighter developed for the United States Navy in the early 1920s. A low-wing monoplane, it was unsuccessful, only two being built and flown.

Development and design

In 1921 the United States Navy drew up a specification for a single-seat fighter aircraft capable of operating either as a landplane from its aircraft carriers or from the water as a seaplane, seeking designs from both American and European companies. The British aircraft manufacturer Handley Page, which had recently developed the leading edge slot, realised use of slots and flaps could allow a high-speed monoplane to fly at the low speeds needed for carrier operations with a much higher wing loading than a normal biplane, and decided to develop an aircraft to meet this requirement. The resulting design, given the Handley Page designation Type S was a small, low-wing cantilever monoplane, with full-span leading edge slots and full-span slotted flaps. The airframe was a plywood monocoque, with the fuselage capable of being broken into two sections for storage onboard ship. It had a tailwheel undercarriage that could be replaced by two floats. Although designed to use engines of up to 400 hp, the prototypes were fitted with a much less powerful surplus Bentley BR2 rotary engine.
The US Navy placed an order for three prototypes, designated HPS-1 in the contemporary US Navy designation system. The first prototype flew on 7 September 1923, but proved to have poor handling, with the rudder proving to be ineffective. The second prototype was built with its wings fitted with six degrees of dihedral, flying in February 1924. It had much improved handling, and showed good speed at low level. However, when undergoing full load trials for the US Navy at Martlesham Heath, it was wrecked when its undercarriage collapsed on landing, and the US Navy cancelled the contract, with the third prototype, intended to be a floatplane not completed.

Operators