An air caster is a pneumaticlifting device used to move heavy loads on flat, non-porous surfaces. Its operation is similar to a hovercraft, as it uses a thin layer of air as a way to float a very small distance off the ground. Compressed air enters an airbag shaped like a torus, and when the bag is filled it creates an airtight seal with the ground, and forces more air into the center of torus, eventually causing the air to flow over the bag and to raise the load above the ground. The compressed air is forced under the airbag, pushing it and the load less than a millimeter off the ground.
Advantages
Because air casters are virtually friction-free, the force required to move them is very low, often around one to five lbs. per 1,000 lbs. of weight. Air casters are also omni-directional, meaning they move with equal ease in any direction.
Limitations
Air casters require a smooth, non-porous surface in order to maintain lift and operate properly. Cracks and other surface defects can interrupt the proper flow of air, causing the air cushion to dissipate and thus lose its ability to lift. This limits their application to fields like manufacturing, where such surfaces are abundant. Also necessary is connection to a system which provides compressed air, as well as a power supply. Usually, standard concrete warehouse or factory floors provide an adequate surface. Large cracks and expansion joints may need to be filled in. Overlay material can provide options for moving over rough surfaces.
History
The air caster was invented by Harry A Mackie in December 1961 as the “pendant air bearing load supporting device” for General Motors Corporation as an alternative to the overhead crane, which ran opposed to a rail, creating friction free movement. In November 1963, Mackie, on behalf of General Motors Corporation, filed a patent for an “air bearing support with automatic air flow regulation”. This was the first air caster designed to be used on the ground. In January 1964, David R. Snoeyenbos, while working for General Motors Corporation, revised the design of the air caster, and filed a patent for a “reversible air bearing support”. General Motors Corporation manufactured air casters, or “air bearings” for several years, then sold the rights to Snoeyenbos, who moved to Decatur, Illinois to found Airfloat. He launched his company from his brother’s manufacturing shop in 1964, and officially incorporated as the Airfloat Corp in 1967.
