Fermi gas


An ideal Fermi gas is a state of matter which is an ensemble of many non-interacting fermions. Fermions are particles that obey Fermi–Dirac statistics, like electrons, protons, and neutrons, and, in general, particles with half-integer spin. These statistics determine the energy distribution of fermions in a Fermi gas in thermal equilibrium, and is characterized by their number density, temperature, and the set of available energy states. The model is named after the Italian physicist Enrico Fermi.
This physical model can be accurately applied to many systems with many fermions. Some key examples are the behaviour of charge carriers in a metal, nucleons in an atomic nucleus, neutrons in a neutron star, and electrons in a white dwarf.

Description

An ideal Fermi gas or free Fermi gas is a physical model assuming a collection of non-interacting fermions in a constant potential well. Fermions are elementary or composite particles with half-integer spin, thus follow Fermi-Dirac statistics. The equivalent model for integer spin particles is called the Bose gas. At low enough particle number density and high temperature, both the Fermi gas and the Bose gas behave like a classical ideal gas.
By the Pauli exclusion principle, no quantum state can be occupied by more than one fermion with an identical set of quantum numbers. Thus a non-interacting Fermi gas, unlike a Bose gas, concentrates a small number of particles per energy. Thus a Fermi gas is prohibited from condensing into a Bose–Einstein condensate, although weakly-interacting Fermi gases might form a Cooper pair and condensate. The total energy of the Fermi gas at absolute zero is larger than the sum of the single-particle ground states because the Pauli principle implies a sort of interaction or pressure that keeps fermions separated and moving. For this reason, the pressure of a Fermi gas is non-zero even at zero temperature, in contrast to that of a classical ideal gas. For example, this so-called degeneracy pressure stabilizes a neutron star or a white dwarf star against the inward pull of gravity, which would ostensibly collapse the star into a black hole. Only when a star is sufficiently massive to overcome the degeneracy pressure can it collapse into a singularity.
It is possible to define a Fermi temperature below which the gas can be considered degenerate. This temperature depends on the mass of the fermions and the density of energy states.
The main assumption of the free electron model to describe the delocalized electrons in a metal can be derived from the Fermi gas. Since interactions are neglected due to screening effect, the problem of treating the equilibrium properties and dynamics of an ideal Fermi gas reduces to the study of the behaviour of single independent particles. In these systems the Fermi temperature is generally many thousands of kelvins, so in human applications the electron gas can be considered degenerate. The maximum energy of the fermions at zero temperature is called the Fermi energy. The Fermi energy surface in reciprocal space is known as the Fermi surface.
The nearly free electron model adapts the Fermi gas model to consider the crystal structure of metals and semiconductors, where electrons in a crystal lattice are substituted by Bloch waves with a corresponding crystal momentum. As such, periodic systems are still relatively tractable and the model forms the starting point for more advanced theories that deal with interactions, e.g. using the perturbation theory.

1D uniform gas

The one-dimensional infinite square well of length L is a model for a one-dimensional box with the potential energy:
It is a standard model-system in quantum mechanics for which the solution for a single particle is well known. Since the potential inside the box is uniform, this model is referred to as 1D uniform gas, even though the actual number density profile of the gas can have nodes and anti-nodes when the total number of particles is small.
The levels are labelled by a single quantum number n and the energies are given by:
where is the zero-point energy, the mass of a single fermion, and is the reduced Planck constant.
For N fermions with spin-½ in the box, no more than two particles can have the same energy, i.e., two particles can have the energy of, two other particles can have energy and so forth. The two particles of the same energy have spin ½ or −½, leading to two states for each energy level. In the configuration for which the total energy is lowest, all the energy levels up to n = N/2 are occupied and all the higher levels are empty.
Defining the reference for the Fermi energy to be, the Fermi energy is therefore given by
where is the floor function evaluated at n = N/2.

