California Pacific International Exposition half dollar


The California Pacific International Exposition half-dollar, sometimes called the California Pacific half-dollar or the San Diego half-dollar, is a commemorative fifty-cent piece struck by the United States Bureau of the Mint in 1935 and 1936. Robert I. Aitken designed the coin. Its obverse depicts Minerva and other elements of the Seal of California; the reverse shows buildings from the California Pacific International Exposition, which the coin was issued to honor.
Legislation for the half-dollar moved through Congress without opposition in early 1935, and Aitken was hired to design it. Once his creation was approved, the San Francisco Mint produced 250,000 coins, but expected sales did not materialize. Left with over 180,000 pieces they could not sell, the Exposition Commission went back to Congress for further legislation so it could return the unsold pieces and have new coins, dated 1936, hoping for greater sales in the second year of the fair's run. Although the Commission was successful in getting the legislation passed, it was less so in selling the coins, and 150,000 1936-dated pieces were returned to the Mint. The coins, of either date, sell in the low hundreds of dollars today.

Background and authorization

The California Pacific International Exposition was a world's fair held in San Diego's Balboa Park in 1935 and 1936. One of the largest expositions of its kind, it was held on of land, and cost $20 million. The fair attracted some 3.75 million visitors during its two-year run.
At that time, commemorative coins were not sold by the government—Congress, in authorizing legislation, usually designated an organization which had the exclusive right to purchase them at face value and sell them to the public at a premium. In the case of the California Pacific Exposition half-dollar, it was the California Pacific International Exposition Co.
for the Exposition, 1935
California's George Burnham introduced a bill for a California Pacific Exposition half-dollar into the House of Representatives on February 19, 1935. It was referred to the Committee on Coinage, Weights, and Measures. John J. Cochran of Missouri, acting chairman of that committee, reported back to the House on April 12 with the recommendation that it pass after small technical amendments were made. The bill called for the issuance of a maximum of 250,000 half dollars. Cochran noted that Congressman Burnham had appeared before the committee, representing that there would be no expense to the government, and sent a letter stating the same. Burnham had also written that the Exposition had considerable participation by the federal government, and its officials expected 7 to 10 million people to attend. The following day, Cochran had the bill considered by the House, which passed the recommended amendment and then the bill itself without any debate.
The Senate received the bill on April 15, and referred it to the Banking and Currency Committee. On April 23, the committee, through its chairman, Duncan U. Fletcher of Florida, recommended that the bill pass, with a report similar to that of the House. On April 26, the bill passed the Senate on Fletcher's motion without any discussion or dissent. President Franklin D. Roosevelt signed it on May 3, 1935.

Preparation and design

California Senator William G. McAdoo, former Secretary of the Treasury under Woodrow Wilson, wrote to the incumbent Treasury Secretary, Henry Morgenthau, proposing that the late president appear on the half-dollar; Morgenthau wrote back calling the idea "interesting" and suggested it be directed to the Exposition Commission, which was responsible for securing designs. The January 1935 issue of The Numismatist, which went to press before the congressional actions, reported that there were plans for 50,000 silver dollar and 150,000 half-dollar coins depicting President Roosevelt.
Sculptor Robert Aitken, creator of other commemorative coins including the $50 Panama-Pacific issue, was hired to design the California Pacific half-dollar. He submitted plaster models to the Commission of Fine Arts, charged by a 1921 executive order by President Warren G. Harding with making recommendations regarding public artworks, including coins. Commission sculptor-member Lee Lawrie took the lead in examining the models, and they were approved on July 5, 1935, though Lawrie questioned the legality of having coins omitting the mottoes and. Aitken subsequently added to the obverse. After final approval, the models were shipped to the Medallic Art Company of New York for reduction to coin-sized hubs, which were then sent to the Philadelphia Mint, where the working dies were made. These dies were in turn were shipped to the San Francisco Mint.
, also depicts Minerva.
Aitken's obverse shows elements of the California State Seal with a seated depiction of Minerva. She wears a helmet and holds a staff with her right hand, her left rests on a shield with on it. On the shield is an aegis, with the head of Medusa affixed; between goddess and shield is a cornucopia overflowing with produce, symbolic of California's vast resources. A grizzly bear is to the left of Minerva. Behind them, in the distance, is a sailing ship and gold miner, with the hills of the Sierra Madre as background. The name of the issuing country and the denomination surround the central design, with under Minerva. The reverse shows two buildings constructed for the Exposition, and part of the California State Buildings at the fair, the California Tower and Chapel of St. Francis. The outline which surrounds the buildings is said to suggest Spanish Mission architecture but Anthony Swiatek and Walter Breen, in their book on commemorative coins, identify it as a tressure, found on a some medieval gold coins. The name of the exposition surrounds the design, with the date, and among the buildings.
Numismatic author Don Taxay called the half-dollar "a very distinguished coin artistically," and said of its reverse, "I cannot think of another architectural motif that has been treated so successfully on a United States coin." Art historian Cornelius Vermeule liked the California Pacific half-dollar, deeming the Minerva "one of the most powerful uses of the facing figure in American numismatic art". He deemed Aitken's design influenced by the pediments and other works he had sculpted during the 1920s and 1930s, including the pediment for the United States Supreme Court Building. He felt the depiction of the buildings on the reverse was "good enough for what it pretends to show," and noted that the monogrammatic style of the artist's initials was imitated by Gilroy Roberts when signing his obverse of the Kennedy half-dollar. Vermeule noted that the lettering "confirms the strength and balance of the total visual experience".

