Dental radiography


Dental radiographs are commonly called X-rays. Dentists use radiographs for many reasons: to find hidden dental structures, malignant or benign masses, bone loss, and cavities.
A radiographic image is formed by a controlled burst of X-ray radiation which penetrates oral structures at different levels, depending on varying anatomical densities, before striking the film or sensor. Teeth appear lighter because less radiation penetrates them to reach the film. Dental caries, infections and other changes in the bone density, and the periodontal ligament, appear darker because X-rays readily penetrate these less dense structures. Dental restorations may appear lighter or darker, depending on the density of the material.
The dosage of X-ray radiation received by a dental patient is typically small, equivalent to a few days' worth of background environmental radiation exposure, or similar to the dose received during a cross-country airplane flight. Incidental exposure is further reduced by the use of a lead shield, lead apron, sometimes with a lead thyroid collar. Technician exposure is reduced by stepping out of the room, or behind adequate shielding material, when the X-ray source is activated.
Once photographic film has been exposed to X-ray radiation, it needs to be developed, traditionally using a process where the film is exposed to a series of chemicals in a dark room, as the films are sensitive to normal light. This can be a time-consuming process, and incorrect exposures or mistakes in the development process can necessitate retakes, exposing the patient to additional radiation. Digital X-rays, which replace the film with an electronic sensor, address some of these issues, and are becoming widely used in dentistry as the technology evolves. They may require less radiation and are processed much more quickly than conventional radiographic films, often instantly viewable on a computer. However digital sensors are extremely costly and have historically had poor resolution, though this is much improved in modern sensors.
had been exposed and most of the mesial half of the crown was either missing or poorly supported.
It is possible for both tooth decay and periodontal disease to be missed during a clinical exam, and radiographic evaluation of the dental and periodontal tissues is a critical segment of the comprehensive oral examination. The photographic montage at right depicts a situation in which extensive decay had been overlooked by a number of dentists prior to radiographic evaluation.

Regulations

There are numerous risks associated with the taking of dental radiographs, even though the dose to the patient is minimal, the collective dose needs to be considered in this context as well. Therefore, it is incumbent on the operator and prescriber to be aware of their responsibilities when it comes to exposing a patient to ionizing radiation. The United Kingdom has 2 sets of regulations related to the taking of x-rays. These are the Ionizing Radiations Regulations 2017 and IRMER 2018. IRR17 principally relates to the protection of workers and the public, along with the equipment standards. IRMER18 is specific for patient protection. These regulations replace the previous versions which were being followed for many years. This change has come primarily due to Basic Safety Standards Directive 2013, which all European Union member states are legally required to transpose into their national laws by 2018.
The above regulations are specific to the United Kingdom. Whereas the EU and USA are principally governed by the directive 2013/59/Eurotam and The Federal Guidance For Radiation Protection respectively. The goal of all these standards, including others governing other countries, is primarily to protect the patient, operators, maintain safe equipment and ensure quality assurance. The UK’s Health and Safety Executive has also published an accompanying Approved Code of Practice and associated guidance, which gives practical advise on how to comply with the law. Following the ACoP is not obligatory. However, compliance with it can prove very beneficial for the legal person if they were to face any negligence or lack of compliance to the law issues, as it will confirm that the said legal person has been implementing good practice.

Legal Responsibility and Staff Appointments

With IRR17 and IRMER18, there are certain key roles and responsibilities that need to be carried out by a designated person. One person may carry out more than one role. The person or body corporate with the legal responsibility in respect to every dental X-ray and every item of auxiliary equipment associated with radiation safety is known as The Legal Person.

1) Radiation Protection Supervisor

Their role is to ensure compliance with IRR17 and to supervise the arrangements set out in the practice’s Local Rules.

2) Referrer

IRMER18 defines a referrer as a registered medical, dental or other healthcare practitioner who is entitled according to the legal persons procedures to refer individuals for medical exposure to an IRMER practitioner. This would usually be the dentist in a dental practice.

3) Practitioner

IRMER18 defines a practitioner as a registered medical, dental or other healthcare practitioner who is entitled according to the legal person’s procedures to take responsibility for an individual medical exposure i.e responsible to provide the justification for the X-ray.

