Calorimetry


Calorimetry is the science or act of measuring changes in state variables of a body for the purpose of deriving the heat transfer associated with changes of its state due, for example, to chemical reactions, physical changes, or phase transitions under specified constraints. Calorimetry is performed with a calorimeter. The word calorimetry is derived from the Latin word calor, meaning heat and the Greek word μέτρον, meaning measure. Scottish physician and scientist Joseph Black, who was the first to recognize the distinction between heat and temperature, is said to be the founder of the science of calorimetry.
Indirect calorimetry calculates heat that living organisms produce by measuring either their production of carbon dioxide and nitrogen waste, or from their consumption of oxygen.
Lavoisier noted in 1780 that heat production can be predicted from oxygen consumption this way, using multiple regression. The dynamic energy budget theory explains why this procedure is correct. Heat generated by living organisms may also be measured by direct calorimetry, in which the entire organism is placed inside the calorimeter for the measurement.
A widely used modern instrument is the differential scanning calorimeter, a device which allows thermal data to be obtained on small amounts of material. It involves heating the sample at a controlled rate and recording the heat flow either into or from the specimen.

Classical calorimetric calculation of heat

Cases with differentiable equation of state for a one-component body

Basic classical calculation with respect to volume

Calorimetry requires that a reference material that changes temperature have known definite thermal constitutive properties. The classical rule, recognized by Clausius and Kelvin, is that the pressure exerted by the calorimetric material is fully and rapidly determined solely by its temperature and volume; this rule is for changes that do not involve phase change, such as melting of ice. There are many materials that do not comply with this rule, and for them, the present formula of classical calorimetry does not provide an adequate account. Here the classical rule is assumed to hold for the calorimetric material being used, and the propositions are mathematically written:
The thermal response of the calorimetric material is fully described by its pressure as the value of its constitutive function of just the volume and the temperature. All increments are here required to be very small. This calculation refers to a domain of volume and temperature of the body in which no phase change occurs, and there is only one phase present. An important assumption here is continuity of property relations. A different analysis is needed for phase change
When a small increment of heat is gained by a calorimetric body, with small increments, of its volume, and of its temperature, the increment of heat,, gained by the body of calorimetric material, is given by
where
The latent heat with respect to volume is the heat required for unit increment in volume at constant temperature. It can be said to be 'measured along an isotherm', and the pressure the material exerts is allowed to vary freely, according to its constitutive law. For a given material, it can have a positive or negative sign or exceptionally it can be zero, and this can depend on the temperature, as it does for water about 4 C. The concept of latent heat with respect to volume was perhaps first recognized by Joseph Black in 1762. The term 'latent heat of expansion' is also used. The latent heat with respect to volume can also be called the 'latent energy with respect to volume'. For all of these usages of 'latent heat', a more systematic terminology uses 'latent heat capacity'.
The heat capacity at constant volume is the heat required for unit increment in temperature at constant volume. It can be said to be 'measured along an isochor', and again, the pressure the material exerts is allowed to vary freely. It always has a positive sign. This means that for an increase in the temperature of a body without change of its volume, heat must be supplied to it. This is consistent with common experience.
Quantities like are sometimes called 'curve differentials', because they are measured along curves in the surface.

Classical theory for constant-volume (isochoric) calorimetry

Constant-volume calorimetry is calorimetry performed at a constant volume. This involves the use of a constant-volume calorimeter. Heat is still measured by the above-stated principle of calorimetry.
This means that in a suitably constructed calorimeter, called a bomb calorimeter, the increment of volume can be made to vanish,. For constant-volume calorimetry:
where

Classical heat calculation with respect to pressure

From the above rule of calculation of heat with respect to volume, there follows one with respect to pressure.
In a process of small increments, of its pressure, and of its temperature, the increment of heat,, gained by the body of calorimetric material, is given by
where
The new quantities here are related to the previous ones:
where
and
The latent heats and are always of opposite sign.
It is common to refer to the ratio of specific heats as

Calorimetry through phase change, equation of state shows one jump discontinuity

An early calorimeter was that used by Laplace and Lavoisier, as shown in the figure above. It worked at constant temperature, and at atmospheric pressure. The latent heat involved was then not a latent heat with respect to volume or with respect to pressure, as in the above account for calorimetry without phase change. The latent heat involved in this calorimeter was with respect to phase change, naturally occurring at constant temperature. This kind of calorimeter worked by measurement of mass of water produced by the melting of ice, which is a phase change.

