AMiBA was initially configured as a 7-element interferometer, using 0.576 m Cassegrain dishes mounted on a 6 m carbon fibre hexapod mount. It is located on Mauna Loa, Hawaii, and observes at 3 mm to minimize foreground emission from other, non-thermal sources. The telescope has a retractable shelter, made from seven steel trusses and PVC fabric. The receivers are based on monolithic microwave integrated circuit technology, with low noise amplifiers cooled to 15 K, which have 20 GHz bandwidths and provide 46 dB of amplification. The signals are mixed with a local oscillator to reduce their frequency, prior to correlation with an analog correlator. The system temperatures are between 55 and 75 K. AMiBA started in 2000, with funding for 4 years from the Cosmology and Particle Astrophysics Project of the Taiwan Ministry of Education. A 2-element prototype was set up on Mauna Loa in 2002. Further funding for a second 4 years was provided by the National Science Council. The mount arrived on site in 2004, and the platform was installed in 2005. The first 7 elements were then installed, and the telescope's first light was in September 2006, observing Jupiter. The telescope was dedicated in October 2006 to Yuan-Tseh Lee. The array was upgraded to have thirteen 1.2 m dishes in 2009. After extensive testing and calibration, scientific observations resumed in 2011. It is further expandable up to 19 elements.
SZE Observations
The primary goal of AMiBA is to observe both the temperature and polarization anisotropies in the cosmic microwave background at multipoles between 800 and 8,000, as well as observing the thermal Sunyaev-Zel'dovich effect in clusters of galaxies, which has a maximum decrement around 100 GHz. In its initial configuration, it measures up to multipoles of 3,000 with a resolution of around 6 arcminutes. The telescope only observes at night during good weather, using planets for calibration. Six clusters were imaged in 2007: the Abell clusters1689, 1995, 2142, 2163, 2261 and 2390, which have redshifts between 0.091 and 0.322. For the largest and brightest four of these—Abell 1689, 2261, 2142 and 2390—comparisons were made with X-ray and Subaruweak lensing data to study the cluster layout and radial properties, specifically of the mass profiles and baryon content. 13-element results from the YTLA were published in this paper.
Intensity Mapping of Molecular Gas
The YTLA has been repurposed with the goal of detection and characterization of molecular gas at high redshift through the technique of intensity mapping. Molecular gas, which is primarily in the form of the hydrogen molecule H2, is the material from which stars form. Understanding the gas content and evolution throughout the history of the Universe informs astronomers about the processes of star formation and galaxy growth. Unfortunately, cold H2 is not easily detectable. Carbon monoxide is commonly used as a tracer of H2. The YTLA uses the technique of intensity mapping to study molecular gas. Rather than attempting to detect individual, distant and faint galaxies directly, the YTLA measures the statistical properties of many galaxies over a very large volume. Although it is much smaller than powerful telescopes such as ALMA and the VLA, the YTLA can provide critical and unique information on galaxy evolution. The intensity mapping technique is used over a wide range of wavelengths to study the distant Universe. An upgrade of analog and digital infrastructure at the YTLA was necessary to enable IM. In particular, a digital correlator based on CASPER technology and the ASIAA-developed 5 GS/s sampler were developed. The digital correlator produces 2 x 2 GHz bandwidth in each of two polarizations for 7 antennas.