Anglo-Australian Telescope
The Anglo-Australian Telescope is a 3.9-metre equatorially mounted telescope operated by the Australian Astronomical Observatory and situated at the Siding Spring Observatory, Australia at an altitude of a little over 1,100 m. In 2009, the telescope was ranked as the fifth highest-impact of the world's optical telescopes. In 2001–2003, it was considered the most scientifically productive 4-metre-class optical telescope in the world based on scientific publications using data from the telescope.
The telescope was commissioned in 1974 with a view to allowing high quality observations of the sky from the southern hemisphere. At the time, most major telescopes were located in the northern hemisphere, leaving the southern skies poorly observed. It was the largest telescope in the Southern hemisphere from 1974-1976, then a close second to the Victor M. Blanco Telescope from 1976 until 1998, when the first ESO Very Large Telescope was opened. The AAT was credited with stimulating a resurgence in British optical astronomy. It was built by the United Kingdom in partnership with Australia but has been entirely funded by Australia since 2010. Observing time is available to astronomers worldwide.
The AAT was one of the last large telescopes built with an equatorial mount. More recent large telescopes have instead adopted the more compact and mechanically stable altazimuth mount. The AAT was, however, one of the very first telescopes to be fully computer-controlled, and set new standards for pointing and tracking accuracy.
History
British astronomer Richard van der Riet Woolley pushed for a large optical telescope for the southern hemisphere in 1959. In 1965, Macfarlane Burnet, president of the Australian Academy of Science, wrote to the federal education minister John Gorton inviting the federal government to support a joint British-Australian telescope project. Gorton was supportive, and nominated the Australian National University and CSIRO as Australia's representatives in the joint venture; he was unsuccessful in his attempts to induce NASA to join the project. Gorton brought the proposal before cabinet in April 1967, which endorsed the scheme and agreed to contribute half the capital and running costs. An agreement with the British was finalised a few weeks later and a Joint Policy Committee started work on construction planning in August 1967. It took until September 1969 for plans to be finalised. The agreement initially committed the specification to a telescope design based on the American Kitt Peak telescope until its deficiencies were known. Both the horseshoe mount and the gearing system needed improvements. Although the revised gear system was considerably more expensive it was significantly more accurate, lending itself well to future applications.The mirror blank was made by Owens-Illinois in Toledo, Ohio. It was then transported to Newcastle, England where Sir Howard Grubb, Parsons and Co took two years to grind and polish the mirror's surface. Mitsubishi Electric built the mount which was constructed by August 1973. First light occurred on 27 April 1974. The telescope was officially opened by Prince Charles on 16 October 1974.
Structure and Telescope
The telescope is housed within a seven-story, circular, concrete building topped with a 36m diameter rotating steel dome. It was designed to withstand the high winds prevailing at that location. The slit is narrow. The dome is required to move with the telescope to avoid obstruction. The top of the dome is 50m above ground level.The telescope tube structure is supported inside a massive 12m diameter horseshoe, which rotates around the polar axis for tracking the sky. Total moving mass is 260 tonnes.
The telescope has various foci for flexible instrumentation: originally there were three top-end rings which can be exchanged using the dome crane during the daytime. One was for f/3.3 prime-focus, with corrector lenses and a cage for a human observer taking photographs ; one has a large secondary mirror giving an f/8 Cassegrain focus; and a third top-end has smaller f/15 and f/36 secondary mirrors. A fourth top-end was built in the 1990s to give a 2-degree field of view at prime focus, with 400 optical fibres feeding the 2dF instrument and its later enhancements AAOmega and HERMES.
Instruments
The AAT is equipped with a number of instruments, including :- The Two Degree Field facility, a robotic optical fibre positioner for obtaining spectroscopy of up to 400 objects over a 2° field of view simultaneously.
- The University College London Échelle Spectrograph, a high-resolution optical spectrograph which has been used to discover many extrasolar planets.
- IRIS2, a wide-field infrared camera and spectrograph.
Comparisons
| # | Name / Observatory | Image | Aperture | M1 Area | Altitude | First Light |
| 1. | BTA-6 | 238 inch 605 cm | 26 m2 | 1975 | ||
| 2. | Hale Telescope | 200 inch 508 cm | 20 m2 | 1949 | ||
| 3. | Mayall Telescope | 158 inch 401 cm | 10 m2 | 1973 | ||
| 4. | Víctor M. Blanco Telescope | 158 inch 401 cm | 10 m2 | 1976 | ||
| 5. | Anglo-Australian Telescope | 153 inch 389 cm | 12 m2 | 1974 | ||
| 6. | ESO 3.6 m Telescope | 140 inch 357 cm | 8.8 m2 | 1976 | ||
| 7. | Shane Telescope | 120 inch 305 cm | ~7 m2 | 1959 |