Coventry Climax


Coventry Climax was a British forklift truck, fire pump, racing, and other speciality engine manufacturer.

History

Pre WW1

The company was started in 1903 as Lee Stroyer, but two years later, following the departure of Stroyer, it was relocated to Paynes Lane, Coventry, and renamed as Coventry-Simplex by H. Pelham Lee, a former Daimler employee, who saw a need for competition in the nascent piston engine market.
An early user was GWK, who produced over 1,000 light cars with Coventry-Simplex two-cylinder engines between 1911 and 1915. Just before World War I, a Coventry-Simplex engine was used by Lionel Martin to power the first Aston Martin car. Ernest Shackleton selected Coventry-Simplex to power the tractors that were to be used in his Imperial Trans-Antarctic Expedition of 1914.
Hundreds of Coventry-Simplex engines were manufactured during World War I to be used in generating sets for searchlights. In 1919, Pelham Lee acquired an existing company, Johnson & Smith Ltd, and changed its name to Coventry Climax Engines Ltd with premises at East Street, Coventry. .

Post WW1

Throughout the 1920s and 1930s, the company supplied engines to many companies manufacturing light cars such as Abbey, AJS, Albatross, Ashton-Evans, Bayliss-Thomas, Clyno, Crossley, Crouch, GWK, Marendaz, Morgan, Triumph, Swift, and Standard. In the early 1930s the company also supplied engines for buses, and in 1935 supplied the 'L' engine to David Brown tractors for the 550 Model A, being a collaborative venture with Ferguson. In the 1920s the company moved to Friars Road, Coventry and in the late 1930s they also acquired the former Riley premises on Widdrington Road, Coventry.
With the closure of Swift in 1931, the company was left with a stock of engines that were converted to drive electric generators, giving the company an entry into a new field. The economic problems of the 1930s hit the business hard and Leonard Pelham Lee, who had taken over from his father, diversified into the production of water-pumping equipment and the "Godiva" was born.
Going into the war, Coventry Climax used their marine diesel experience to further develop and build the Armstrong Whitworth supercharged H30 multifuel engine for military use. This has been fitted as an auxiliary engine in the British Chieftain and Challenger battle tanks and Rapier anti-aircraft missile systems.

Post WW2

In the late 1940s, the company shifted away from automobile engines and into other markets, including marine diesels, fire pumps, and forklift trucks. In 1946, the ET199 was announced, which the company claimed was the first British-produced forklift truck. The ET199 was designed to carry a load with a load centre, and with a lift height.
In 1950, Harry Mundy joined Coventry Climax, and a new lightweight all-aluminium overhead camshaft engine was developed in response to the government's ambitious requisition outline asking for a portable fire pump that was capable of pumping double the amount of water specified in the previous outline, with half the weight.
This was designated the FW, for "Feather Weight". The engine was displayed at the Motor Show in London and attracted attention from the motor racing fraternity for its very high "horsepower per pound of weight". With strong persuasions at the show including those by Cyril Kieft and a young Colin Chapman, Lee concluded that success in competition could lead to more customers for the company and so the team designed the FWA, a Feather Weight engine for Automobiles.
The first Coventry Climax racing engine appeared at the 1954 24 Hours of Le Mans in the front of one of two Kieft 1100 sports racers, but both cars failed to finish the race due to problems unrelated to the engines. The FWA became popular in sportscar racing and was followed by the Mark II and then by the FWB which had a capacity of nearly 1.5-litres. The new Formula Two regulations suited the 1.5-litre engine and it quickly became the engine to have in F2 racing. By 1957, the first Climax engines began to appear in Formula One in the back of Cooper chassis.
Initially, these were FWBs but the FPF engine followed. Stirling Moss scored the company's first Formula One victory, in Argentina in 1958, using a 2-litre version of the engine. In general terms, however, the engines were not powerful enough to compete with the 2.5-litre machinery and it was not until the 2.5-litre version of the FPF arrived in 1959 that Jack Brabham was able to win the world championship in a Cooper-Climax. At the same time, the company produced the FWE engine for Lotus Elite and this enjoyed considerable success in sports car racing, with a series of class wins at the Le Mans events in the early 1960s.
In 1961, there was a new 1.5-litre formula and the FPF engine was given a new lease on life, although the company began work on a V8 engine, designated the [|FWMV], and this became competitive in 1962 predominantly in Lotus, Cooper, Brabham and Lola chassis, with Jim Clark's Lotus outstandingly the most successful. There were a total of 22 Grand Prix victories before 1966 with crossplane, flatplane, two- and four-valve versions of the FWMV. When the new, 3-litre, formula was introduced, Coventry Climax decided not to build engines for the new formula and withdrew from racing after the unsuccessful FWMW project, with the exception of the new 2-Litre version of the FWMV.
Also in the early 1960s, Coventry Climax was approached by Rootes to mass-produce FWMAs for use in a compact family car project called Apex with an all-aluminium alloy over head cam engine combined with a full-syncromesh aluminium transaxle. This combination was considered very radical at the time, especially the syncromesh on all forward gears, which had been declared 'impossible' by Alec Issigonis of BMC Mini fame. The adoption to mass-production was successful, and the project came out to the market as the 875cc Hillman Imp totaling over 400,000 units made by 1976 including the later 998cc version.

