Exploration Flight Test-1


Exploration Flight Test-1 or EFT-1 was the first test flight of the Orion Multi-Purpose Crew Vehicle. Without a crew, it was launched on December 5, 2014, at 12:05 UTC, by a Delta IV Heavy rocket from Space Launch Complex 37B at Cape Canaveral Air Force Station.
The mission was a four-hour, two-orbit test of the Orion crew module featuring a high apogee on the second orbit and concluding with a high-energy reentry at around. This mission design corresponds to the Apollo 4 mission of 1967, which validated the Apollo flight control system and heat shield at re-entry conditions planned for the return from lunar missions.
NASA heavily promoted the mission, collaborating with Sesame Street and its characters to educate children about the flight test and the Orion spacecraft.

Objectives

The flight was intended to test various Orion systems, including separation events, avionics, heat shielding, parachutes, and recovery operations prior to its planned future launch aboard the Space Launch System.

Vehicle assembly

EFT-1 Orion was built by Lockheed Martin. On June 22, 2012, the final welds of the EFT-1 Orion were completed at the Michoud Assembly Facility in New Orleans, Louisiana. It was then transported to Kennedy Space Center's Operations and Checkout Building, where the remainder of the spacecraft was completed.
The Delta IV rocket was put in a vertical position on October 1, 2014, and Orion was mated with the vehicle on November 11.

Flight

The four-and-a-half-hour flight took the Orion spacecraft on two orbits of Earth. Peak altitude was approximately. The high altitude allowed the spacecraft to reach reentry speeds of up to, which exposed the heat shield to temperatures up to around.
During the flight, the crew module, a structural representation of the service module, a partial launch abort system containing only the jettison motor, and Orion-to-stage adapter were evaluated. The spacecraft remained attached to the dummy service module on the Delta IV's upper stage until re-entry began and relied on internal batteries for power rather than photovoltaic arrays, which were not contained in the structural representation. Data gathered from the test flight were analyzed by the critical design review in April 2015.
TimeEvent
L-6:00:00Orion powered on, mobile service tower retracts. Fueling of Delta IV Heavy begins
0:00:00Launch window opens. EFT-1 launches.
0:01:23Max Q
0:01:23Reach Mach 1
0:03:56Booster separation
0:05:30First stage MECO
0:05:33First stage separation
0:05:49Second stage ignition No. 1
0:06:15Structural representation of service module fairing jettison
0:06:20Launch Abort System jettison
0:17:39SECO No. 1, Orion begins first orbit
1:55:26Orion completes first orbit, second stage ignition No. 2
2:00:09SECO No. 2
2:05:00Enter first high radiation period
2:20:00Leave first high radiation period
2:40:00Reaction control system activation
3:05:00Reach peak altitude
3:23:41Orion separates from service module and second stage, second stage performs disposal burn
3:57:00Orion positions for reentry
4:13:41Entry interface
4:20:22Forward bay cover jettisons, parachute deployment begins
4:24:46Splashdown and recovery by the USS Anchorage crew

After splashdown in the Pacific Ocean, crews from the USS Anchorage recovered the EFT-1 Orion crew vehicle. Plans were later made to outfit the capsule for an ascent abort test in 2017.

Launch attempts

Post-flight disposition of capsule

Gallery