Designed in 1975 and first flown in 1981, the Orion was one of the earliest kitbuilt aircraft to be constructed from composite materials. It is a low wingcantilevermonoplane with a T-tail, of conventional layout except for its pusher configuration; this places the cabin well ahead of the leading edge and provides an excellent downward view. The Orion is built from Kevlar reinforced glassfibre shells, with foam filling in the wings. The latter, which have 4.5° of dihedral, are straight edged and only slightly tapered, with blunt tips. They carry electrically driven split flaps. Its cabin seats four in two side-by-side rows and is entered by centrally hinged gull wing doors. The engine, a Lycoming O-360 variant of either 180 hp or 200 hp is mounted over the wing trailing edge line and drives a three-bladed propeller, mounted at the extreme tail, via a long shaft. Behind the wing the fuselage tapers on its underside; it carries a broad fin with a straight, swept leading edge and rudder, on top of which is the straight, tapered tailplane and horn balancedelevators. Below the fuselage is a long, shallow ventralstrake. The tricycle undercarriage is electrically retractable. The main legs fold inwards; when deployed, they splay out strongly.
Operational history
The first prototype of the plan-built G-801 Orion flew for the first time on 2 June 1981, configured as a two-seater and powered by a 65 hp engine. The first kit-production aircraft, designated G-802 Orion, differed from the G-801 chiefly by having a wider cabin and a slightly longer fuselage. This first flew in November 1983, powered by a 180 hp Lycoming. By early 1985 140 plans for G-801s and 80 G-802 kits had been sold, but the development programme was halted by the death of its designer on 3 April 1985 whilst demonstrating the aircraft. Plans and kits were distributed by Aérodis in France and by Aerodis America Inc. in the USA. Individual builders, often using the original moulds at Brienne-le-Chateau, continued to innovate. Around 1990 Jaques Darcissac built an Orion with a fuselage strengthened with wire mesh and with a more robust undercarriage, which he named the Darcissac-Grinvalds DG-87 Goéland and this name has been used by three other builders. Other builders have also given their aircraft different names, such as Gerfaut, Gypaète and Scorpion. A new version of the Orion, tailored for US market was designed, known as the AA200. By the end of 2008 about 17 Orion variants had been flown, with another nine under construction. Most have been registered in France, though three are on the US register.