Cumulation of heating

For a time-dependent process of heating of the calorimetric material, defined by a continuous joint progression of and, starting at time and ending at time, there can be calculated an accumulated quantity of heat delivered, . This calculation is done by mathematical integration along the progression with respect to time. This is because increments of heat are 'additive'; but this does not mean that heat is a conservative quantity. The idea that heat was a conservative quantity was invented by Lavoisier, and is called the 'caloric theory'; by the middle of the nineteenth century it was recognized as mistaken. Written with the symbol, the quantity is not at all restricted to be an increment with very small values; this is in contrast with.
One can write
This expression uses quantities such as which are defined in the section below headed 'Mathematical aspects of the above rules'.

Mathematical aspects of the above rules

The use of 'very small' quantities such as is related to the physical requirement for the quantity to be 'rapidly determined' by and ; such 'rapid determination' refers to a physical process. These 'very small' quantities are used in the Leibniz approach to the infinitesimal calculus. The Newton approach uses instead 'fluxions' such as, which makes it more obvious that must be 'rapidly determined'.
In terms of fluxions, the above first rule of calculation can be written
where
The increment and the fluxion are obtained for a particular time that determines the values of the quantities on the righthand sides of the above rules. But this is not a reason to expect that there should exist a mathematical function. For this reason, the increment is said to be an 'imperfect differential' or an 'inexact differential'. Some books indicate this by writing instead of. Also, the notation đQ is used in some books. Carelessness about this can lead to error.Planck, M., page 57.
The quantity is properly said to be a functional of the continuous joint progression of and, but, in the mathematical definition of a function, is not a function of. Although the fluxion is defined here as a function of time, the symbols and respectively standing alone are not defined here.

Physical scope of the above rules of calorimetry

The above rules refer only to suitable calorimetric materials. The terms 'rapidly' and 'very small' call for empirical physical checking of the domain of validity of the above rules.
The above rules for the calculation of heat belong to pure calorimetry. They make no reference to thermodynamics, and were mostly understood before the advent of thermodynamics. They are the basis of the 'thermo' contribution to thermodynamics. The 'dynamics' contribution is based on the idea of work, which is not used in the above rules of calculation.

Experimentally conveniently measured coefficients

Empirically, it is convenient to measure properties of calorimetric materials under experimentally controlled conditions.

Pressure increase at constant volume

For measurements at experimentally controlled volume, one can use the assumption, stated above, that the pressure of the body of calorimetric material is can be expressed as a function of its volume and temperature.
For measurement at constant experimentally controlled volume, the isochoric coefficient of pressure rise with temperature, is defined by

Expansion at constant pressure

For measurements at experimentally controlled pressure, it is assumed that the volume of the body of calorimetric material can be expressed as a function of its temperature and pressure. This assumption is related to, but is not the same as, the above used assumption that the pressure of the body of calorimetric material is known as a function of its volume and temperature; anomalous behaviour of materials can affect this relation.
The quantity that is conveniently measured at constant experimentally controlled pressure, the isobaric volume expansion coefficient, is defined by

Compressibility at constant temperature

For measurements at experimentally controlled temperature, it is again assumed that the volume of the body of calorimetric material can be expressed as a function of its temperature and pressure, with the same provisos as mentioned just above.
The quantity that is conveniently measured at constant experimentally controlled temperature, the isothermal compressibility, is defined by

