With the war in Europe demanding most of the available material for the British, Australia was not in a position to purchase weapons from the United Kingdom or the United States, and so they had to develop their own submachine guns. The British Sten submachine gun was taken as the basis for the Austen. The barrel, body and trigger mechanism of the Mark II Sten were copied, while the folding stock and bolt, with separate firing pin and telescopic cover over the return spring, were copied from the German MP40. The folding stock also included a screwdriver and a cleaning rod which both unscrewed from the tubes of the stock. The weapon also featured twin pistol-style grips; the latter containing a small spare parts container inside. The weapon had a selective-fire feature permitting the firer to fire single shots or fully automatic at 500 rounds per minute. An interesting production feature of the Austen was that some parts were manufactured by the diecasting process. These parts were the magazine housing, part of the mechanism for the stock and the forward half of the magazine. The magazine loader was also diecast. The two firms manufacturing the Austen were specialist diecasting companies. There was a suppressed version made for use by Z Special Force. An improved version, the Mark II Austen, was introduced but was not ready until 1946, after the end of the Second World War. This model made even more extensive use of diecasting; the large grip assemblies at both the front and back of the gun were produced in this way. 200 examples were built, and these were both adopted and declared obsolete in August 1946. The Austen never achieved the level of popularity that the Owen gun achieved. This was largely because the Owen was a very reliable weapon and although the Austen was an improvement on the basic Sten, it was never able to achieve the Owen's reliability. Additionally, it has been asserted that the Owen was much more suited to jungle warfare. No doubt the Austen's side-mounted magazine and bolt proved a hindrance to soldiers in the jungle, as this aspect necessarily meant that the working parts were more exposed to dirt and therefore prone to fouling due to the cocking slot's position on the right-hand side of the body. Regarded as obsolete by 1945, the Austen was rarely used in subsequent decades. In contrast, the Owen was widely used by the Australian Army until the 1960s.
