Absolute Time in Pregroove


Absolute Time in Pregroove is a method of storing information on an optical medium, used on CD-R and other writable discs. ATIP information is only readable on CD-R and CD-RW drives, as read-only drives don't need the information stored on it. The information indicates if the disk is writable and information needed to correctly write to the disk.

Usage

ATIP is used as a method of putting data on an optical medium, specifically:
These features are rather important to the function as it lets the drive know if it is writable. If the disc is re-writable, and the ATIP is damaged, it will not be able to write more than once. Also, it lets the drive know what the maximum write speed available for the disc is, and how much space the disc holds.

Function

Every writable disc has at least four layers:
The polycarbonate layer has a spiral pre-groove that is formed when the disc substrate is injection molded against a stamper. The read/write laser in the drive will follow this pre-groove track as it is writing, in order to maintain the spacing between the written tracks with a high degree of accuracy. This spiral has a wobble frequency introduced into it, which the drive can read while it is writing. The drive will synchronize the rotation speed to the reference speed of the wobble signal, allowing it to maintain an accurate linear velocity. This wobble is further modulated with a timecode reference signal containing minutes, seconds and frames. This modulated signal is known as ATIP.