Broadband Global Area Network


The Broadband Global Area Network is a global satellite network with telephony using portable terminals. The terminals are normally used to connect a laptop computer to broadband Internet in remote locations, although as long as line-of-sight to the satellite exists, the terminal can be used anywhere. The value of BGAN terminals is that, unlike other satellite Internet services which require bulky and heavy satellite dishes to connect, a BGAN terminal is about the size of a laptop and thus can be carried easily. The network is provided by Inmarsat and uses three geostationary satellites called I-4 to provide almost global coverage.

Details

Downlink speeds of high-end BGAN terminals are up to 492 kbit/s and upload speeds are also up to 492 kbit/s - Best Effort as BGAN Background IP is a contended channel. As with all geosynchronous satellite connections, latency is an issue. Common latency is 1–1.5 seconds round trip for the Background IP service. It is slightly better for the Streaming services at 800 ms – 1 second. This latency is mainly due to the great distance that has to be traveled before a packet can reach the Internet, but is slightly exacerbated by the back-end technology as normal latency over a Very small aperture terminal system is roughly 550 ms. BGAN users frequently use PEP software or other TCP packet accelerators to improve performance, and the BGAN user is often assigned a non-routable IP address and routed through a NAT server; this increases security and helps control usage costs.
BGAN terminals are made by multiple manufacturers. They all have similar capabilities. The main two that apply to basic BGAN usage are the Standard Background IP and Telephone Voice. Data costs from the many ISPs that offer BGAN service average about per Background Megabyte. Voice calling is on average US$1 per min and varies slightly based on the destination of the call.
BGAN can be easily set up by anyone, and has excellent voice calling quality. It uses the L band, avoiding rain fade and other issues affecting satellite systems operating at higher frequency bands.

Signal acquisition

The actual process of connecting a BGAN terminal to the satellite is fairly straightforward. The BGAN terminal needs to find its position using GPS, before it can negotiate with the satellite, so a clear view of the sky is necessary to begin with. Once the GPS position is obtained, it does not need to do that again unless it is moved to a different region. Obtaining the initial GPS position can take a few minutes. The terminal then needs a line-of-sight to the geostationary satellite so a user would normally be outside, and have a general idea of what direction the satellite would be. Turning the terminal slowly by hand, it will give some indication when the satellite is found. Then usually with the touch of one button, the terminal auto-negotiates with the satellite and connects. The average pointing time for a BGAN unit is 2 minutes, under a minute with an experienced user and a good signal. BGAN is being used in the world today for disaster response, telemedicine, business continuity, remote site monitoring, military use, and recreational use.

Terminals

Terminal manufactures are Thrane & Thrane, Hughes Network Systems, and . Terminal cost is between US$1800 and US$5000 varying based on class and capabilities of the various systems. Depending on terminal type users can connect their computers via USB, Bluetooth, WiFi, or Ethernet connection. This allows them to access the Internet, check e-mail, download files, or any other Internet activity they might do at a home or office. Many come equipped with a regular RJ11 Phone Jack for making PSTN calls, using an ordinary telephone handset, and many terminals have an ISDN connection to do ISDN phone calls. Some BGAN terminals have both so users can make either type of phone call. Users can also send faxes or SMS text messages. Most BGAN terminals can support a router or switch device so users can plug in multiple computers or even VOIP phones and set up a mobile office.

Coverage and availability

The BGAN service is accessible globally, excluding the poles.

Service types

There is more than one kind of BGAN service available from Inmarsat for BGAN terminals.

Standard

The Standard BGAN service from Inmarsat provides Internet, phone, SMS texting, Fax, ISDN and streaming services. It is designed for use with all BGAN terminals except the Hughes 9502 which uses the BGAN M2M service.

Standard +

The Standard + Plus BGAN service introduced by Inmarsat in May 2017 provides unlimited Internet use for a low fixed monthly price using consumer grade routing. While not as high priority routing as Standard BGAN service, Standard + does have the same priority as the IsatHub Inmarsat network which is used worldwide. Standard + has a low monthly subscription that includes 5 Megabytes each month, and then bills at a fixed "tier" rate on if more than 5 Megabytes are used each month.

M2M

BGAN M2M Service, launched in February 2012, is a low-bandwidth service for remote SCADA or M2M equipment monitoring and control. BGAN M2M service is offered in 2, 5, 10 and 20 Megabyte monthly service plans. BGAN M2M service does not charge for overhead communication, and the smallest billing increment is 1 kilobyte, which is ideal for M2M communication. BGAN M2M service is currently only available to the Hughes 9502 BGAN terminal.

Link

BGAN Link, launched in March 2012, is for fixed locations that require 5 to 30 Gigabytes of data transferred per month. In late 2013, Inmarsat introduced Unlimited BGAN Link "GEO" plans for certain countries/regions including Central and South America, Australia and lower Africa. Service fees with BGAN Link are far less than standard BGAN service, making this service more comparable to VSAT satellite dish services. One advantage of BGAN terminals are their low power usage which is much less than satellite dish systems that use 90 to 150 watts when idle or transmitting. BGAN Link service is only available with Class 1 BGAN terminals and service terms are 3 and 12 months terms. Terminals may move 4 times per year with 30 days notice with a US +$1,000 transfer cost, and must be at location for no less than 3 months. All standard BGAN services are available with BGAN Link. While BGAN Link service is global, approval by Inmarsat for activation is required.

Variants

BGAN terminals are allowed to be used on the open ocean on a moving vessel. But because the vessel will be moving there is great chances to lose the signal and then the connection. Inmarsat informed DPs that the Core network is not blocking these connections.
Inmarsat has created the FleetBroadband service that uses the I4 satellites for maritime communication.
Standard BGAN terminals cannot be used on moving aircraft due to doppler shift effects. An alternative service using more intelligent terminals to talk to the I4 satellites, named SwiftBroadband, has been developed for aircraft use.

News coverage

correspondent Alex Crawford used BGAN equipment to provide live coverage, from a moving truck, of the news network's coverage of the liberation of Tripoli, Libya, in August 2011. This was done by the producer continuously readjusting the BGAN terminal to track the BGAN satellite. In-Motion BGAN satellite terminals are often used by media outlets for streaming video on the move. Another advantage to in-motion BGAN systems are for saving precious minutes when arriving at a live event. A media vehicle equipped with an in-motion system does not require pointing time since the in-motion BGAN terminal is already locked on satellite.

High Data Rate

Since late 2013 the service is available in an enhanced form known as HDR. HDR can exceed symmetric 700 kbit/s on select terminals and also support bonding for a total bandwidth exceeding 1 Mbit/s. As of 2016 the only terminal to support the full set of modes and bonding is the Cobham Explorer 710.