4) Operator

IRMER18 defines an operator as a registered medical, dental or other healthcare practitioner who is entitled according to the legal person’s procedures to carry out the practical aspects associated with radiographic examination, from patient identification, the X-ray process, to clinical evaluation of the radiographs. It is possible and appropriate for one person to carry out the roles of a referrer, practitioner and operator.
External appointments are also a legal obligation to comply with the regulations, these are the Radiation Protection Advisor and Medical Physics Expert.
Under IRR17, training of staff is paramount to complying with the regulation. It is the Legal Person’s duty to ensure this standard is met. This training includes but is not limited to:
Justification for the exposure of X-rays to a patient is extremely important to be documented under the regulations. The IRMER practitioner is responsible for justifying the X-ray. The benefit to the patient from the diagnostic information obtained should outweigh the detriment for of the exposure. The information gathered should aid in the patients' treatment planning, prognosis or management. For an exposure to be justified, the practitioner must consider the following:
A common acronym used in this situation is ALARP. This stands for As Low As Reasonably Possible, in reference to the dose delivered to the patient. This responsibility falls on the operator, and he is guided by the written protocols that are in place for every type of standard projection for each X-ray, including the exposure settings.

Quality assurance

It is the Legal Person’s responsibility to ensure quality assurance guidelines are followed in the dental practice. Its primary purpose is to ensure consistent adequate diagnostic information, keeping in mind the ALARP protocol. The essential procedures within a dental programme suited to dental radiology will relate to:
The subsequent image quality then needs to be assessed for its diagnostic acceptability. It is now becoming extremely important for each dental X-ray to be graded in the following way:

Grade 1

The minimum target a practice should aim for in regards to their total X-rays taken:
Placing the radiographic film or sensor inside the mouth produces an intraoral radiographic view.

Periapical view

Periapical radiographs are taken to evaluate the periapical area of the tooth and surrounding bone
For periapical radiographs, the film or digital receptor should be placed parallel vertically to the full length of the teeth being imaged.
The main indications for periapical radiography are
Intraoral periapical radiographs are widely used for the preoperative due to its simple technique, low cost and less radiation exposure and widely available in clinical settings.

Bitewing view

The bitewing view is taken to visualize the crowns of the posterior teeth and the height of the alveolar bone in relation to the cementoenamel junctions, which are the demarcation lines on the teeth which separate tooth crown from tooth root. Routine bitewing radiographs are commonly used to examine for interdental caries and recurrent caries under existing restorations. When there is extensive bone loss, the films may be situated with their longer dimension in the vertical axis so as to better visualize their levels in relation to the teeth. Because bitewing views are taken from a more or less perpendicular angle to the buccal surface of the teeth, they more accurately exhibit the bone levels than do periapical views. Bitewings of the anterior teeth are not routinely taken.
The name bitewing refers to a little tab of paper or plastic situated in the center of the X-ray film, which when bitten on, allows the film to hover so that it captures an even amount of maxillary and mandibular information.

Occlusal view

The occlusal view reveals the skeletal or pathologic anatomy of either the floor of the mouth or the palate. The occlusal film, which is about three to four times the size of the film used to take a periapical or bitewing, is inserted into the mouth so as to entirely separate the maxillary and mandibular teeth, and the film is exposed either from under the chin or angled down from the top of the nose. Sometimes, it is placed in the inside of the cheek to confirm the presence of a sialolith in Stenson's duct, which carries saliva from the parotid gland. The occlusal view is not included in the standard full mouth series.
1. Anterior oblique occlusal mandible – 45°
Technique: the collimator is positioned in the midline, thru the chin aiming an angle of 45° to the image receptor which is placed centrally into the mouth, on to the occlusal surface of the lower arch.
Indications:
1) Periapical status of lower incisor teeth for patients who cannot tolerate periapical radiographs.
2) Assess the size of lesions such as cyst or tumours at anterior area of mandible
2. Lateral oblique occlusal mandible – 45°
Technique: The collimator is positioned from below and behind the angle of mandible and parallel to the lingual surface of the mandible, aiming upwards and forwards at the image receptors which is placed centrally into the mouth, on to the occlusal surface of lower arch. Patients must turn their head away from the side of investigation.
Indications:
1) Detection of any sialoliths in submandibular salivary glands
2) Used to demonstrate unerupted lower 8’s
3) Assess the size of lesions such as cyst or tumours in the posterior of body and angle of mandible

Full mouth series

A full mouth series is a complete set of intraoral X-rays taken of a patients' teeth and adjacent hard tissue. This is often abbreviated as either FMS or FMX. The full mouth series is composed of 18 films, taken the same day:
The Faculty of General Dental Practice of the Royal College of Surgeons of England publication Selection Criteria in Dental Radiography holds that given current evidence full mouth series are to be discouraged due to the large numbers of radiographs involved, many of which will not be necessary for the patient's treatment. An alternative approach using bitewing screening with selected periapical views is suggested as a method of minimising radiation dose to the patient while maximizing diagnostic yield. Contrary to advice that emphasises only conducting radiographs when in the patient's interest, recent evidence suggests that they are used more frequently when dentists are paid under fee-for-service

