Capacitor discharge sintering


Capacitor discharge sintering is an electric current assisted sintering technique. The technique is based on storage of electromagnetic energy in a high voltage capacitor bank, and discharge into the sintering apparatus at low voltage and high current through step-down transformers on a pre-compacted powder compact which is kept under pressure. The sintering mould and Electrodes are similar to those employed in field assisted sintering techniques such as spark plasma sintering and single electromagnetic pulse sintering technologies.
The method, analogous to resistive sintering, is a direct evolution of a welding technology named Capacitor Discharge Welding. CDS seems like an improvement of the less powerful capacitor discharge compaction patented by W.Knoess and M.Schlemmer.
Advantages of the technique are:
The technique has been studied by Element Six under the name of electro-discharge sintering. This name has been adopted by many authors in the past to describe a range of different technologies which typically adopt very high voltages and completely different machines. For this reason the technique which employs low voltages and high currents adapted from capacitor discharge welding has been named capacitor discharge sintering. Other authors also refer to this technology as spark plasma compaction.

Developments

Capacitor discharge sintering is at an experimental/research stage of development in Germany at the Ruhr-Universität Bochum where a prototype machine is installed.
Industrialization and evolution of the technology is ongoing in , a start-up company from Torino. EPoS has patented a CDS based process which is claimed to produce components with improved properties at a competitive production cost. The company active since 2010 is employing solely proprietary technologies based on CDS to develop and produce abrasives, cemented carbide blanks, and a wide range of components produced with metallic alloys, semiconductors and composites.