Final years

At Earls Court in 1962 Coventry Climax' chairman Leonard Pelham Lee announced the withdrawal from building Formula 1 engines, stating that the company was losing money and not gaining enough publicity from their involvement. Nonetheless, Coventry Climax remained in Formula One until they were unable to come up with a new engine for the three-litre formula. The company was purchased by Jaguar Cars in 1963, which itself merged with the British Motor Corporation in 1966 to form British Motor Holdings.
In May, 1964, the Royal Automobile Club presented the Dewar Trophy, which is given at the recommendation of RAC's Technical and Engineering Committee for the most outstanding British achievement in the automotive field, to Leonard Pelham Lee. The citation reads: "Awarded to Coventry Climax Engines Ltd. for the design, development and production of engines which have brought British cars to the forefront in the field of Grand Prix racing."
The history of this trophy dates back to 1906. The last time the Dewar Trophy was awarded before 1964, the recipient was Alec Issigonis for British Motor Corporation in 1959 on the design and production of the ADO15 Mini, who once was a junior engineer at Coventry Climax.
BMH merged with the Leyland Motor Corporation in 1968 to form the British Leyland Motor Corporation, which was then nationalised in 1975 as British Leyland. Coventry Climax became part of the British Leyland Special Products Division, alongside Alvis, Aveling-Barford and others. At the end of 1978, BL brought together Coventry Climax Limited, Leyland Vehicles Limited, Alvis Limited and Self-Changing Gears Limited, into a new group called BL Commercial Vehicles under managing director David Abell.
In the early 1970s the fire pump business was sold back into private ownership, and the Godiva Fire Pumps company was formed in Warwick. In 1977 Coventry Climax acquired the Warrington forklift truck business of Rubery Owen Conveyancer, renaming it Climax Conveyancer.
In 1982 BL sold off the Coventry Climax forklift truck business back into private ownership, to Coventry Climax Holdings Limited. Sir Emmanuel Kaye, also chairman and a major shareholder of Lansing Bagnall at the time, formed the company, independent of his other interests for the purpose of acquiring Coventry Climax.
In 1986 Coventry Climax went into receivership and was acquired by Cronin Tubular. In 1990, a further change of ownership came with the engine business being sold to Horstman Defence Systems of Bath, Somerset, thus breaking the link with Coventry.
Kalmar Industries acquired the forklift truck interests of Coventry Climax in 1985. The company traded as "Kalmar Climax" for a few years, but is now trading as Kalmar Industries Ltd.