Relation between classical calorimetric quantities

Assuming that the rule is known, one can derive the function of that is used above in the classical heat calculation with respect to pressure. This function can be found experimentally from the coefficients and through the mathematically deducible relation

Connection between calorimetry and thermodynamics

developed gradually over the first half of the nineteenth century, building on the above theory of calorimetry which had been worked out before it, and on other discoveries. According to Gislason and Craig : "Most thermodynamic data come from calorimetry..." According to Kondepudi : "Calorimetry is widely used in present day laboratories."
In terms of thermodynamics, the internal energy of the calorimetric material can be considered as the value of a function of, with partial derivatives and.
Then it can be shown that one can write a thermodynamic version of the above calorimetric rules:
with
and
Again, further in terms of thermodynamics, the internal energy of the calorimetric material can sometimes, depending on the calorimetric material, be considered as the value of a function of, with partial derivatives and, and with being expressible as the value of a function of, with partial derivatives and .
Then, according to Adkins, it can be shown that one can write a further thermodynamic version of the above calorimetric rules:
with
and
Beyond the calorimetric fact noted above that the latent heats and are always of opposite sign, it may be shown, using the thermodynamic concept of work, that also

Special interest of thermodynamics in calorimetry: the isothermal segments of a Carnot cycle

Calorimetry has a special benefit for thermodynamics. It tells about the heat absorbed or emitted in the isothermal segment of a Carnot cycle.
A Carnot cycle is a special kind of cyclic process affecting a body composed of material suitable for use in a heat engine. Such a material is of the kind considered in calorimetry, as noted above, that exerts a pressure that is very rapidly determined just by temperature and volume. Such a body is said to change reversibly. A Carnot cycle consists of four successive stages or segments:
a change in volume from a volume to a volume at constant temperature so as to incur a flow of heat into the body
a change in volume from to a volume at a variable temperature just such as to incur no flow of heat
another isothermal change in volume from to a volume at constant temperature such as to incur a flow or heat out of the body and just such as to precisely prepare for the following change
another adiabatic change of volume from back to just such as to return the body to its starting temperature.
In isothermal segment, the heat that flows into the body is given by
and in isothermal segment the heat that flows out of the body is given by
Because the segments and are adiabats, no heat flows into or out of the body during them, and consequently the net heat supplied to the body during the cycle is given by
This quantity is used by thermodynamics and is related in a special way to the net work done by the body during the Carnot cycle. The net change of the body's internal energy during the Carnot cycle,, is equal to zero, because the material of the working body has the special properties noted above.

Special interest of calorimetry in thermodynamics: relations between classical calorimetric quantities

Relation of latent heat with respect to volume, and the equation of state

The quantity, the latent heat with respect to volume, belongs to classical calorimetry. It accounts for the occurrence of energy transfer by work in a process in which heat is also transferred; the quantity, however, was considered before the relation between heat and work transfers was clarified by the invention of thermodynamics. In the light of thermodynamics, the classical calorimetric quantity is revealed as being tightly linked to the calorimetric material's equation of state. Provided that the temperature is measured in the thermodynamic absolute scale, the relation is expressed in the formula

Difference of specific heats

Advanced thermodynamics provides the relation
From this, further mathematical and thermodynamic reasoning leads to another relation between classical calorimetric quantities. The difference of specific heats is given by

Practical constant-volume calorimetry (bomb calorimetry) for thermodynamic studies

Constant-volume calorimetry is calorimetry performed at a constant volume. This involves the use of a constant-volume calorimeter.
No work is performed in constant-volume calorimetry, so the heat measured equals the change in internal energy of the system. The heat capacity at constant volume is assumed to be independent of temperature.
Heat is measured by the principle of calorimetry.
where
In constant-volume calorimetry the pressure is not held constant. If there is a pressure difference between initial and final states, the heat measured needs adjustment to provide the enthalpy change. One then has
where

Books