Bionix AFV


The Bionix is a family of tracked Singaporean armoured fighting vehicles developed by Singapore Technologies Kinetics. Intended to augment the Singapore Army's aging M113 armoured personnel carriers, it is the first indigenous armoured vehicle to be developed in Southeast Asia. The Bionix has been operational with the Singapore Armed Forces since 1999 in a wide variety of adaptations including the Bionix II, Bionix 25 and Bionix 40/50 variants.
Aside from domestic use, ST Kinetics has been marketing the Bionix to countries that wish to retire their old M113s from front-line service.

Production History and Development

Along with the growth and development of the Singapore Armed Forces during the mid 1980s came a need to bolster the existing fleet of M113 Armored Personnel Carriers. This prompted the Ministry of Defence to source for a fleet of armored vehicles to operate in tandem with the current fleet of AMX-13 SM1 light tanks.
With the participation of the SAF, the Defence Materiel Organisation, MINDEF's systems acquisition house, was appointed to conduct a technology study and recommend the direction for the project. A market survey was conducted in which various armored vehicles including the Warrior Tracked Armoured Vehicle, the M2/M3 Bradley Fighting Vehicle, and the Schützenpanzer Marder were evaluated. The findings from the market survey showed that none of the off-the-shelf vehicles met the specific requirements of the SAF. Therefore, the decision was made to develop a vehicle locally. Local development was necessary not only because of a lack of suitable off-the-shelf designs, but also as an opportunity to build up the capability of the local defense industry. Known as "BIONIX", the IFV was the product of a tripartite team of engineers and technical staff from Singapore Technologies Automotive, DMO and G5 Army, working jointly with HQ Armour to produce a fighting machine tailored to the specific operational requirements of the Army. Key considerations during the design process included high mobility and agility, low weight, amphibious capability, and adequate protection and firepower.
Development of the Bionix began in 1988. It took several years before leaving the prototyping phase in 1995 and finally being commissioned on 26 March 1997. ST Automotive was awarded a S$2.5 billion contract in March 1997 to supply several hundred Bionix IFVs to the Singapore Armed Forces. The first production vehicles were inducted by the 42nd Battalion, Singapore Armoured Regiment in July 1999.
The Bionix IFV has since been succeeded by the Bionix II, which entered a trial service with the Singapore Armed Forces in 2005 with a Company from 41 SAR. In October 2006, The Bionix II was declared operationally ready with 42 SAR being the first fully equipped Bionix II battalion.

Description

;Protection
The hull and turret are of all-welded-steel construction with modular MEXAS passive armour protection. Additional armour protection can be installed with an add-on layer of spaced passive armour.
;Engine
The Bionix is a compact design produced to meet the conditions of Pacific rim countries where small size is a great asset when it comes to travelling among rubber plantations and over roads and bridges not designed for heavy vehicles. The power provided by the Detroit Diesel engine to drive its 23 tonnes, ensures the Bionix is able to overcome the most difficult terrain. Future upgrades in power ratings can be developed according to needs.
The integrated power pack is mounted to the right of the vehicle and can be removed from the Bionix as a complete unit in under 15 minutes. The engine is coupled to the L-3 Combat Propulsion Systems HMPT-500EC fully hydro mechanical transmission, with the final drives being provided by David Brown Defence Systems. The engine compartment is also fitted with an automatic fire detection and dry-powder fire suppression system with a supplementary manual back up.
;Interior
The layout of the Bionix is conventional with the driver at the front left, the power pack situated at the front right and the turret in the center with the troop compartment at the rear. Access to the troop compartment at the rear of the vehicle is by a power-operated ramp, which can operate as an emergency access and exit door. A single hatch is installed over the troop compartment.
The driver enters via a roof hatch that opens to the left rear. When driving closed-down, observation is via three day periscopes, while the center periscope can be rapidly replaced by an image-intensification periscope for driving at night. The driver guides the vehicle using a small steering wheel rather than tillers and, as an automatic transmission is fitted, there are just two pedals - accelerator and brake. The instrument panel is mounted on the left, with the transmission selection box on the right.
In the turret, the gunner's station is on the right and the commander's station is on the left, each with a single hatch cover. The turret traverses through 360°. Traverse and weapon elevation is by all-electric digital control. Both the gunner and commander have a turret stop button and are able to lay and fire the weapons. The gunner has the turret control box mounted to the right of his position and both turret-crew members have an adjustable seat. The communications equipment is installed in the turret bustle.
The basic production models lacks an in-built air conditioning and NBC protection system, but can be fitted if/when needed.
;Aiming
The gunner has a twin-control handles and a day/thermal sight, with a magnification of x8 and two fields of view, with stadias for the 25mm cannon and 7.62mm coaxial machine gun. The commander has an optical relay from the gunner's sight and a single control handle. The vehicle commander has a further five day periscopes to give observation to the turret front, left side and rear; the gunner has three periscopes to give observation to the right and rear.

Variants

Prototypes