Engines

The 'Coventry Climax logo trade mark is the property of Canadian Peter Schömer, based out of Chichester, West Sussex near Goodwood.
Protected under Intellectual Property Office number UK00002527892.

Design

Within the complicated corporate lineage, the reputation of Coventry Climax as a top-rate engine designer-builder is largely credited to Walter Hassan and Harry Mundy, who designed and developed the FW together. The following design aspects are credited to these two people, except the last two items, in which Peter Windsor Smith played a considerable role in place of Mundy who left the firm in 1955 and returned in 1963.
At first, the OC was made with a capacity of 1122 cc as a straight-four using a bore of 63 mm and stroke of 90 mm with overhead inlet and side exhaust valves, producing. It was introduced in the early 1930s and also built under licence by Triumph.

MC

The OC engine had morphed into the MC engine by 1933. It looked virtually identical but there were internal differences. It was still 1122 cc, I.O.E. and four cylinders inline, but for example the camshaft was different as were the cam followers. The timing marks on the flywheel are now observered from the top of the engine rather than the underside. Carburation was variable, from the side draught Solex, via the down draught SU, to the progressive choke down draught and larger side draught SU system on Triumph engines. Water cooled by thermosyphon with no water pump or fan.

JM

A six-cylinder version of the MC engine, the JM, was made with a capacity of 1476 cc developing. The JMC version had its capacity increased to 1640 cc by increasing the bore to 63 mm and produced. It was different from the 4 cylinder
engine in the it had both a water pump and an oil filter, whereas the 4 cylinder engine relied on thermosyphon alone and no oil filter.

FW

The FW 38 hp 1020 cc straight-four SOHC was designed by Hassan and Mundy as the motive unit for a portable service firepump which was supplied to the government under three contracts totaling over 150,000 units. This engine was revolutionary in its lightness, with a bare weight of 180 pounds, combined with the maintenance-free valve adjustment using shims under an overhead camshaft.
In 1953 it was adapted for automotive racing as the 1098 cc FWA retaining the cast crank three main bearing construction of the FW but with a distributor ignition in place of a magneto, a different camshaft and a higher, 9.8:1 compression ratio. With a bore of 2.85 inches and a stroke of 2.625 inches it produced and was first used at Le Mans in 1954 by Kieft Cars. After the FWA was introduced, the FW was renamed to FWP.
The larger bore and longer stroke 1460 cc FWB engine followed, it retained the FWA head but had a forged steel crank and produced a nominal. The most significant of the series was the FWE which used the FWB bore size and the FWA stroke for a displacement of 1216 cc. In exchange for a 1,000 unit purchase agreement signed by Chapman, it was specifically designed with forged steel crank for the Lotus Elite but became a favourite with a number of sports car racing firms for its racing durability and high power-to-weight ratio.
Other FW variants included a short-stroke steel crank version of the FWA named the 744 cc FWC, as used by Dan Gurney early in his career in US club racing. The objective of this engine was for Lotus to campaign for the 750 cc Le Mans Index of Performance prize in 1957, three engines were made for this purpose and they won the prize. Lotus also campaigned the FWC at Le Mans in 1958.
The FWE powered Lotus Elites won their class six times and the Index of Thermal Efficiency once during the 24 Hours of Le Mans. The FW series engines in modified forms also powered Lotus Eleven cars which took three class wins at Le Mans and one Index of Performance win.
In 1966-67, Fisher-Pierce of America imported an 85 hp version of the FWB with twin-carburetors to be mounted vertically in their outboard marine unit. This boat engine came out to the market as Bearcat 85.