Thermodynamic limit

In the thermodynamic limit, the total number of particles N are so large that the quantum number n may be treated as a continuous variable. In this case, the overall number density profile in the box is indeed uniform.
The number of quantum states in the range is:
Without loss of generality, the zero-point energy is chosen to be zero, with the following result:
Therefore, in the range:
the number of quantum states is:
Here, the degree of degeneracy is:
And the density of states is:
In modern literature, the above is often called the "density of states". However, differs from by a factor of the system's volume.
Based on the following formula:
the Fermi energy in the thermodynamic limit can be calculated to be:

3D uniform gas

The three-dimensional isotropic and non-relativistic uniform Fermi gas case is known as the Fermi sphere.
A three-dimensional infinite square well, has the potential energy
The states are now labelled by three quantum numbers nx, ny, and nz. The single particle energies are
where nx, ny, nz are positive integers. In this case, multiple states have the same energy, for example.

Thermodynamic limit

When the box contains N non-interacting fermions of spin ½, it is interesting to calculate the energy in the thermodynamic limit, where N is so large that the quantum numbers nx, ny, nz can be treated as continuous variables.
With the vector, each quantum state corresponds to a point in 'n-space' with energy
With denoting the square of the usual Euclidean length.
The number of states with energy less than EF + E0 is equal to the number of states that lie within a sphere of radius in the region of n-space where nx, ny, nz are positive. In the ground state this number equals the number of fermions in the system:
in reciprocal space. The surface of this sphere is the Fermi surface.
The factor of two expresses the two spin states, and the factor of 1/8 expresses the fraction of the sphere that lies in the region where all n are positive.
The Fermi energy is given by
Which results in a relationship between the Fermi energy and the number of particles per volume :
This is also the energy of the highest-energy particle, above the zero point energy. The th particle has an energy of
The total energy of a Fermi sphere of fermions is given by:
Therefore, the average energy per particle is given by:

Density of states

For the 3D uniform Fermi gas, with fermions of spin-½, the number of particles as a function of the energy is obtained by substituting the Fermi energy by a variable energy :
from which the density of states can be obtained. It can be calculated by differentiating the number of particles with respect to the energy:
This result provides an alternative way to calculate the total energy of a Fermi sphere of fermions :

Thermodynamic quantities

Degeneracy pressure

By using the first law of thermodynamics, this internal energy can be expressed as a pressure, that is
where this expression remains valid for temperatures much smaller than the Fermi temperature. This pressure is known as the degeneracy pressure. In this sense, systems composed of fermions are also referred as degenerate matter.
Standard stars avoid collapse by balancing thermal pressure against gravitational forces. At the end of the star lifetime, when thermal processes are weaker, some stars may become white dwarfs, which are only sustained against gravity by electron degeneracy pressure. Using the Fermi gas as a model, it is possible to calculate the Chandrasekhar limit, i.e. the maximum mass any star may acquire before collapsing into a black hole or a neutron star. The latter, is a star mainly composed of neutrons, where the collapse is also avoided by neutron degeneracy pressure.
For the case of metals, the electron degeneracy pressure contributes to the compressibility or bulk modulus of the material.

Chemical potential

Assuming that the concentration of fermions does not change with temperature, then the total chemical potential µ of the three-dimensional ideal Fermi gas is related to the zero temperature Fermi energy EF by a Sommerfeld expansion :
where T is the temperature.
Hence, the internal chemical potential, µ-E0, is approximately equal to the Fermi energy at temperatures that are much lower than the characteristic Fermi temperature TF. This characteristic temperature is on the order of 105 K for a metal, hence at room temperature, the Fermi energy and internal chemical potential are essentially equivalent.

Typical values

Metals

Under the free electron model, the electrons in a metal can be considered to form a uniform Fermi gas. The number density of conduction electrons in metals ranges between approximately 1028 and 1029 electrons per m3, which is also the typical density of atoms in ordinary solid matter. This number density produces a Fermi energy of the order:
where me is the electron rest mass. This Fermi energy corresponds to a Fermi temperature of the order of 106 kelvins, much higher than the temperature of the sun surface. Any metal will boil before reaching this temperature under atmospheric pressure. Thus for any practical purpose, a metal can be considered as a Fermi gas at zero temperature as a first approximation.

White dwarfs

Stars known as white dwarfs have mass comparable to our Sun, but have about a hundredth of its radius. The high densities mean that the electrons are no longer bound to single nuclei and instead form a degenerate electron gas. The number density of electrons in a white dwarf is of the order of 1036 electrons/m3. This means their Fermi energy is:

Nucleus

Another typical example is that of the particles in a nucleus of an atom. The radius of the nucleus is roughly:
The number density of nucleons in a nucleus is therefore:
This density must be divided by two, because the Fermi energy only applies to fermions of the same type. The presence of neutrons does not affect the Fermi energy of the protons in the nucleus, and vice versa.
The Fermi energy of a nucleus is approximately:
where mp is the proton mass.
The radius of the nucleus admits deviations around the value mentioned above, so a typical value for the Fermi energy is usually given as 38 MeV.