Intra-oral radiographic techniques

Accurate positioning is of utmost importance to produce diagnostic radiographs and to avoid retakes, hence minimizing the radiation exposure of the patient. The requirements for ideal positioning include:
However, the anatomy of the oral cavity makes it challenging to satisfy the ideal positioning requirements. Two different techniques have hence been developed to be utilised in the undertaking of an intra-oral radiograph – Paralleling technique and Bisected angle technique. It is generally accepted that the paralleling technique offers more advantages than disadvantages, and gives a more reflective image, as compared to the bisecting angle technique.

Paralleling Technique

This can be used for both periapical and bitewing radiographs. The image receptor is placed in a holder and positioned parallel to the long axis of the tooth being imaged. The X-ray tube head is aimed at right angles, both vertically and horizontally, to both the tooth and the image receptor.
This technique is advantageous as the teeth are viewed exactly parallel with the central ray and therefore there are minimal levels of object distortion. With the use of this technique, the positioning can be duplicated with the use of film holders. This makes the recreation of the image possible, which allows for future comparison. There is some evidence that the use of the paralleling technique reduces the radiation hazard to the thyroid gland, as compared to the use of the bisecting angle technique.

Bisecting Angle Technique

The bisecting angle technique is an older method for periapical radiography. It can be a useful alternative technique when the ideal receptor placement using the paralleling technique cannot be achieved, for reasons such as anatomical obstacles e.g. tori, shallow palate, shallow floor of mouth, or narrow arch width.
This technique is based on the principle of aiming the central ray of the X-ray beam at 900 to an imaginary line which bisects the angle formed by the long axis of the tooth and the plane of the receptor. The image receptor is placed as close as possible to the tooth under investigation, without bending the packet. Applying the geometrical principle of similar triangles, the length of the tooth on the image will be the same as that of the actual length of the tooth in the mouth.
The many inherent variables can inevitably result in image distortion and reproducible views are not possible with this technique. An incorrect vertical tube head angulation will result in foreshortening or elongation of the image, while an incorrect horizontal tube head angulation will cause overlapping of the crowns and roots of teeth.
Many frequent errors that arise from the bisecting angle technique include: improper film positioning, incorrect vertical angulation, cone-cutting, and incorrect horizontal angulation.

Extraoral radiographic views

Placing the photographic film or sensor outside the mouth, on the opposite side of the head from the X-ray source, produces an extra-oral radiographic view.
A lateral cephalogram is used to evaluate dentofacial proportions and clarify the anatomic basis for a malocclusion, and an antero-posterior radiograph provides a face-forward view.

Lateral cephalometric radiography

Lateral cephalometric radiography is a standardized and reproducible form of skull radiography taken from the side of the face with precise positioning. It is used primarily in orthodontics and orthognathic surgery to assess the relationship of the teeth to the jaws, and the jaws to the rest of the facial skeleton. LCR is analyzed using cephalometric tracing or digitizing to obtain maximum clinical information.
Indications of LCR include-
Panoramic films are extraoral films, in which the film is exposed while outside the patient's mouth, and they were developed by the United States Army as a quick way to get an overall view of a soldier's oral health. Exposing eighteen films per soldier was very time consuming, and it was felt that a single panoramic film could speed up the process of examining and assessing the dental health of the soldiers; as soldiers with toothache were incapacitated from duty. It was later discovered that while panoramic films can prove very useful in detecting and localizing mandibular fractures and other pathologic entities of the mandible, they were not very good at assessing periodontal bone loss or tooth decay.

Computed tomography

There is increasing use of CT scans in dentistry, particularly to plan dental implants; there may be significant levels of radiation and potential risk. Specially designed CBCT scanners can be used instead, which produce adequate imaging with a stated tenfold reduction in radiation. Although computed tomography offers high quality images and accuracy, the radiation dose of the scans is higher than the other conventional radiography views, and its use should be justified. Controversy surrounds the degree of radiation reduction though as the highest quality cone beam scans use radiation doses not dissimilar to modern conventional CT scans.

