Barrier toll system


A barrier toll system is a method of collecting tolls on highways using toll barriers at regularly spaced intervals on the toll road's mainline. Motorists are typically charged a flat-rate toll, unlike toll roads with a ticket system where the toll rate is determined by the distance traveled or number of exits passed. Some highways use coin-drop machines on toll plazas. For toll roads whose ramps have no toll plazas, it is possible to exit the toll road before the mainline toll plaza, use local streets to bypass it, then re-enter the highway via an interchange on the other side of the toll plaza. Thus it is possible to drive on some barrier toll roads while paying less or not paying at all; this is the basis of the "open" descriptor.
There are two main methods by which planners may prevent such toll evasion. One method is to simply remove highway entrances after and exits before toll plazas, so that detouring around toll plazas becomes such an inconvenience that most users will not bother. Another method is to place toll plazas on exits before and entrances after mainline toll barriers, so that all users will always have to pay at least one toll, regardless of entry or exit point. The second method is sometimes called a "barrier-ramp" system; it can be deemed open or closed, respectively, depending upon whether it is consistently applied to all entrances and exits, or only some of them. Examples of the second method may be found on the Everett Turnpike, the Garden State Parkway, and the Autostrada dei Laghi.
The barrier toll system can create more congestion than the ticket system, since it forces all motorists to stop for several toll plazas each time they travel down the highway. Open road tolling can alleviate this issue by allowing most users to proceed through the barrier at full speed.

Highways where used

The following is a list of some toll roads that use the barrier system: