Chevrolet straight-6 engine


The Chevrolet straight-six engine was Chevrolet's sole engine from 1929 through 1954, and was the company's base engine starting in 1955 when they added the small block V8 to the lineup. It was completely phased out in North America by 1990; in Brazil, GM held on to their fuel-injected version through the 1998 model year. It was replaced by more recently developed V6 and four-cylinder engines. Many popular cars and trucks, including the Chevrolet Camaro, Chevrolet Impala, and Chevrolet Suburban used the inline-six as the base engine. Chevrolet did not offer another inline-six until the 2002 General Motors Atlas engine's debut in the Chevrolet TrailBlazer.

1st Generation (1929 Stovebolt Era)

"A six for the price of a four"

The first mass-produced GM inline 6 was introduced in 1929 on Chevrolet cars and trucks, replacing the company's first inline-4. Richard Grant insisted that the new design boast overhead valves. Chevrolet had long been known for its "valve-in-head" four-cylinder engines. William S. Knudsen's cast-iron wonder was produced through 1936.

194

It was in size and produced. This engine used a forged steel crankshaft with three bearings and cast-iron pistons. Bore and stroke was. The 194 was shared with Chevrolet and GMC trucks for 1935 and 1936.
A balanced crankshaft was introduced for 1932, while a higher compression ratio upped output to.
This engine was used in all Chevrolet passenger cars 1929-1933, and the 1934 "Standard" models.
Applications:
A ( version was used by Chevrolet in the Master series of cars in 1935 and 1936.

207

variant was used by Chevrolet trucks in 1934, 1935, and 1936. The 1934 Chevrolet "Master Deluxe" series used this engine, as did all 1935-1936 Chevrolet passenger cars. This newly revised engine put out.
In 1935 and 1936, GMC used an Oldsmobile 213 L-head engine. For 1937 and 1938, they used Oldsmobile's [|230] L-head engine.

Second generation: 1937-1963

The next-generation Chevrolet inline 6 was introduced in 1937 in the US and 1964 in Brazil, and phased out in 1963 in the US, and 1979 in Brazil. It is often known as the "Blue Flame" engine, although that name was only officially applied beginning in 1953, and then only for one certain model of the engine: the 235ci with 3 carburetors applied in Corvettes.

216

This engine had a displacement with a bore and stroke of. A four-bearing crankshaft was added, along with 6.5:1 compression pistons, for. A new cylinder head in 1941 increased output to, and 6.6:1 compression gave the 1949 model. This generation did not use a fully pressurized oiling system. The connecting rods were oiled using an "oil trough" built into the oil pan that had spray nozzles that squirted a stream of oil at the connecting rods, thus supplying oil to the rod bearings.
Rod bearings were made of babbitt cast integral with the rod. The bearing was adjustable for wear by removing copper shims placed between the rod cap and connecting rod. In this way specified oil clearance could be maintained.
This engine was also used in GM's British Bedford truck. In the late 1930s rival Austin decided to get into the 2-3 ton truck market and in a crash program based the design on the basic architecture of this "Stove Bolt" engine, except that they added detachable shell main and con-rod bearings and pressurized lubrication. That Austin engine, in six-cylinder form, post war, went on to power cars such as the Austin Sheerline and Princess, and the Jensen Interceptor and 541. Austin also lopped off two cylinders and in that form various versions, with various capacities, powered cars such as the Austin 16, A70 Hampshire and Hereford, A90 Atlantic, the Austin-Healey 100-4 and the Austin Gipsy, a generation of commercial vans, as well as some models of the iconic London black taxi.

