ADI Bumble Bee


The ADI Bumble Bee is an ultralight gyrocopter marketed by Aircraft Designs Inc. It was the first of its kind when it flew in 1983 and is still available in plans form for homebuilding.
It was designed by Martin Hollmann after a back injury prevented him from flying his previous design on account of not being able to lift the rotor assembly.

Design and development

The Bumble Bee is a simple and lightweight design that can be built to comply with the US FAR 103 Ultralight Vehicles rules, including the category's maximum empty weight of. The aircraft has a standard empty weight of.
The aircraft consists of an open frame based on a keel tube, which supports the nose wheel at the front and the tail at the back. The pilot's seat, the engine and rotor assembly are bolted to the same keel tube. A control stick cyclically controls rotor pitch angle. The powerplant specified is a, twin-cylinder, two-stroke, air-cooled, single ignition Rotax 447 mounted in pusher configuration. The Kawasaki 440 engine has also been used. The landing gear is of tricycle configuration, uses plastic-spoked wheels to reduce weight and does not include suspension. A horizontal tailplane maintains the aircraft pitch angle in flight and a large fin and rudder is provided. The main rotor system is of low-inertia and requires pilot skill to manage energy on landing.
The aircraft plans cost US$160 in 2001. Construction time is estimated as 400 hours, much of which is consumed fabricating the composite rotor blades.

Specifications (ADI Bumble Bee)

Reference: Hollmann