DLVO theory


The DLVO theory explains the aggregation of aqueous dispersions quantitatively and describes the force between charged surfaces interacting through a liquid medium.
It combines the effects of the van der Waals attraction and the electrostatic repulsion due to the so-called double layer of counterions.
The electrostatic part of the DLVO interaction is computed in the mean field approximation in the limit of low surface potentials - that is when the potential energy of an elementary charge on the surface is much smaller than the thermal energy scale,.
For two spheres of radius each having a charge
separated by a center-to-center distance in a fluid of dielectric constant containing a concentration of monovalent ions,
the electrostatic potential takes the form of a screened-Coulomb or Yukawa potential,
where is the Bjerrum length,
is the Debye–Hückel screening length,
which is given by, and
is the thermal energy scale at absolute temperature.

Overview

DLVO theory is a theory of colloidal dispersion stability in which zeta potential is used to explain that as two particles approach one another their ionic atmospheres begin to overlap and a repulsion force is developed. In this theory, two forces are considered to impact on colloidal stability: Van der Waals forces and electric double layer forces.
The total potential energy is described as the sum of the attraction potential and the repulsion potential. When two particles approach each other, electrostatic repulsion increases and the interference between their electrical double layers increases. Meanwhile, the Van der Waals attraction increases as they get closer. At each distance, the net potential energy of the smaller value is subtracted from the larger value.
The combination of these forces results in a deep attractive well, which is referred to as the primary minimum. At larger distances, the energy profile goes through a maximum, or energy barrier, and subsequently passes through a shallow minimum, which is referred to as the secondary minimum.
At the maximum of the energy barrier, repulsion is greater than attraction. Particles rebound after interparticle contact, and remain dispersed throughout the medium. The maximum energy needs to be greater than the thermal energy. Otherwise, particles will aggregate due to the attraction potential. The height of the barrier indicates how stable the system is. Since particles have to overcome this barrier in order to aggregate, two particles on a collision course must have sufficient kinetic energy due to their velocity and mass. If the barrier is cleared, then the net interaction is all attractive, and as a result the particles aggregate. This inner region is often referred to as an energy trap since the colloids can be considered to be trapped together by Van der Waals forces.
For a colloidal system, the thermodynamic equilibrium state may be reached when the particles are in deep primary minimum. At primary minimum, attractive forces overpower the repulsive forces at low molecular distances. Particles coagulate and this process is not reversible. However, when the maximum energy barrier is too high to overcome, the colloid particles may stay in the secondary minimum, where particles are held together weaker than the primary minimum. Particles form weak attractions but are easily redispersed. Thus, the adhesion at secondary minimum can be reversible.

History

In 1923, Debye and Hückel reported the first successful theory for the distribution of charges in ionic solutions.
The framework of linearized Debye–Hückel theory subsequently was applied to colloidal dispersions by Levine and Dube
who found that charged colloidal particles should experience a strong medium-range repulsion and a weaker long-range attraction.
This theory did not explain the observed instability of colloidal dispersions against irreversible aggregation in solutions of high ionic strength.
In 1941, Derjaguin and Landau introduced a theory for the stability of colloidal dispersions that invoked a fundamental instability driven by strong but short-ranged van der Waals attractions countered by the stabilizing influence of electrostatic repulsions.
Seven years later, Verwey and Overbeek independently arrived at the same result.
This so-called DLVO theory resolved the failure of the Levine–Dube theory to account for the dependence of colloidal dispersions' stability on the ionic strength of the electrolyte.

