Australian twenty-cent coin


The Australian twenty-cent coin of the Australian decimal currency system was issued with conversion to decimal currency on 14 February 1966, replacing the florin which was worth two shillings - a tenth of a pound.
To date, three different obverse face designs have been used: from 1966 to 1984, the head of Queen Elizabeth II by Arnold Machin; from 1985 to 1998, the head by Raphael Maklouf; from 1999 to 2019, the head by Ian Rank-Broadley and since 2019, the head by Jody Clark. The obverse has the inscription AUSTRALIA and the year-of-issue on the right hand side, and ELIZABETH II on the left hand side.
From 1966 to 1994, the design for the reverse face was Stuart Devlin's platypus. With the exception of commemorative issues, it continues to be the standard design for the reverse face.
The United Nations 20c was the first commemorative coin issued for circulation in 1995, while the 1995 standard platypus design was only available in mint and proof sets.
Five-cent, ten-cent, twenty-cent, and fifty-cent coins are legal tender up to the sum of $5.

Commemorative coins

There have been various commemorative issues with following reverse face designs:
Excepting commemorative varieties, there have been a number of varieties of regular issue coins identified by collectors, on both the obverse and reverse faces. The first of these seen is a highly prized variety of the 1966 issue, with a "wave" on the top of the bottom stroke of the 2 in "20" on the reverse face. These coins are now sold for over $200, depending on condition. Other varieties of the reverse face generally involve the length and number of the claws of the platypus. These are prone to change if incorrect stamping pressure is used in creation of dies for the coins. Such variations are most frequently seen on coins produced at foreign mints.
For the Broadley head obverse, to date there have been several variations:
In 1981, a large number of 20-cent coins were required, far more than the capacity of the Royal Australian Mint facility in Canberra, leading to some coins being minted at other facilities. The Canadian impression of the 20-cent coin is known as the "Ottawa Mint" version, which may be misleading as, post 1976, the Ottawa Mint only produced precious metal commemorative coins, like the Perth Mint, meaning the coins may have been produced at the Royal Canadian Mint's Winnipeg facilities.
Due to differences in the milling and annealing process, the Canadian variety of the 1981 20-cent coin is distinctive to attentive collectors and even cash handlers. The top and bottom edges of the milling is rounded over, not squared like the Australian and London varieties, and despite being in circulation for well over 25 years, even when well worn, the fields remain shiny, and not dulled like those produced at other mints. These qualities are also observed in Canadian coinage of similar ages.
Some of the Canadian coins were produced with a shortened first toe on the right claw. These are referred to as the " claw" variety.

Mintages

The quantity of 1981 and 1982 mintages of the 20-cent coin was sufficient to not require many coins released for circulation until 1990.
The 1983 and 1984 coins were struck for circulation with mintages of 55.11 million and 27.82 million coins respectively, but were never released for general circulation. Later they were resmelted by the Royal Australian Mint, leaving the coins relatively rare. Significant premiums have been paid for a small number of mint rolls from these years that have shown up in auctions.
The Royal Australian Mint website reports an issue of 2.7 million coins for 1985, but no 20c was minted for 1988. None were released in 1983-84 and there were no coins minted for circulation in 1986–1993 and 1995