After Gibson acquired Epiphone in 1957, Gibson installed an Epiphone production line for archtop instruments in its own factory in Kalamazoo, Michigan, using the stock that Gibson acquired in the takeover, with some models taken directly from Gibson, other models specifically designed for Epiphone or already produced by Epiphone. In 1959, the Epiphone Rivoli debuted as a sibling to the then one-year-old Gibson EB-2.
Design
Made on the same production line as the EB-2, the Rivoli closely followed the production of the Gibson model; they shared the same body, neck and hardware. Only certain aesthetic aspectsdiffered, such as the headstock and a tortoise-shell plastic pick guard on some examples instead of the black plastic used on the EB-2. The Rivoli featured an ES-335-style semi-hollow body, made from laminated maple, a short 30.5-inch scale mahogany neck and one large "Sidewinder" humbucking pickup in the neck position. The electronics consisted of a single volume and tone knob, and a "choke-switch", which enhanced or cut the bass frequencies. When Gibson decided to move Epiphone production to Japan in 1970, production ended for the Rivoli. Its successor, the Epiphone 5120/EA-260, shared very few similarities to the original Rivoli, and had a bolt-on, full-scale maple neck, other hardware and a redesigned body.
Models and variations
The original run from 1959 to 1970, with a hiatus in 1962-63, featured one model, the single-pickup variant, which remained structurally unchanged from start to finish. Only the hardware changed – from a single-coil pickup to a humbucker, from banjo tuners to standard Kluson tuners in 1961, and from a bar bridge to a two-point bridge with individual saddles in 1968. Custom finish options different from the stock cherry, sunburst or natural, as well as a second pickup, were available on custom orders. The Epiphone Rivoli ReIssue guitars, made in Korea and Japan in the 1990s, were only visually identical. The neck was made from maple instead of mahogany, the pickup gave it a different sound, and the two-point bridge was replaced by the three-point bridge used by Gibson from the mid-1970s onward. Black became a factory option for the finish. The Epiphone Rivoli II was available as well, a Rivoli with two pickups, making it a sibling of the Gibson EB-2D.