FPE (the 'Godiva')

announced in 1952 that 2.5L naturally aspirated engines would be a part of Formula One regulation starting 1954. Walter Hassan and especially Harry Mundy having their roots deeply in the racing field, started discussions and preliminary designs of a 2.5L 8 Cylinder GP engine in 1952 without a formal directive from the father and son Pelham Lees. Because this project was a pure racing engine from the beginning, which was in stark contrast to the corporate product history up to FWA, the engine was named FPE for Fire Pump Engine by the playful minds of Hassan and Mundy.
After the corporate blessing was given to the project with the name 'Godiva', this DOHC 90 degree steel crossplane crank V8 engine was built in 1954 for a F1 Kieft with the intention to use the fuel injection system made by Skinners Union.
However, this fuel injection system, being designed for aeroplane engines, was found not having the means to enrich the mixture for acceleration, which is not suitable for automobile use. FPE initially showed 240 bhp using Weber carburettors, but the press at the time reported the rumoured fuel-injected Mercedes 2.5L GP engine is quoted as producing more than 300 bhp, and a corporate decision was made not to release FPE to Kieft in light of the lack of proper fuel injection, leaving the Kieft F1 project, as well as other prospective users, HWM and Connaught, high and dry.
There were reports to the effect that the engine was not run because of fears about the rumoured power of other 2.5L GP engines, but shortly after, John Cooper brought a race-winning, works Maserati F1 engine he had on loan into Coventry Climax, where it produced 225 bhp running on the same dynamometer upon which the FPE had made 264 bhp after some development.
Ultimately, development on the engine was abandoned in favour of focusing on the FPF engine, which was already proven competitive in 1.5L form with side-draft Weber carburetors in the F2 races, and the entire stock of parts were sold to Andrew Getley in the mid-1960s. When the Formula One regulation changed to 3 Litres for 1966, Mr. Getley permitted Paul Emery to rebuild one FPE to 3 Litre format, and fit it to a one-off Shannon steel monocoque chassis to make the Shannon F1 car named SH1 driven by Trevor Taylor at 1966 British Grand Prix. Bored out to 3 Litres and Tecalemit Jackson fuel injection installed, this Emery-built FPE produced 312 bhp on the dynamometer at Chrysler's Kew facility.
Remnants of other FPE parts were much later found by the then-owner of 1954 Kieft F1 chassis, Gordon and Martyn Chapman, in an air-raid cellar in the abandoned building which used to belong to Bill Lacey near the main entrance of Silverstone Circuit, including 3 blocks, 2 cranks, 16 cylinder heads, 20-some cam covers, two cardboxes full of timing gears and camshafts, which all belonged to "Doc Murfield" who had purchased the parts from Andrew Getley in 1968-69 and had entrusted them to Bill Lacey.
These parts were assembled into two engines under the ownership of Gordon Chapman and then under Bill Morris, who bought the engine parts and the Kieft chassis after Gordon Chapman's death. One engine was sold by Chapman to the then-owner of Shannon SH1, and this FPE is said to be in Austria together with Shannon SH1. Another using two of the later type twin spark plug heads in the stock, was run in the original 1954 Kieft-Climax V8 Grand Prix chassis with downdraft Weber 40IDF carburetors when they were finally mated and the construction finished on 21 September 2002 at VSCC Silverstone Meeting, and this car was campaigned in VSCC events for the next 10 years.
Four sets of period-correct Weber 40DCNL carburetors were installed on the FPE during the 10 years, and the car, one spare chassis, and the FPE parts were sold in a lot at Bonhams Chichester auction on 15 September 2012 for £185,000.