Derivation

DLVO theory is the combined effect of van der Waals and double layer force. For the derivation, different conditions must be taken into account and different equations can be obtained. But some useful assumptions can effectively simplify the process, which are suitable for ordinary conditions. The simplified way to derive it is to add the two parts together.

van der Waals attraction

van der Waals force is actually the total name of dipole-dipole force, dipole-induced dipole force and dispersion forces, in which dispersion forces are the most important part because they are always present.
Assume that the pair potential between two atoms or small molecules is purely attractive and of the form w = -C/rn, where C is a constant for interaction energy, decided by the molecule's property and n = 6 for van der Waals attraction. With another assumption of additivity, the net interaction energy between a molecule and planar surface made up of like molecules will be the sum of the interaction energy between the molecule and every molecule in the surface body. So the net interaction energy for a molecule at a distance D away from the surface will therefore be
where
Then the interaction energy of a large sphere of radius R and a flat surface can be calculated as
where
For convenience, Hamaker constant A is given as
and the equation will become
With a similar method and according to Derjaguin approximation, the van der Waals interaction energy between particles with different shapes can be calculated, such as energy between

Double layer force

A surface in a liquid may be charged by dissociation of surface groups or by adsorption of charged molecules such as polyelectrolyte from the surrounding solution. This results in the development of a wall surface potential which will attract counterions from the surrounding solution and repel co-ions. In equilibrium, the surface charge is balanced by oppositely charged counterions in solution. The region near the surface of enhanced
counterion concentration is called the electrical double layer. The EDL can be approximated by a sub-division into two regions. Ions in the region closest to the charged wall surface are strongly bound to the surface. This immobile layer is called the Stern or Helmholtz layer. The region adjacent to the Stern layer is called the diffuse layer and contains loosely associated ions that are comparatively mobile. The total electrical double layer due to the formation of the counterion layers results in electrostatic screening of the wall charge and minimizes the Gibbs free energy of EDL formation.
The thickness of the diffuse electric double layer is known as the Debye screening length. At a distance of two Debye screening lengths the electrical potential energy is reduced to 2 percent of the value at the surface wall.
with unit of m−1
where
The repulsive free energy per unit area between two planar surfaces is shown as
where
The interaction free energy between two spheres of radius R is
Combining the van der Waals interaction energy and the double layer interaction energy, the interaction between two particles or two surfaces in a liquid can be expressed as:
where WR is the repulsive interaction energy due to electric repulsion and WA is the attractive interaction energy due to van der Waals interaction.

Effect of shear flows

The DLVO theory of colloidal stability has been extended to take into account the effect of shear flow in fluid dynamic systems, which is relevant for many applications e.g. microfluidics, chemical reactors, atmospheric and environmental flows, in the work of Alessio Zaccone and collaborators.
In this extended DLVO theory for sheared systems, the DLVO energy barrier for aggregation gets reduced by a negative contribution which is proportional to the Péclet number of the particles, i.e. proportional to the shear rate, to the viscosity of the medium, and to the cube of the colloidal particle size, while the proportionality coefficient depends on the flow geometry. This result is obtained from an approximate solution to the governing Smoluchowski convection-diffusion equation obtained via the method of matched asymptotic expansions.
The theory explains a characteristic lag-time in the shear-induced aggregation of the particles, which decreases exponentially with the shear rate. It also explains the subsequent runaway regime of aggregation kinetics after the lag-time, as well as the characteristic bimodal cluster size distribution of aggregates found typically in shear-induced aggregating and self-assembling systems.
Furthermore, the theory has been verified across widely different flow conditions, in terms of different particles and microfluidic systems, and viscoelastic properties of the liquid phase.

Application

Since the 1940s, the DLVO theory has been used to explain phenomena found in colloidal science, adsorption and many other fields. Due to the more recent popularity of nanoparticle research, DLVO theory has become even more popular because it can be used to explain behavior of both material nanoparticles such as fullerene particles and microorganisms.

Shortcomings

Additional forces beyond the DLVO construct have been reported to also play a major role in determining colloid stability.
DLVO theory is not effective in describing ordering processes such as the evolution of colloidal crystals in dilute dispersions with low salt concentrations. It also can not explain the relation between the formation of colloidal crystals and salt concentrations.