235

In 1941, a version of the 216 engine was introduced for use in large trucks. Both the bore and stroke of for Powerglide use. The "Blue Flame" moniker had been used in Chevrolet advertising since 1934. A blue rather than yellow flame within the cylinder meant that perfect combustion was achieved, promised GM's ad men.
From 1954 to 1963, the high-pressure 235 engine with mechanical valve lifters was used in some trucks. From 1956 to 1962, all 235 engines used in cars had hydraulic lifters.
The original 1953 Corvette engine was the high-pressure 235 engine equipped with mechanical lifters. A 235 engine was used in the 1954 Corvette and into 1955. The Corvette 235 was equipped with the same slightly higher-lift camshaft as used in the 261 truck engine and used triple side draft, single barrel, Carter Model YH carburetors mated to a PowerGlide transmission and dual exhaust manifold.
The Chevrolet is known as one of the great Chevrolet engines, noted for its power and durability. It was gradually replaced by the third generation 230, beginning in 1962.
Canadian-production GMC trucks used the 216 and 235 Chevrolet straight-six engines as their base light-duty truck powerplant in the late 1940s and early 1950s in Canada, not the United States. The 216 was used from 1947 to 1953, and the 235 was used in 1954 light-duty trucks only. Medium-duty GMC trucks used US built GMC engines in the 248, 270, and up sizes prior to 1954.
Toyota built the similar Toyota F engine from 1955 to 1974, although it used a modified head from the previous "stovebolt" engine.

261

In 1954, a truck engine was introduced as an optional Jobmaster engine for heavy-duty trucks. This engine was very similar to the 235 engine, except for a different block casting with a larger piston bore of, two extra coolant holes between three paired cylinders, and a slightly higher lift camshaft. This engine was offered as a step up from the 235 starting in 1954. It was offered in parallel with the GMC V6 engine in 1960 until 1963, when it was discontinued. The 261 US truck engine had mechanical lifters and was available from 1954 to 1962.
The 235 and 261 truck engines were also used by GMC Truck of Canada. The 1955–1962 Canadian full-size Pontiac car had a standard 261-cubic-inch engine that had hydraulic lifters. This engine was not sold in the US, but was very similar to the US truck 261.
The 261 engines were also used in light trucks and the Chevrolet Veraneio from 1958 to 1979 in Brazil.
Produced 148hp.

Third generation: 1962-1988

Chevrolet's third-generation inline six was introduced in 1962 and was produced through 1988. Although the exterior dimensions were similar to previous Chevrolet OHV inline six-cylinders, this generation was lighter and had a different cast-in bell housing pattern it shares with all Chevrolet engines designed and produced after 1954, including the modern LS-series "small-block" and "big-block" V8s.
By the time the third-generation 6-cylinders were being designed and developed, Chevrolet was the most popular brand of vehicles in the world, and sales and production of vehicles and engines were into the millions of units per year with increasing markets for Chevrolet engines both within General Motors and outside the company in the industrial, commercial, agricultural, military, or transportation markets both in the U.S. and worldwide.
A inline four-cylinder engine with bore and stroke identical to the inline 6 was produced and many internal parts were common to both engines.
There were other major differences between the third-generation 6-cylinder/153 4-cylinder and previous Chevrolet inline OHV engines.
Two variants of the third generation six were produced - the 194/230/250 cid short deck, and the tall deck 292.
The first use was in the newly introduced 1962 Chevy II; the following year, Chevrolet passenger cars adopted it and used this it until 1977. Chevrolet/GMC trucks, which previously used the stovebolts, also used some members of this family from 1963 through 1984, as did Pontiac in 1964 and 1965. A inline-4 version of this engine was offered in the Chevy II/Nova line through the 1970 model year. After several years of steadily declining sales, the straight six was dropped from Chevrolet's full-sized cars for 1973, for the first time since 1928; it would be restored in 1977. Sidenote: the base six cost about US$334 less than a V8, and weighed some less.
Overseas, the third generation of the inline six was mass-produced in Brazil. It was used in the Chevrolet Opala from 1969 to 1992. It was already used in light trucks as the A and Chevrolet Veraneio. The Brazilian version of the GMT400 - the Brazilian Chevrolet Silverado - is powered with a 4.1 instead of the Vortec 4300 V6. Brazilian produced sixes manufactured to the 2001 model year gained multipoint fuel injection, unlike the US-manufactured sixes, which retained the Rochester Monojet one-barrel carburetor. Aftermarket port fuel injection and re-engineered cylinder heads have been the norm although parts for the six e.g. aftermarket intake manifolds, exhaust headers, and/or hybrid cylinder heads based on the small block are costlier than the Small Block Chevrolet, unlike the rival AMC inline six. Besides Brazil, the six was also manufactured in Argentina and South Africa.