Production, distribution, and collecting

250,132 coins were minted in San Francisco in August 1935. 132 were sent to Philadelphia and held for inspection and testing at the 1936 annual meeting of the Assay Commission. The 250,000 remaining coins were sent from San Francisco to the Bank of America branch in San Diego, which handled distribution, and placed on sale at the fair on August 12 at $1 each. Despite considerable publicity, only some 68,000 sold, 2,000 being held by the Exposition authorities.
Although commemorative coin collecting was becoming popular in 1935, the mintage of a quarter million coins, far in excess of some other issues of the era, meant that investors were indifferent to the California Pacific issue. With sales of the 1935–S half-dollar coming to a standstill, the Exposition Commission was well aware of this problem. Thus, they sought relief from Congress in the form of an act allowing them to return unsold half dollars for new ones, dated 1936. Coin collectors would view this as a new variety and possibly buy both, and melting the returned coins would decrease the supply and increase the attractiveness of the remaining 1935-S specimens.
Accordingly, on January 6, 1936, Congressman Burnham introduced legislation to accomplish this. On February 17, the committee reported back through New York's Andrew Somers, noting that the bill provided that the exchange would take place without expense to the United States, and recommending that it pass. When Burnham brought the matter to the House floor on March 16, Michigan's Jesse Wolcott asked how the exchange would be done without expense to the government, and Burnham affirmed that the Exposition Commission would meet all expenses. He explained that the coins had been received so late in the year there had not been time to sell many. There were no further questions, and the bill passed the House without objection.
The Senate committee reported on April 17, adding provisions requiring that the coins be dated 1936, regardless of when struck, and that they be produced at only one mint, chosen by the Director of the Mint, in line with other commemorative coin bills that committee had been reporting. Early numismatic author David M. Bullowa noted these provisions, designed to prevent the creation of varieties, were thus inserted in a bill that itself created a new variety. The Senate considered the bill on April 24, and it was amended and passed without debate or opposition. As the two versions passed were not identical, the bill returned to the House of Representatives where, on April 27, that body at Burnham's motion, without debate or opposition, agreed to the Senate amendments. President Roosevelt signed the bill on May 6.
G. Aubrey Davidson, chairman of the Exposition Commission, wrote to Acting Director of the Mint Mary M. O'Reilly on May 16, 1936, asking that the coins be minted as quickly as possible, as heavy attendance was expected at the fair around Memorial Day at the end of May. The production at the Denver Mint made the California Pacific half-dollar the first commemorative to be struck at San Francisco and at Denver, but not at Philadelphia. It is the only pre-1954 commemorative with that distinction. A total of 180,092 of the 1936-D were produced, representing the number returned plus 92 assay coins. The new coins were placed on sale at $1.50 each.
There was a spike in prices for many commemorative coins in 1936, but due to the relatively high mintages of both the 1935-S and 1936-D, the California Pacific coins sold badly, and when the Exposition closed in late 1936, fewer than 30,000 of the 1936-D had been sold. On January 27, 1937, Davidson wrote to the Director of the Mint, Nellie Tayloe Ross, asking her to allow the return of some 150,000 coins for refund, the glut blamed on having a relatively short period to sell them. Once the Mint had granted permission, the Exposition Commission placed the 1935-S and 1936-D pieces it withheld from the melting pot on sale at $3 each. Swiatek, in his 2012 volume on commemoratives, stated that the price increase was "to create the appearance of demand and future rarity. This didn't work."
In 1938, Emil Klicka, treasurer of the Exposition, offered the 1936-D for sale at $1 each, with a limit of ten. The 1935-S coins were available at $2. Large hoards of both dates were held by insiders for decades, including one holding of 31,050 of the 1935-S, amounting to nearly half the extant mintage. These were gradually dispersed from the 1960s to the 1980s. In 1962, the 1935-S was worth $9 in uncirculated condition, and the 1936-D was worth $11. The edition of the Red Book published in 2018 lists the 1935-S for between $100 and $160, depending on condition, with the 1936-D from between $100 and $225. A near-pristine 1935-S sold at auction in 2014 for $4,994.