The company, the Coventry Ordnance Works Limited, was formed in July 1905 by a consortium of British shipbuilding firms John Brown 50%, Cammell Laird 25% and Fairfield 25% with the encouragement of the British government, which wanted a third major arms consortium to compete with the duopoly of Vickers Sons & Maxim and Sir W G Armstrong Whitworth & Co to drive down prices. The new company bought from Cammell Laird the ordnance business established in the late 1890s by H H Mulliner and F Wigley which had been moved by them in 1902 from Birmingham to the 60 acre site in Coventry's Stoney Stanton Road. The ordnance business had been bought from Mulliner and Wigley by Charles Cammell, later Cammell Laird, in 1903.
Further expansion
By 1909 Coventry Ordnance Works had establishments, as well as at Coventry, at Scotstoun for manufacture of ordnance and gun equipment; for cordite shell loading and explosive magazines at Cliffe; and a gun-proving ground with a land range of 22,000 yards at Boston and was handling an order for 12 inch mountings of one of the new battleships. While to that time the works had been manufacturing the smaller sizes of Naval Guns and Mountings as well as Guns, Gun carriages, Ammunition and other military accessories, they had already extended their works since 1906 and had begun the manufacture of Guns and Turrets up to the largest sizes for both Battleships and Cruisers for the Admiralty. At Scotstoun a new factory had been built with a wet dock, pits and machinery for the erection and transhipping of the heaviest guns and mountings and hydraulic barbettes of the firm's own design but it was unused until 1911. A complete factory for the manufacture of Fuzes had also been installed in Coventry.
Admiralty
To this point Herbert Hall Mulliner had continued as managing director, but after a long series of altercations with the Admiralty he was asked to resign, compensated, and replaced 3 February 1910 by the 46-year-old rear-admiral R H S Bacon who had been the Admiralty's Director of Naval Ordnance since August 1907. By early February with admiral Bacon on board and Mulliner off it the directors could report an order from the British Admiralty for the mountings of all the heavy guns of one of the latest battleships that brought into operation for the first time the most costly and most important part of the company's new plant ending a long difficult period for Coventry Ordnance Works. Early in 1915 Bacon was appointed to the Royal Marines.
Their C.O.W. 37mm gun was the first modern autocannon developed in 1917.
Interwar
At their Annual General Meeting four days after the armistice Dick Kerr & Co Limited announced a provisional agreement for amalgamation with Coventry Ordnance Works Limited. Subsequently English Electric Company Limited was formed at the end of 1918 to own all the shares of Coventry Ordnance Works, Phoenix Dynamo Manufacturing Company and Dick Kerr & Co together with the United Electric Car Company and Willans & Robinson. It was anticipated that the new combine would be one of the three principal electrical manufacturing concerns in the country. It was intended that its business would be in large schemes such as the electrification of railways, the construction of large central power stations and the development of hydro-electric installations.
Coventry
It struggled in the recession after the end of World War I which affected Britain's arms industry and closed in 1925.
Scotstoun
, who took over the Scotstoun, Glasgow, works from Coventry Ordnance Works in 1920, converted it for diesel engine manufacture. Little investment was made and the firm had to seek civil engineering contracts away from shipbuilding in order to minimise losses. In 1927 the factory was put on a care and maintenance basis.
The beginning of a national rearmament programme in 1936 prompted the re-commissioning of the works to make gun mountings.
Postwar
After the war, they continued to build naval guns into the late 1960s, building the "standard" 4.5" turrets for the County class destroyers and other classes. Barrels were brought in from Vickers-Armstrongs but in earlier times they were made locally at Beardmores in Parkhead. Work was also switched to the manufacture of hydro-electric plant for the North of Scotland Hydro-Electric Board, Notable examples are the turbines for Cruachan power station and the Snowy Mountains scheme in Australia. and then to 'Danly' steel presses for the motor industry. these were supplied to British Pressed Steel at Linwood, Paisley, Longbridge, Dagenham and Liverpool. and gas engine driven compressors. In 1969 the works was sold to Albion Motors, whose main factory had been situated on the opposite side of South Street. This factory had some of the largest machine tools in the UK. One, a vertical boring mill had a turntable 36' in diameter, used for machining the gun turret gear rings. This and other machines lent themselves to the machining of large turbine casing castings for the hydro-electric schemes. The building had three tiers of overhead cranes and could together lift several hundred tons. The building still continues to manufacture automotive parts under the ownership of Albion, now a subsidiary of American Axle.