194

The 194 or was shared between Chevrolet and GMC trucks. Bore and stroke are. Within Chevy trucks it was standard in the 1964 to 1966 G10 -ton vans. It was not available in the C/K10 -ton trucks. In the G10 vans it was rated at gross and gross of torque. General Motors' Argentinian subsidiary also developed a four-cylinder version called the "Chevrolet 110" for their Opel K 180 compact car.
was a smaller bore of version of the Chevrolet straight-6 engine. One oddity is the crankshaft bolt pattern - in lieu of the Chevrolet V8 bolt pattern the Pontiac V8 bolt pattern is used.

230

The 230 or replaced the long-stroke, second generation version. Bore and stroke are. It was also used by Chevrolet and GMC trucks, primarily for the half-tons. It produced. It was also built in Latin America and was in production in South Africa until at least 1982, where it powered a multitude of different cars. A four-cylinder version of this engine was also built, as the Chevrolet "" engine.
The stroked 250 version produced for Chevrolet and GMC, with a bore and stroke of. Between 1975 and 1984, an integrated cylinder head was produced, with one-barrel intakes for passenger cars, and two-barrel intakes for trucks after 1978. The "integrated" cylinder head and intake manifold claimed to have resulted in increased low end torque and fuel economy inclusive of a smoother operation which pre-dated NVH. Some pundits consider the integrated cylinder head as a relic of the malaise era when it was phased out of production in 1984 prior to the introduction of the 4.3 L where it was common to swap the earlier head in place of the integrated head since the extra weight resulted in warpage - especially with light truck and van use including fleets.
During the mid-1970s, the Buick 231 and 4.3 L V6, essentially a Chevy small-block V-8 with the two rear cylinders removed, were replacing the Chevrolet 250 for use in passenger cars and light duty trucks/vans. Passenger car use of the engine was discontinued after the 1979 model year for North America, since the six was restricted to light truck usage. Brazil held on to the 250 until 1998 for passenger cars, when the Chevrolet Omega A was replaced by rebadged Australian Holdens. It was used in Brazil until 2001 in Chevrolet Silverado when the engine line was discontinued. The Brazilian produced sixes gained multipoint fuel injection, distributorless ignition system and redesigned cylinder heads which had smaller intake ports.
It would be GM's final inline six until the introduction of the GM Atlas engine in late 2001. It was also used for a number of large sedans by Chevrolet of South Africa.
When the long duration races restarted in Brazil, in 1973, the Opala found a great competitor, the Ford Maverick, which was powered by an engine almost one liter larger in displacement. It took Bob Sharp and Jan Balder, who shared a ride to second place in the "24 Hours of Interlagos" in August of that year in an Opala, to pressure GMB to field a more powerful racing engine.
By coincidence, engine development manager Roberto B. Beccardi was working on this engine hop-up project out of his own initiative, but lacked factory support or approval. This impulse came right from these two pilots.
Thus, in July 1974, GM started to offer the 250-S engine as an option for the Opala 4100. It was slightly different from the version launched two years later: the project engine was similar to the four-cylinder units, did not get a vibration damper, and used the cooling fan from the standard 2500, with four blades instead of six.
The 250-S has and at 2,400 rpm.
The L22 was a Inline-six engine produced from 1967 to 1979. The '78 Camaro had and of torque with the 250. The LD4 was a I6 engine produced strictly in 1978. The LE3 was a I6 engine produced from 1979 to 1984.