Arbitrary-dimensional uniform gas

Density of states

Using a volume integral on dimensions, the density of states is:
The Fermi energy is obtained by looking for the number density of particles:
To get:
where is the corresponding d-dimensional volume, is the dimension for the internal Hilbert space. For the case of spin-½, every energy is twice-degenerate, so in this case.
A particular result is obtained for, where the density of states becomes a constant :

Fermi gas in harmonic trap

The harmonic trap potential:
is a model system with many applications in modern physics. The density of states for a given spin species is:
where is the harmonic oscillation frequency.
The Fermi energy for a given spin species is:

Related Fermi quantities

Related to the Fermi energy, a few useful quantities also occur often in modern literature.
The Fermi temperature is defined as, where is the Boltzmann constant. The Fermi temperature can be thought of as the temperature at which thermal effects are comparable to quantum effects associated with Fermi statistics. The Fermi temperature for a metal is a couple of orders of magnitude above room temperature. Other quantities defined in this context are Fermi momentum, and Fermi velocity, which are the momentum and group velocity, respectively, of a fermion at the Fermi surface. The Fermi momentum can also be described as, where is the radius of the Fermi sphere and is called the Fermi wave vector.
Note that these quantities are not well-defined in cases where the Fermi surface is non-spherical.

Treatment at finite temperature

Grand canonical ensemble

Most of the calculations above are exact at zero temperature, yet remain as good approximations for temperatures lower than the Fermi temperature. For other thermodynamics variables it is necessary to write a thermodynamic potential. For an ensemble of identical fermions, the best way to derive a potential is from the grand canonical ensemble with fixed temperature, volume and chemical potential µ. The reason is due to Pauli exclusion principle, as the occupation numbers of each quantum state are given by either 1 or 0, so the partition function can be written as
where, indexes the ensembles of all possible microstates that give the same total energy and number of particles, is the single particle energy of the state and, its occupancy. Thus the grand potential is written as
The same result can be obtained in the canonical and microcanonical ensemble, as the result of every ensemble must give the same value at thermodynamic limit. The grand canonical ensemble is recommended here as it avoids the use of combinatorics and factorials.
As explored in previous sections, in the macroscopic limit we may use a continuous approximation to convert this sum to an integral:
where is the total density of states.

Relation to Fermi-Dirac distribution

The grand potential is related to the number of particles at finite temperature in the following way
where the derivative is taken at fixed temperature and volume, and it appears
also known as the Fermi–Dirac distribution.
Similarly, the total internal energy is

Exact solution for power-law density-of-states

Many systems of interest have a total density of states with the power-law form:
for some values of,,. The results of preceding sections generalize to dimensions, giving a power law with:
For such a power-law density of states, the grand potential integral evaluates exactly to:
where is the complete Fermi–Dirac integral. From this grand potential and its derivatives, all thermodynamic quantities of interest can be recovered.

Extensions to the model

Relativistic Fermi gas

The article has only treated the case in which particles have a parabolic relation between energy and momentum, as is the case in non-relativistic mechanics. For particles with energies close to their respective rest mass, the equations of special relativity are applicable. Where single-particle energy is given by:
For this system, the Fermi energy is given by:
where the equality is only valid in the ultrarelativistic limit, and
The relativistic Fermi gas model is also used for the description of large white dwarfs which are close to the Chandresekhar limit. For the ultrarelativistic case, the degeneracy pressure is proportional to.

Fermi liquid

In 1956, Lev Landau developed the Fermi liquid theory, where he treated the case of a Fermi liquid, i.e., a system with repulsive, not necessarily small, interactions between fermions. The theory shows that the thermodynamic properties of an ideal Fermi gas and a Fermi liquid do not differ that much. It can be shown that the Fermi liquid is equivalent to a Fermi gas composed of collective excitations or quasiparticles, each with a different effective mass and magnetic moment.