Gallaudet Hydroplane


The Gallaudet Hydroplane is an early aircraft employing the use of wing-warping for roll control.

Development

The Gallaudet Hydroplane was built in Norwich, Connecticut by Edson Fessenden Gallaudet. The principle of wing-warping was independently applied to this kite/aircraft/glider several years before the Wright Brothers applied it to their Wright Flyer.. The Wrights later applied for a patent on wing-warping, which led to the widespread use of the aileron control method to avoid the Wright's airplane patents. Gallaudet generically employed the name hydroplane to many of his future seaplane designs. In 1908, Gallaudet would form the Gallaudet Engineering Company,. Later hydroplane models were built for the United States Navy.

Design

The 1897 Gallaudet Hydroplane glider featured twin floats, a central pyramidal support frame, and flexible wooden wing ribs with fabric-covering.
In 1913, Gallaudet filed U.S. Patent# 1,214,536 for the Hydroplane. The single-place open cockpit aircraft featured most of the engine enclosed in the fuselage. The fuselage tapered upwards to the rear with a small attached rudder. A single landing wheel protruded partially from the center of the fuselage for ground landings.

Operational history

The Gallaudet Hydroplane was on display at the East Hall of the Arts and Industries Building of the Smithsonian Museum.
Test flights for later hydroplanes built for U.S. Navy acceptance were performed at Gales Ferry, Connecticut in 1916.

Specifications (Hydroplane)