292

The engine was used in Chevrolet and GMC trucks as well as some full-sized Chevrolet cars beginning in the early 1960s; the block deck is taller, along with a relocated passenger-side engine mount. Flywheel bolt pattern is the same as the six and V8 - with bolts for the flywheel if produced after the 1966 model year. Production of the engine was shifted to Mexico in 1980, and later variants of this engine were marketed as the "L25". The 292 retained the separate intake and exhaust manifolds as used with the short deck motors. It was GM's last pushrod straight-six engine used from 1963 to 1988 in Chevrolet trucks, including UPS truck chassis. Outputs in 1988 : at 3,800 rpm and at 1,600 rpm.
Eventually the L25 was replaced by the 4.3 L 90-degree V6.

GMC engines

as a marque really only produced a few engine designs, the straight six, a V8, and a V6 which was also available as a V12 for a brief period. GMC used many engines from other GM divisions, as noted below.

228

GMC replaced the Pontiac 223 with their own 228 in 1939. This OHV engine was produced through 1953. With a cylinder bore of, this is the smallest low-deck engine. All four low-deck engines have a stroke of and use connecting rods.

[|236]

GMC also developed an OHV/pushrod engine in 1939. The 236 was produced through 1942. This is a low-deck engine. The bore was.

248

Those same years, GMC produced a engine, the 248, which was similar to the 236. The bore was. Stroke is 3.8125. Power in 1955 listed as 100 HP @ 3100 rpm; torque 202 lbs ft @ 1000 rpm.

256

The 256 was similar to the 236 and 248. It was also an OHV/pushrod engine, and was built for just two years, 1940 and 1941. This is the largest low deck engine. Bore was 3.78125 and stroke was 3.8125. Power listed as 91 Net HP @ 3000 rpm; torque 201 Net lbs ft @ 1000 rpm. Not listed after 1942.

270

The last GMC-only straight six was the 270. It was produced from 1941 through 1963, and was an OHV/pushrod engine. This is a raised-deck engine. The bore was 3.78125". Power listed in 1963 as 133 HP @ 3600 rpm; torque 244 lbs ft @ 1300 rpm.

302

The GMC inline six was produced from 1952 to 1960, when it was replaced by the V6. It has a square bore/stroke ratio of. This is the largest raised-deck engine. It was originally designed for the GMC military M135 and M211. It was used in military 2-ton trucks with the Hydramatic transmission; however, the engine was a sealed engine for snorkel/submersion use, had an electric fuel pump, and other features such as a deep sump oil pan. From 1952 to 1959, GMC manufactured the civilian 302 engine, which was not sealed, had a mechanical fuel pump, and used a "standard" oil pan. Power listed in 1959-160 HP @ 3600 rpm; torque 268 lbs ft @ 1600 rpm. This engine was popular with hotrod enthusiasts because it delivered tremendous power for an inline six engine at the time, is built with a heavy cast block, and can take quite a bit of abuse.

426

The with a bore and stroke of GMC inline six appeared in 1940s 4x4 Cab Over Engine trucks made in Pontiac, MI. Power ratings for 1955 were 190 HP @ 3200 rpm; torque 350 lbs ft @ 1000 rpm. It also appeared in large GMC trucks in the 1950s ending in 1955.

503

The ; GMC inline six was more numerous than the 426 inline six, starting in 1952 and ending with the 1959 model year. In the 1957-1959 model years this engine was listed as 225 HP@3200 rpm and 436 lbs ft torque@ 1200 rpm. The GMC 630, 660, 720, and 750 Series of the 1950s offered the 503.

Atlas

In 2002, GM announced a family of straight six engines, the Atlas. Branded by GM under the Vortec name, the Vortec 4200 or Atlas LL8 was the last straight six available to the GM family of vehicles.

Duramax Diesel

Isuzu 6H Engine

The Isuzu 6H engine is installed in GM medium-duty trucks as the Duramax LG4.

LM2 Engine

In 2018 Chevrolet showed off a 3.0 liter turbocharged Diesel I6 engine concept in a 2019 Chevrolet Silverado. Starting in the 2020 model year, the LM2 engine is available in the light-duty Chevrolet Silverado.