The demagnetizing field, also called the stray field, is the magnetic field generated by the magnetization in a magnet. The total magnetic field in a region containing magnets is the sum of the demagnetizing fields of the magnets and the magnetic field due to any free currents or displacement currents. The term demagnetizing field reflects its tendency to act on the magnetization so as to reduce the total magnetic moment. It gives rise to shape anisotropy in ferromagnets with a single magnetic domain and to magnetic domains in larger ferromagnets. The demagnetizing field of an arbitrarily shaped object requires a numerical solution of Poisson's equation even for the simple case of uniform magnetization. For the special case of ellipsoids the demagnetization field is linearly related to the magnetization by a geometry dependent constant called the demagnetizing factor. Since the magnetization of a sample at a given location depends on the total magnetic field at that point, the demagnetization factor must be used in order to accurately determine how a magnetic material responds to a magnetic field.
The general solution of the first equation can be expressed as the gradient of a scalarpotential : Inside the magnetic body, the potential is determined by substituting and in : Outside the body, where the magnetization is zero, At the surface of the magnet, there are two continuity requirements:
The component of perpendicular to the surface must be continuous.
This leads to the following boundary conditions at the surface of the magnet: Here is the surface normal and is the derivative with respect to distance from the surface. The outer potential must also be regular at infinity: both and must be bounded as goes to infinity. This ensures that the magnetic energy is finite. Sufficiently far away, the magnetic field looks like the field of a magnetic dipole with the same moment as the finite body.
Uniqueness of the demagnetizing field
Any two potentials that satisfy equations, and, along with regularity at infinity, are identical. The demagnetizing field is the gradient of this potential.
Energy
The energy of the demagnetizing field is completely determined by an integral over the volume of the magnet: Suppose there are two magnets with magnetizations and. The energy of the first magnet in the demagnetizing field of the second is The reciprocity theorem states that
Formally, the solution of the equations for the potential is where is the variable to be integrated over the volume of the body in the first integral and the surface in the second, and is the gradient with respect to this variable. Qualitatively, the negative of the divergence of the magnetization is analogous to a bulk bound electric charge in the body while is analogous to a bound surface electric charge. Although the magnetic charges do not exist, it can be useful to think of them in this way. In particular, the arrangement of magnetization that reduces the magnetic energy can often be understood in terms of the pole-avoidance principle, which states that the magnetization tries to reduce the poles as much as possible.
Effect on magnetization
Single domain
One way to remove the magnetic poles inside a ferromagnet is to make the magnetization uniform. This occurs in single-domain ferromagnets. This still leaves the surface poles, so division into domains reduces the poles further. However, very small ferromagnets are kept uniformly magnetized by the exchange interaction. The concentration of poles depends on the direction of magnetization. If the magnetization is along the longest axis, the poles are spread across a smaller surface, so the energy is lower. This is a form of magnetic anisotropy called shape anisotropy.
Multiple domains
If the ferromagnet is large enough, its magnetization can divide into domains. It is then possible to have the magnetization parallel to the surface. Within each domain the magnetization is uniform, so there are no volume poles, but there are surface poles at the interfaces between domains. However, these poles vanish if the magnetic moments on each side of the domain wallmeet the wall at the same angle. Domains configured this way are called closure domains.
Demagnetizing factor
An arbitrarily shaped magnetic object has a total magnetic field that varies with location inside the object and can be quite difficult to calculate. This makes it very difficult to determine the magnetic properties of a material such as, for instance, how the magnetization of a material varies with the magnetic field. For a uniformly magnetized sphere in a uniform magnetic field the internal magnetic field is uniform: where is the magnetization of the sphere and is called the demagnetizing factor and equals for a sphere. This equation can be generalized to include ellipsoids having principal axes in x, y, and z directions such that each component has a relationship of the form: Other important examples are an infinite plate which has = in a direction normal to the plate and zero otherwise and an infinite cylinder which has = 0 along its axis and perpendicular to its axis. The demagnetizing factors are the principal values of the depolarization tensor, which gives both the internal and external values of the fields induced in ellipsoidal bodies by applied electric or magnetic fields.