FPF

The FPF was a double overhead cam all aluminium four cylinder that was essentially half of the above [|FPE V8] engine, which was designed as a pure racing engine from the outset. Designed in 1955 and becoming available in 1956, it had gear-driven camshafts, steel alloy cylinder sleeves and individual oil scavenge as well as pressure feed pumps for a dry sump system. Carburetion was by two twin-choke Weber DCO side-draft carburettors.
It started life as a 1,475 cc Formula Two engine by enlarging the 2.95" bore of the FPE to 3.2" with the slightly increased 2.8" stroke, and was gradually enlarged for use in Formula One. See the above [|Design section] for its unusual intake port design.
A 1,964 cc version took Stirling Moss and Maurice Trintignant to Cooper's first two Grand Prix victories against 2.5 L opposition in 1958. After the interim 2,207 cc version, a larger block was cast to result in 2,467 cc in 1958, and then to a full-sized 2,497 cc in 1960. Jack Brabham won the World Championship of Drivers in both 1959 and 1960 driving FPF powered Coopers.
The FPF with larger block was then adapted to the new 1.5-litre Formula One of 1961 as 1,499.8 cc FPF Mk.II and won three World Championship Grand Prix races in that year. In addition, capacity was increased to 2,751 cc for the Indianapolis 500 and this larger variant was also utilised for sports car racing, the Intercontinental Formula and Formula Libre racing. It also served as a stopgap in the new 3.0 L Formula One regulation, which went into effect for 1966. The old 2,497 cc FPF gained a new lease of life in 1964 with the introduction of the Tasman Formula and the Australian National Formula, both of which had a maximum engine capacity of 2.5 litres.
The following is the list of FPF versions:
See the below [|F1 engines section] for comparison to other models.

FWM

The FW was designed in response to the British Government's Defence Ministry requisition outline issued in 1950, specifying a water pump and petrol engine combination to deliver 350 gallons of water per minute at 100 psi, with 35 to 40 bhp at the weight of 350 pounds or less. The successful bid by a portable pump driven by the 38 bhp FW mounted in a steel pipe frame resulted in a 5000 unit supply contract in 1952.
By 1956, 1460 cc FWB was adapted back to a higher output fire pump engine as FWBP with good results, and led to the realisation that the newer 35 hp general purpose engine specification by the government could be met with a smaller displacement engine. This resulted in the development of SOHC 654 cc FWM in 1957, which basically was a smaller and lighter version of FWP with many detail differences that reflect the improvements and cost-cutting as well as weight saving measures found in the development of FWA, FWB and FWE. The differences include:
FWM was then developed into automotive engine as FWMA of 742 cc with larger 2.45" bore and 2.4" stroke in 1959. Several versions of FWMD diesel utility engines, including a marine version, followed, and then a chain-driven DOHC 2 valves per cylinder crossflow cylinder head was developed and became the FWMC, succeeding FWC as the all-out racing engine for the 750cc class. FWMC became known for the unusually loud and high-pitched exhaust note when installed in a specially made super-light version of Lotus Elite ran by UDT Laystall at 1961 Le Mans 24 Hours.
It was this 4 cylinder DOHC FWMC that was used as the basis to develop the successful FWMV V8.
However, coinciding with the promotion of Peter Windsor Smith as the Chief Engineer in 1960, Coventry Climax reverted to using the metric system for specifying piston and crankshaft sizes, so FWMV was born with 63 mm bore and 60 mm stroke, ending up having almost no parts interchangeability to FWMC despite having an extremely similar design
To streamline the production, the 63 mm × 60 mm sizes were later applied back to the 4 cylinder engine to form the 748 cc FWMB with the same cylinder head as the FWMA.