Cone beam computed tomography

Cone beam computed tomography, also known as digital volume tomography, is a special type of X-ray technology that generates 3D images. In the recent years, CBCT has been developed specifically for its use in the dental and maxillofacial areas to overcome the limitations of 2D imaging such as buccolingual superimposition. It is becoming the imaging modality of choice in certain clinical scenarios although clinical research justifies its limited use.
Indications of CBCT, according to the SEDENTEXCT guidelines include
Developing dentition
Restoration of dentition
Surgical
The concept of parallax was first introduced by Clark in 1909. It is defined as “the apparent displacement or difference in apparent direction of an object as seen from two different points not on a straight line with the object”. It is used to overcome the limitations of the 2D image in the assessment of relationships of structures in a 3D object.
It is mostly used to ascertain the position of an unerupted tooth in relation to the erupted ones. Other indications for radiographic localization include: separating the multiple roots/canals of teeth in endodontics, assessing the displacement of fractures, or determining the expansion or destruction of bone.
With the rise in 3D radiographic techniques, the use of CBCT can be used to replace the undertaking of parallax radiographs, overcoming the limitations of the 2D radiographic technique. In cases of impacted teeth, the image obtained via CBCT can determine the buccal-palatal position and angulation of the impacted tooth, as well as the proximity of it to the roots of adjacent teeth and the degree of root resorption, if any.

Faults

Dental radiographs are an essential component to aid in diagnosis. Alongside an efficient clinical examination, a dental radiograph of a high quality can show essential diagnostic information crucial for the ongoing treatment planning for a patient. Of course when a dental radiograph is recorded many faults may arise. This is immensely variable due to differing use of: image receptor type, X-ray equipment, levels of training and processing materials etc.

General Faults

As previously stated a major difference in dental radiography is the versatile use of film vs digital radiography. This in itself leads to a long list of faults associated with each type of image receptor. Some typical film faults are discussed below with a variety of reasons as to why that fault has occurred.

Dark film

As film and digital are very different in how they work and how they are handled it is inevitable that their faults will also differ. Below is a list of some typical digital faults which may arise. It must be kept in mind that these also vary as per the type of digital image receptor which is used:
The potential faults associated with the choice of image receptor used have been covered, it should also be noted that other faults elsewhere in the process of formulating an ideal diagnostic radiograph can occur. The majority of these have already been mentioned due to other faults but due to processing inaccuracies alone these may occur:
The training of staff is also an area which can lead to faults in the formulation of an ideal diagnostic radiograph. If someone is not adequately trained this can lead to discrepancies in pretty much any aspect in the process of achieving a diagnostic radiographic image. Below are some examples:
It is inevitable that some faults may occur despite the efforts of prevention, so a set of criteria for what is an acceptable image has been created. This has to be implemented so that the amount of re-exposure to a patient is minimal in order to get a diagnostic image and to improve the manner in which radiographs are taken in practice.
When considering the quality of a radiographic image there are many factors which come into play. These can be split into sub-categories such as: Radiographic Technique, Type of image receptor and/or the processing of the image. A combination of all these factors are taken into account alongside the quality of the image itself to determine a specific grade for the image to determine if it is up to a standard for diagnostic use or not. The following grades are seen below:
These all have criteria to fill to fit into each grade. Due to a Grade 3 being diagnostically unacceptable all efforts must be put into place to minimise any faults and to maintain a high standard of Grade 1 and 2 films. In the “Radiographic Guidance Notes 2001” there are minimum and interim targets for each grade. For a Grade 1 the target is to be no less than 50% of radiographs taken annually but is realistically not less than 70%, Grade 2 target is to be no less than 40% but is ideally not greater than 20% whereas grade 3 target should be no greater than 10% which is realistically upheld.

Film Reject Analysis

To maintain a high standard of Grade 1 and 2 images each film needs to be examined to put the image into a specific category. In simplistic terms as depicted by the World Health Organisation, ‘this is a well designed quality assurance programme which should be comprehensive but inexpensive to operate and maintain.” The aim of the quality assurance is to continually achieve diagnostic radiographs of consistently high standards, therefore reducing the number of repeat radiographs by determining all sources of error to allow their correction. This, in turn, will then reduce the exposure to the patient keeping the doses as low as reasonably possible as well as keeping a low cost.
How quality assurance is carried out consists of close monitoring of image quality on a day to day basis, comparing each radiograph to one of a high standard. If a film does not reach this standard it goes through the process of film reject analysis. The X-ray equipment is also something to acknowledge and ensure that it is always compliant with the current regulations.
As stated above a grade 3 is diagnostically unacceptable and so cannot be used for further treatment of that patient. Instead of just disregarding these images there is a film reject analysis where all grade 3 films are collected and examined to determine the reason/s behind their unacceptable status.