Advanced Electric Propulsion System is a solar electric propulsion system for spacecraft that is being designed, developed and tested by NASA and Aerojet Rocketdyne for large-scale science missions and cargo transportation. "The first application of the AEPS" is to propel the PPE module of Gateway to be launched in 2023. The PPE module is built by MAXAR space solutions in Palo Alto, California. Two identical AEPS engines would consume 25 kW being generated by the roll-out solar array assembly, which can produce over 60 kW of power. The Power and Propulsion Element for the Lunar Gateway will have a mass of 8-9 metric tons and will be capable of generating 50 kW of solar electric power for its Hall thrusters for maneuverability, which can be supported by chemical monopropellant thrusters for high thruster attitude control maneuvers.
Overview
Solar-electric propulsion has been shown to be reliable and efficient, and allows a significant mass reduction of spacecraft. High-power solar electric propulsion is a key technology that has been prioritized because of its significant exploration benefits in cis-lunar space and crewed missions to Mars. The AEPS Hall thruster system was originally developed since 2015 by NASA Glenn Research Center and the Jet Propulsion Laboratory to be used on the now canceled Asteroid Redirect Mission. Work on the thruster did not stop following the mission cancellation in April 2017 because there is demand of such thrusters for a range of NASA, defense and commercial missions in deep space. Since May 2016, further work on AEPS has been transitioned to Aerojet Rocketdyne that is currently designing and testing the engineering-model hardware. This is a contract worth $65 million, where Aerojet Rocketdyne developed, qualified and will deliver five 12.5 kW Hall thruster subsystems, including thrusters, PPUs and xenon flow controllers.
Design
AEPS is based on the 12.5 kW development model thruster called 'Hall Effect Rocket with Magnetic Shielding'. The AEPS solar electric engine makes use of the Hall-effect thruster in which the propellant is ionized and accelerated by an electric field to produce thrust. To generate 12.5 kW at the thruster actually takes a total of 13.3 kW including power needed for the control electronics. Four identical AEPS engines would theoretically need 4 x 13.3 = 53.2 kW, more than the 50 kW generated by solar panels of the PPE. It is stated that the AEPS array is intended only to use 40 kW of the 50 kW, so the maximum thrust would be limited to around 1.77 N. The engineering model is also undergoing various vibration tests, thruster dynamic and thermal environment tests. AEPS is expected to accumulate about 5,000 hr by the end of the contract and the design aims to achieve a flight model that offers a half-life of at least 23,000 hours and a full life of about 50,000 hours. The three main components of the AEPS propulsion engine are: a Hall thruster, Power Processor Unit, and the Xenon Flow Controller. The thrusters are throttleable over an input power range of 6.67 - 40 kW with input voltages ranging from 95 to 140 V. The estimated xenon propellant mass for the Lunar Gateway would be 5,000 kg. The Preliminary Design Review took place in August 2017. It was concluded that "The Power Processing Unit successfully demonstrated stable operation of the propulsion system and responded appropriately to all of our planned contingency scenarios."