FWMV

The 1.5-litre FWMV V8, developed from FWMC using a crossplane crankshaft, was designed in 1960 and ran for the first time in May 1961. It produced from 11.5:1 compression ratio and made its debut on Cooper T58 at 1961 German GP in August. Initial developments resulted in at 8500rpm soon after, but Jack Brabham at Cooper and Stirling Moss at Rob Walker Racing Team suffered over-heating problems while enjoying a great amount of power for the rest of the season.
The problem was diagnosed to originate in the thermal expansion rate of the cylinder sleeve causing the Cooper Ring in between the block and the head to leak. With this problem solved in the Mk.II 186 bhp version, having a larger 1.35" intake valves, FWMV started to score GP victories, ending the 1962 season with 3 wins for Lotus, 1 win for Cooper, 5 second places and 4 third places, in addition to 7 pole positions and 6 fastest laps.
For 1963, Coventry Climax was able to convince Lucas to supply the cogged belt driven fuel injection system originally developed for BRM with then-unique sliding throttle plates with four round intake bores cut out. With the larger bore and shorter stroke compared to Mk.II, notable changes include the increase in conrod length and the switch from crossplane to flatplane crankshaft, which surprisingly did not increase vibration in the higher RPM range because the longer conrod length counteracted the increase in secondary vibration inherent in flatplane design.
The flatplane crank was adopted partly due to Rob Walker's proposed successor to the 4WD Ferguson P99 Formula 1 having a front engine layout, which could not accommodate exhaust pipes that merge with pipes from exhaust ports on the opposing banks on crossplane arrangement, but this project did not materialise. Later, such elaborate crossplane exhaust system became known as "bundle of snakes" on Ford GT40, but was a feature of FWMV Mk.I and Mk.II.
This Mk.III developed at 9500rpm, propelling Jim Clark, Lotus 25 and Team Lotus to 7 wins, 7 pole positions, 6 fastest laps and the World Championship title.
Mk.4 was developed for 1964 with yet larger bore and shorter stroke with a larger exhaust valve and 12:1 compression ratio to result in at 9750rpm.
One-off Mk.5 was made with larger inlet valve for, which was delivered to Lotus and said to be used by Clark in the 1964 season. Mk.4 and Mk.5 scored five wins, seven pole positions and seven fastest laps.
A one-off 4 valve Mk.6 had 1.04" intake and 0.935" exhaust valves, new pistons, cylinder sleeves and crankshaft, and had gear driven camshafts as opposed to the previous chain drive. This engine made at 10300rpm and went to Lotus during 1965. Another 4 valve one-off, Mk.7, was built with 1.107" intake and 1.043" exhaust and all the new Mk.6 parts for at 10500rpm, and was delivered to Brabham. However, these engines started showing reliability problems.
Except for these two one-off 4 valve engines with characteristic ribbed cam covers, all the FWMVs used in 1965 season were 2 valve Mk.5 or earlier versions with various levels of upgrade. This was because Coventry Climax had started the FWMW flat-16 project, which was finally announced at the beginning of 1965, and had more than a handful in things needed to be developed or solved, so the 4 valve configuration on FWMV did not get completely developed nor did reach a series production. However, Jim Clark was able to win 6 championship races, 6 pole positions and 6 fastest laps to become the 1965 World Champion.
At the end of the 1965 season, the failure of FWMW project left Coventry Climax with no 3 litre successor to FWMV for the next season, so a 2 Litre version of FWMV was assembled using Mk.4 bore and Mk.II stroke and was used by Lotus in 1966 as a stopgap until 3 litre BRM H-16 engines became available but with little success. However Jim Clark won the 1967 Tasman Series with this engine in his Lotus 33.
Overall, FWMV powered Cooper, Lotus, Brabham, Lola and Scirocco-Powell Formula One cars won 22 World Championship Grand Prix races.

