Ground control station


A ground control station is a land- or sea-based control center that provides the facilities for human control of Unmanned Aerial Vehicles. It may also refer to a system for controlling rockets within or above the atmosphere, but this is discussed elsewhere.

GCS Hardware

GCS hardware refers to the complete set of ground-based hardware systems used to control the UAV. This typically includes the Human-Machine Interface, computer, telemetry, video capture card and aerials for the control, video and data links to the UAV.

Fixed Installation and Vehicle Mounted GCS

Larger military UAVs such as the General Atomics MQ-1 Predator feature what resembles a "virtual cockpit". The pilot or sensor operator sits in front of a number of screens showing the view from the UAV, a map screen and aircraft instrumentation. Control is through a conventional aircraft-style joystick and throttle, possibly with Hands on Throttle and Stick functionality.
In addition, the GCS consists of satellite or long-range communication links that are mounted on the roof or on a separate vehicle, container or building.

Portable GCS

Smaller UAVs can be operated with a traditional "twin-stick" style transmitter, as used for radio controlled model aircraft. Extending this setup with a laptop or tablet computer, data and video telemetry, and aerials, creates what is effectively a Ground Control Station.
A number of suppliers offer a combined system that consists of what looks like a modified transmitter combined with what is usually a touch screen. An internal computer running the GCS software sits behind the screen, along with the video and data links.
Larger GCS units are also available that typically fit inside flight cases. As with the smaller units, they feature an internal computer running the GCS software, along with video and data links. Large single or dual screens are also fitted that can be high-brightness or treated with an anti-glare coating to increase visibility in bright sunlight. They can either be placed on the ground, on a portable table, or feature integrated folding legs.
Some portable GCS units are in the HOTAS layout. This layout includes a 3-Axis Joystick to control yaw, pitch and roll of the UAV. A slide or t-bar fader can increase or decrease the airspeed of the UAV.

GCS Software

GCS software is typically run on a ground-based computer that is used for planning and flying a mission. It provides a map screen where the user can define waypoints for the flight, and see the progress of the mission. It also serves as a “virtual cockpit”, showing many of the same instruments as in manned aircraft.