Acyl halide


An acyl halide is a chemical compound derived from an oxoacid by replacing a hydroxyl group with a halide group.
If the acid is a carboxylic acid, the compound contains a –COX functional group, which consists of a carbonyl group singly bonded to a halogen atom. The general formula for such an acyl halide can be written RCOX, where R may be, for example, an alkyl group, CO is the carbonyl group, and X represents the halide, such as chloride. Acyl chlorides are the most commonly encountered acyl halides, but acetyl iodide is the one produced on the largest scale. Billions of kilograms are generated annually in the production of acetic acid.
The hydroxyl group of a sulfonic acid may also be replaced by a halogen to produce the corresponding sulfonyl halide. In practical terms this is almost always chloride to give the sulfonyl chloride.

Preparation

Aliphatic acyl halides

On an industrial scale, the reaction of acetic anhydride with hydrogen chloride produces a mixture of acetyl chloride and acetic acid:
A key industrial route to propionic anhydride involves thermal dehydration:
Another routes is the Reppe carbonylation of ethylene with propionic acid and nickel carbonyl as the catalyst:
Common syntheses of acyl chlorides also entail the reaction of carboxylic acids with phosgene, thionyl chloride, and phosphorus trichloride Phosphorus pentabromide is used for acyl bromides, which are rarely of value.

Aromatic acyl chlorides

Benzoyl chloride is produced from benzotrichloride using either water or benzoic acid:
As with other acyl chlorides, it can be generated from the parent acid and other chlorinating agents phosphorus pentachloride or thionyl chloride.
Representative laboratory routes to aromatic acyl halides are comparable to those for aliphatic acyl halides. For example, chloroformylation, a specific type of Friedel-Crafts acylation which uses formaldehyde as a reagent, or by the direct chlorination of benzaldehyde derivatives.

Acyl fluorides

Of commercial interest, acyl chlorides react with HF to give acyl fluorides. Aromatic acyl fluorides are conveniently prepared directly from carboxylic acids, using stable, inexpensive commodity chemicals: PPh3, NBS and Et3N-3HF in a bench-top protocol. Cyanuric fluoride converts carboxylic acids to acyl fluorides.

Reactions

Acyl halides are rather reactive compounds often synthesized to be used as intermediates in the synthesis of other organic compounds. For example, an acyl halide can react with:
In the above reactions, HX is also formed. For example, if the acyl halide is an acyl chloride, HCl is also formed.

Multiple functional groups

A molecule can have more than one acyl halide functional group. For example, "adipoyl dichloride", usually simply called adipoyl chloride, has two acyl chloride functional groups; see the structure at right. It is the dichloride of the 6-carbon dicarboxylic acid adipic acid. An important use of adipoyl chloride is polymerization with an organic di-amino compound to form a polyamide called nylon or polymerization with certain other organic compounds to form polyesters.
Phosgene is a very toxic gas that is the dichloride of carbonic acid. Both chloride radicals in phosgene can undergo reactions analogous to the preceding reactions of acyl halides. Phosgene is used a reactant in the production of polycarbonate polymers, among other industrial applications.

General hazards

Volatile acyl halides are lachrymatory because they can react with water at the surface of the eye producing hydrohalic and organic acids irritating to the eye. Similar problems can result if one inhales acyl halide vapors. In general, acyl halides are irritants to the eyes, skin and mucous membranes.