FWMW

By the middle of the 1962 season, Peter Windsor Smith and Walter Hassan were convinced that the only viable route to more power was through higher revs, and the decision was made, partly in light of Harry Mundy's experiences on the 1.5-Litre supercharged BRM V16, to develop a 1.5-Litre flat-16 designated the FWMW. Design work started in 1963, and a prototype was running on the bench in late 1964 with two flatplane flat-8 cranks end-to-end, shrunk-fit to a central spur gear at 90 degrees phase shift to each other.
Work on this project continued through the later years of the 1.5 Litre formula with Lotus and Brabham the likely recipients. The engine was fairly compact at 30.9" long and 22.6" wide, but there were a number of design issues still to solve before the formula ran out. Not only had the engine shown no power advantage over the V8 despite its much higher rev limit, but it had mechanical problems that would have required either a major rework to solve properly or, at the least, the need for complete engine rebuilds after 3 hours of running.
From the outset the largest problem was torsional vibration of the crankshaft, at one time necessitating a ban on using below 4000rpm on the bench. The vibration often caused one or other of the cranks to shear itself off the central spur gear, resulting in the engine becoming two aphasic flat-8s, or the parallel quill shaft overheated and disintegrated.
The central power-take-off system using the parallel shaft was intended to reduce torsional vibration of the long crankshaft, but destructive vibration appeared no matter what was changed in firing order, crank counter-weight configuration or crankshaft weight distribution.
As a result, Coventry Climax could not derive revenues from the project, and was further forced to develop a 2-Litre version of FWMV so that Lotus, who built one Lotus 33 chassis specifically for FWMW, and were counting on using FWMW's anticipated 3-Litre successor, could avoid missing the first races of the 1966 season. Neither the old 4 cylinder FPF nor the 8 cylinder FWMV could be enlarged to 3 Litres, and the 11 years old 2.5-Litre FPE parts had been sold off in their entirety and were in the hands of Paul Emery, who was in the process of enlarging FPE to 3-Litres as described in the above [|FPE section].
Partly because of this project's grand scale failure, and partly because of Jaguar's take over in 1963, Coventry Climax could not develop a 3-Litre successor to FWMW, and announced its withdrawal from the F1 engine business, with its reputation and the long-standing relationship with Lotus seriously tarnished.

Jaguar V12

Having designed and developed the successful Jaguar XK engine under the guidance of William Heynes at SS Cars Ltd, Walter Hassan and the team were tasked to develop a Jaguar 5.0 L DOHC V12 engine when Coventry Climax was purchased by Jaguar in 1963.
It was about this time when Walter Hassan convinced Harry Mundy, who had left to become the Technical Editor of The Autocar magazine in 1955, to rejoin the team, which now included the Jaguar engineer, Claude Bailey, who always worked under Bill Heynes from the days of XK engine development. William Heynes was the executive in charge of the team, who retired in July, 1969.
This engine was initially conceived in 1954 for Le Mans 24 Hour Race by combining two Jaguar XK cylinder heads on a common 60 degree block.
The first prototype was assembled in 1964 with LM8 aluminium alloy sand cast block and flanged cast iron liners, EN4A forged and nitrided 7 main bearing crankshaft for 4994 cc. This racing engine, with its intake ports in between the intake and the exhaust camshafts, came out to be the fuel injected 5L DOHC Jaguar XJ13 engine in 1966, but more importantly, it was further developed by the same team into the series-production 5.3 L SOHC V12 engine. This engine, with characteristically long intake tracts connecting the four carburetors on the outside of cam covers to the intake ports inside the V angle, came out to the market on Jaguar E-Type in 1971, on Jaguar XJ12 in 1972, and, together with the later 6.0 L version, remained in production until 1997.

CFA and CFF

After the designing was finished on the 5.3 L V12 and the Jaguar XJ, Jaguar wanted a modern engine for a smaller version of XJ. Although Jaguar had gained access to the 2.5 Litre iron block Daimler V8 with the take over of Daimler in 1960, it was a pushrod engine designed in the 1950s, and was not particularly small or light as it was based on, and had many common components with, the 4.5 Litre version.
In response, Coventry Climax designed an aluminium crossflow chain-driven SOHC cylinder head somewhat similar to the 5.3L V12 head, on FWMV Mk.4 block with a stroked crank and wet sump. Tecalemit-Jackson fuel injection was used for the development on this 2,496 cc CFA V8, and the engine was installed on Leonard Pelham Lee's personal Triumph 2000 Estate.
The testing was promising, and a 1,812 cc CFF version was prototyped, however, this 1.8 - 2.5 Litre baby XJ project was killed along with the V8 engines when British Motor Holdings merged with Leyland Motor Corporation in 1968 for the strategy to eliminate internal competition against what came out to be the Rover SD1.

F1 engines

The F1 engines were as follows :
Some notable Coventry Climax-powered cars: